Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: GA-EP45-UD3P and E5200




  1. #1
    Join Date
    Feb 2009
    Posts
    3

    Default GA-EP45-UD3P and E5200

    Sys Specs:

    GIGABYTE GA-EP45-UD3P
    Intel Pentium E5200 Wolfdale 2.5GHz
    OCZ Reaper HPC 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit
    CORSAIR CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC
    SAPPHIRE 100265L Radeon HD 4830 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFire Supported
    ARCTIC COOLING Freezer 7 Pro 92mm CPU Cooler
    Tuniq TX-2 Cooling Thermal Compound
    WinXP Pro SP3

    My first question involves speedfan v.37 vs realtemp v2.7
    I am seeing a difference of 10C between them with speedfan being higher

    I am currently running a FSB of 266
    CPUx12=3.19GHz
    Vcore1=1.275
    Tmax from realtemp is 53C on 10 passes IntelBurn

    What is the safest for
    Vcore?
    and Tmax?

    if Realtemp is more accurate then 53C is temp if Speedfan Is more accurate then 63C is core temp max, i think realtemp is more accurate because at stock everything it is reporting over 60C on Intel Burn.

    Is this a good OC? Any Pointers on what to do next? I am planning to reduce Vcore until unstable then bump up to last setting and the same with my DRAM volts as it is at 2.1 now which my reapers are rated for.

    What benchmark should I run after I reduce the volts to Vmin for stability at this rate?

    Thanks

    Doug

    ps: I have my OCZ memory running at 1064 by reading Profile2 from the memory at 5 5 5 15 timings after messing with everything else and reading the manual, i found that this mobo can read the epp/spd file from my memory and has been running at 532 fsb with 1:2 ratio with the above timings
    Last edited by bkdaaa; 02-05-2009 at 03:29 AM. Reason: added sys specs

  2. #2
    Join Date
    Feb 2009
    Posts
    3

    Default Re: GA-EP45-UD3P and E5200

    bump

  3. #3
    Join Date
    Sep 2008
    Posts
    990

    Default Re: GA-EP45-UD3P and E5200

    Use coretemp to get the CPU temp, speedfan is usually wrong, realtemp might not have been updated since Intel finally released CPU temp data.

    Up to 1.35V in BIOS is perfetly fine as long as your temps stay below 70C

    Is this a good OC? Any Pointers on what to do next? I am planning to reduce Vcore until unstable then bump up to last setting and the same with my DRAM volts as it is at 2.1 now which my reapers are rated for.
    Good :)

    You will need to chage the system memory multiplier if you further increase the CPU FSB to keep the RAM from being overcloked too much.

  4. #4
    Join Date
    Apr 2008
    Posts
    942

    Default Re: GA-EP45-UD3P and E5200

    If you follow the support link on the RealTemp page, you'll find the latest beta, which does take into account the recent disclosure by Intel.

    Edit: In fact you don't have to find the Beta, Version 3 has been released here:-
    http://www.techpowerup.com/downloads...Temp_3.00.html
    GA-P35C-DS3R Rev2.0 F11 bios, E8200 (@3.0Ghz), OCZ DDR3 PC3-10666 Reaper 4GB (@1200Mhz), Xonar D1, 8800GTS 512, Corsair HX520 (Single 12volt line, Max 40A), WDC 3200aaks/5000aaks in AHCI mode, Vista 64 Premium.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •