Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 42

Thread: OverClocking Q6600 in GA-EP45-DS4P F8 Guide Me




  1. #21
    Join Date
    Sep 2008
    Posts
    990

    Default Re: OverClocking Q6600 in GA-EP45-DS4P F8 Guide Me

    when i had P31 i overclocked it by
    different RAMs (valueram) and it was stabble
    I see, the fist screenshot is the P31 board.

    Are settings in that second screenshot 100% stable? Have you tried Prime 95 at those settings? If they're stable I can discard the RAM itself being the problem, as it's obviously capable of running stable on this board.

  2. #22
    Join Date
    Feb 2009
    Posts
    41

    Default Re: OverClocking Q6600 in GA-EP45-DS4P F8 Guide Me

    after running the test am 100% its not RAMS problem
    its bios
    CPU:Intel I7 920 @ 3.6 Ghz
    M.B:GA-x58A-Ud3R
    DisPlay: GA-GTX 260
    Memory: HyperX 3x4GB
    DiskDrive:W.D 1T, W.D 160G
    P.W: HEC 750 W

  3. #23
    Join Date
    Sep 2008
    Posts
    990

    Default Re: OverClocking Q6600 in GA-EP45-DS4P F8 Guide Me

    Could you post the BIOS template again please with the settings as I told you? I'm getting confused as to what we've already tried.

  4. #24
    Join Date
    Feb 2009
    Posts
    41

    Default Re: OverClocking Q6600 in GA-EP45-DS4P F8 Guide Me

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .................: [Auto]
    CPU Clock Ratio ............................: [9x]
    CPU Frequency .............................: 3.00GHz [333 x 9]

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control......................: [Enabled]
    CPU Host Frequency (Mhz) ................: [333]
    PCI Express Frequency (Mhz) .............: 100
    C.I.A.2 ..........................................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive............................: [800mV]
    PCI Express Clock Drive..................: [900mV]
    CPU Clock Skew (ps).....................: [ 0 ps] What this use for ?
    MCH Clock Skew (ps).....................: [0 ps] What this use for ?

    DRAM Performance Control
    Performance Enhance........................: [Standard]
    (G)MCH Frequency Latch....................: [333]
    System Memory Multiplier ..................: [3.20B]
    Memory Frequency (Mhz) ...............: 1066
    DRAM Timing Selectable ..................: [Manual]

    Standard Timing Control
    CAS Latency Time....................... [7]
    tRCD ........................................ [7]
    tRP'.......................................... [7]
    tRAS....................................... [20]

    Advanced Timing Control
    tRRD................................... [7]
    tWTR................................... [Auto]
    tWR.................................... [Auto]
    tRFC................................... [Auto]
    tRTP................................... [Auto]
    Command Rate (CMD) ....................[Auto]




    Driving Strength Profiles
    Driving Strength .........................[1066]


    Channel A
    Static tRead Value..................... [Auto]
    tRD Phase0 Adjustment.................. [Auto]
    tRD Phase1 Adjustment.................. [Auto]
    tRD Phase2 Adjustment ................. [Auto]
    tRD Phase3 Adjustment.................. [Auto]
    Trd2rd(Different Rank)................. [Auto]
    Twr2wr(Different Rank)................. [Auto]
    Twr2rd(Different Rank)................. [Auto]
    Trd2wr(Same/Diff Rank)................. [Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto]

    Channel B
    Static tRead Value..................... [Auto]
    tRD Phase0 Adjustment.................. [Auto]
    tRD Phase1 Adjustment.................. [Auto]
    tRD Phase2 Adjustment ................. [Auto]
    tRD Phase3 Adjustment.................. [Auto]
    Trd2rd(Different Rank)................. [Auto]
    Twr2wr(Different Rank)................. [Auto]
    Twr2rd(Different Rank)................. [Auto]
    Trd2wr(Same/Diff Rank)................. [Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training.....................[Auto]



    Motherboard Voltage Control
    Voltage Type Normal Current
    CPU Vcore........................ 1.325V [Auto]
    CPU Termination.................. [auto]
    CPU PLL............................. 1.500V [1.500V]
    CPU Referen........................ 0.760V [Auto]



    MCH/ICH
    MCH Core........................... 1.100V [Auto]
    MCH Reference.................... 0.760V [Auto]
    MCH/DRAM Ref..................... 0.900V [Auto]
    ICH I/O........................... 1.500V [Auto]
    ICH Core......................... 1.100V [Auto]
    DRAM
    DRAM Voltage..................... 1.800V [2.00V]
    DRAM Termination................. 0.900V [Auto]
    Channel A Reference ............. 0.900V [Auto]
    Channel B Reference ............. 0.900V [Auto]




    its working great at this setting
    CPU:Intel I7 920 @ 3.6 Ghz
    M.B:GA-x58A-Ud3R
    DisPlay: GA-GTX 260
    Memory: HyperX 3x4GB
    DiskDrive:W.D 1T, W.D 160G
    P.W: HEC 750 W

  5. #25
    Join Date
    Sep 2008
    Posts
    990

    Default Re: OverClocking Q6600 in GA-EP45-DS4P F8 Guide Me

    Look here for eplanations of the BIOS settings:
    Gigabyte X48T DQ6 Living Review - Page 2 - Clunk's Forums.

    Keep the RAM at 2.0D for the time being, you can always raise it later when the CPU is stable.

    Try FSB 400, memory 2.0D, VCore 1.45V, loadline calibration on, PLL at 1.7V, MCH Core at 1.24V and CPU Termination at 1.4V. If that doesn't work raise CPU Temrination to 1.45V and see if that helps

  6. #26
    Join Date
    Feb 2009
    Posts
    41

    Default Re: OverClocking Q6600 in GA-EP45-DS4P F8

    any one ?
    CPU:Intel I7 920 @ 3.6 Ghz
    M.B:GA-x58A-Ud3R
    DisPlay: GA-GTX 260
    Memory: HyperX 3x4GB
    DiskDrive:W.D 1T, W.D 160G
    P.W: HEC 750 W

  7. #27
    Join Date
    Sep 2008
    Posts
    990

    Default Re: OverClocking Q6600 in GA-EP45-DS4P F8 Guide Me

    Why "anyone?", the BIOS settings are all explained in the link I gave. If you don't understand something there you need to tell us^^


  8. #28
    Join Date
    Feb 2009
    Posts
    41

    Default Re: OverClocking Q6600 in GA-EP45-DS4P F8

    all i need is right Voltage to set from A to Y
    i mean every voltage in motherboard to hit 3.6 Mhz ++
    CPU:Intel I7 920 @ 3.6 Ghz
    M.B:GA-x58A-Ud3R
    DisPlay: GA-GTX 260
    Memory: HyperX 3x4GB
    DiskDrive:W.D 1T, W.D 160G
    P.W: HEC 750 W

  9. #29
    Join Date
    Sep 2008
    Posts
    990

    Default Re: OverClocking Q6600 in GA-EP45-DS4P F8 Guide Me

    You should have asked about that then ;)

    There are no "right" voltages though, every CPU is different. My guess is that you will need about 1.4-1.45V "real" voltage (as read by CPU-z) under load. Set the FSb to 400.
    Run the RAM at 2.0D first though.


  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OverClocking Q6600 in GA-EP45-DS4P F8 Guide Me

    Still need help? All those settings in Auto is likely a large part of your issues

Page 3 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •