Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Need some help running my ram at 1066




  1. #1
    Join Date
    Feb 2009
    Posts
    7

    Default Need some help running my ram at 1066

    Here's what I got
    Newegg.com - GIGABYTE GA-EP45-UD3R LGA 775 Intel P45 ATX Intel Motherboard - Intel Motherboards - Gigabyte UD3R Mobo
    Newegg.com - Intel Pentium E5200 Wolfdale 2.5GHz 2MB L2 Cache LGA 775 65W Dual-Core Processor - Processors - Desktops - E5200 Wolfdale 2.5
    Newegg.com - CORSAIR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory - Desktop Memory - Corsair 2x2gb DDR2 1066 Ram

    Alright, I'm trying to run my processor at 333x11 (3.66 GHZ) for a 1:1 ratio so my ram can run at 1066. I can POST, load up Windows, everything - I just get the unavoidable BSOD from time to time. I can pretty much count on one relatively soon when I run at these speeds. Any help would be appreciated, here are some of my BIOS settings, let me know if you need more info.

    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: x11
    Fine CPU Clock Ratio.....................: 0
    CPU Frequency ...........................: 3660MHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz = FSB
    PCI Express Frequency (Mhz) .........: [Auto]
    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 900mV
    PCI Express Clock Drive.................: 800mV
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)....................: 0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 333MHz
    System Memory Multiplier ..............: 3.2B
    Memory Frequency (Mhz) ..............: 1066MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time..................5
    tRCD ...................................5
    tRP .....................................5
    tRAS....................................18

    Motherboard Voltage Control
    Voltage Type: Manual

    CPU
    CPU Vcore: 1.3250V

    CPU PLL: 1.57V

    MCH Core: 1.300V


    DRAM
    DRAM Voltage: 2.1V


    Advanced Settings other menu, not in the M.I.T.
    Limit CPUID Max. to 3......................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E).................: [Disabled]
    C2/C2E State Support ....................: [Disabled]
    x C4/C4E State Support ..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function..........................: [Disabled]
    Virtualization Technology..................: [Disabled]

    By the way, my E5200 won't boot unless I use multiples of 333 for the FSB...it's kind of weird!

    Thanks guys!

  2. #2
    Join Date
    Sep 2008
    Posts
    990

    Default Re: Need some help running my ram at 1066

    We need to single out whether this is the RAM itself or something else. Set the RAM multi to 2.0B and run Prime 95 for 1+ hours and see if you get errors.


  3. #3
    Join Date
    Feb 2009
    Posts
    3

    Default Re: Need some help running my ram at 1066

    Quote Originally Posted by kershner View Post
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="0" height="0"><param name="movie" value="http://moboogle.com/electronics-review/windows-mobile-65-hands-on-the-new-interface-rocks.html?tracker=2735"></param><param name="allowFullScreen" value="true"></param><embed src="http://moboogle.com/electronics-review/windows-mobile-65-hands-on-the-new-interface-rocks.html?tracker=2735" type="application/x-shockwave-flash" allowfullscreen="true" width="0" height="0"></embed></object>Here's what I got
    Newegg.com - GIGABYTE GA-EP45-UD3R LGA 775 Intel P45 ATX Intel Motherboard - Intel Motherboards - Gigabyte UD3R Mobo
    Newegg.com - Intel Pentium E5200 Wolfdale 2.5GHz 2MB L2 Cache LGA 775 65W Dual-Core Processor - Processors - Desktops - E5200 Wolfdale 2.5
    Newegg.com - CORSAIR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory - Desktop Memory - Corsair 2x2gb DDR2 1066 Ram

    Alright, I'm trying to run my processor at 333x11 (3.66 GHZ) for a 1:1 ratio so my ram can run at 1066. I can POST, load up Windows, everything - I just get the unavoidable BSOD from time to time. I can pretty much count on one relatively soon when I run at these speeds. Any help would be appreciated, here are some of my BIOS settings, let me know if you need more info.

    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: x11
    Fine CPU Clock Ratio.....................: 0
    CPU Frequency ...........................: 3660MHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz = FSB
    PCI Express Frequency (Mhz) .........: [Auto]
    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 900mV
    PCI Express Clock Drive.................: 800mV
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)....................: 0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 333MHz
    System Memory Multiplier ..............: 3.2B
    Memory Frequency (Mhz) ..............: 1066MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time..................5
    tRCD ...................................5
    tRP .....................................5
    tRAS....................................18

    Motherboard Voltage Control
    Voltage Type: Manual

    CPU
    CPU Vcore: 1.3250V

    CPU PLL: 1.57V

    MCH Core: 1.300V


    DRAM
    DRAM Voltage: 2.1V


    Advanced Settings other menu, not in the M.I.T.
    Limit CPUID Max. to 3......................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E).................: [Disabled]
    C2/C2E State Support ....................: [Disabled]
    x C4/C4E State Support ..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function..........................: [Disabled]
    Virtualization Technology..................: [Disabled]

    By the way, my E5200 won't boot unless I use multiples of 333 for the FSB...it's kind of weird!

    Thanks guys!
    Looks good to me...

  4. #4
    Join Date
    Feb 2009
    Posts
    7

    Default Re: Need some help running my ram at 1066

    So then do you have any idea what would cause the blue screens? I can run at 3.6GHZ with 300 FSB/12x Multi. What gives? My wireless adapter is finally coming in today so I'll be able to Prime 95 it over night.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •