Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 164 of 289 FirstFirst ... 64114154162163164165166174214264 ... LastLast
Results 1,631 to 1,640 of 2882

Thread: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools




  1. #1631
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,692

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Updated with:

    Intel® MicroCode 10 ID 326C3 -Haswell

    MicroCode ID: 0326C310
    CPU ID: 06C3
    Revision: 10
    Dated: 06/20/2013
    Last edited by stasio; 07-27-2013 at 11:05 PM.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  2. #1632
    Join Date
    Jun 2010
    Location
    NL
    Posts
    229

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    is this the one that is going to prevent b85/h87 oc?
    Intel updates microcode to block H87/B85 overclocking | bit-tech.net
    - Z68X-UD3H-B3(rev 1.3), bios F12
    - I5-2500k [3148C059], cooled by scythe mugen2 rev.b with 1500rpm pwm-fan on cpufan header.
    - 8G(2x4G) Corsair Vengeance LP CML8GX3M2A1600C9W,Low profile/Low voltage, DDR1600/C9-1.35v. Slots 1&2.
    - 16G(4x4G) Samsung M378B5273DH0-CH9 1333 @ 2133-c11. w1.55v

    - Seasonic M12D SS850-EM , 850W Semi-Modular PSU with 80A at 12V.
    - 2x EVGA GeForce GTX285-1GB in SLi, 4x 6pin power and bridge connected.[PCIEX_16 and PCIEX_8]
    - Hauppauge HVR2200 PCIE 1x tv-tuner card.[PCIEX1_3]
    - Intel controller in raid mode.
    - 2x WD 500G blacks in raid0 on intel port 0-1.
    - 1x WD 1000G black on intel port 2.
    - 1x OCZ Vertex2 (32nm) on intel port 3.
    - 1x Optiarc DVDRW on intel port 4.
    - 1x Samsung 500G on marvell port 0.
    - 24" LCD monitor @ Geforce 0, lower HDMI port.
    - 17" LCD monitor @ Geforce 0, upper HDMI port.
    - 19" LCD tv @ intel/onboard HDMI.
    - 4ch analoge speakers, cambridge dtt set.
    - internal spdif header connected to Geforce 0.
    - front usb connected.
    - front ac97 connected.
    - front cardreader (usb) connected.
    - rear 4x usb bracket.
    - ms media keyboard, ms comfort mouse. usb, wired.
    - w7x64-sp1.



  3. #1633
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,692

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Look the date above first.
    Even,Intel plan to block H87/B85 overclocking,motherboard manufacturers must implement this in they BIOS.
    Last edited by stasio; 07-28-2013 at 07:18 PM.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  4. #1634
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,692

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Updated with:

    Intel® Management Engine Interface(MEI) Driver 9.5.10.1652 WHQL

    DriverVer=06/10/2013,9.5.10.1580
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  5. #1635
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,692

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Updated with:

    ASRock Timing Configurator 2.0.5

    -memory timing for Haswell system

    Last edited by stasio; 07-30-2013 at 07:09 PM.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  6. #1636
    boondocks's Avatar
    boondocks is offline Senior Member
    Join Date
    Apr 2011
    Location
    Live Oak, Florida
    Posts
    1,652

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    cpuz 1.65 does not show any vcore changes for Z87 UD5H. Is it working for anyone else? It stays stuck on 1.248 for me..... (vcore is set 1.25 but C states active).

    v 1.62.2 is the only other one I had and it works fine.
    Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
    Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
    PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
    Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
    Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

    Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
    HTPC: Z68 Pro3 M / 2105

    SOLD:Z97X-UD5H /4790K/F11b mod BIOS/4.8@1.38 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
    SOLD:Z87X-UD5H /4770K


  7. #1637
    1000moths is offline Junior Member
    Join Date
    Jun 2013
    Location
    United Kingdom
    Posts
    29

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Doesn't work for me either, but then AIDA also fails to show any voltage scaling when I've manually set it. All C states are enabled.

    What I've noticed with my board is that on following the initial boot the CPU VRM value registers as scaling down (in AIDA), the VID stays static at whatever i've set it to in the BIOS. However if I run the AIDA stability test the VRM value increases (as expected) but then fails to drop back down again once the test is stopped (even though the CPU drops to an 8x multiplier). The only way to make it drop is a reboot.


    I'm waiting to get my mitts on a multimeter so I can test.
    ----------------------------------------------------------------------------------------------------------------------------------------------
    Gigabyte Z87X-UD5H BIOS v F6L
    16GB GeIL Dragon RAM PC3-12800C11 1600MHz Dual Channel (2x8GB)
    Intel Core i7 4770k @ 4.7ghz
    2 x EVGA 770GTX SC SLI
    2 x Samsung 840 Pro 120GB SSD (RAID0)
    2 x Hitachi 2TB HDD - (RAID1)
    XFX Pro Series 850w PSU
    Corsair Obsidian 900D
    Cooled with a custom 360 rad and EK Supremacy CSQ Clean block with 6 x Corsair SP120 Quiet fans.

    -------------------------------------------------------------------------------------------------------------------

  8. #1638
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Quote Originally Posted by boondocks View Post
    cpuz 1.65 does not show any vcore changes for Z87 UD5H. Is it working for anyone else? It stays stuck on 1.248 for me..... (vcore is set 1.25 but C states active).

    v 1.62.2 is the only other one I had and it works fine.
    v 1.64.0 is the only version that shows idle voltage for my board.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  9. #1639
    virtualfred's Avatar
    virtualfred is offline Super Moderator
    Join Date
    Mar 2013
    Location
    France
    Posts
    634

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools


  10. #1640
    boondocks's Avatar
    boondocks is offline Senior Member
    Join Date
    Apr 2011
    Location
    Live Oak, Florida
    Posts
    1,652

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    I couldn't find v1.64 but like I say 1.62.2 seems to work OK. I know 1.64 was working for me but I guess I deleted it off my drive when 1.65 came out.
    Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
    Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
    PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
    Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
    Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

    Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
    HTPC: Z68 Pro3 M / 2105

    SOLD:Z97X-UD5H /4790K/F11b mod BIOS/4.8@1.38 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
    SOLD:Z87X-UD5H /4770K


Thread Information

Users Browsing this Thread

There are currently 106 users browsing this thread. (3 members and 103 guests)

  1. f4cg,
  2. GiggaByte,
  3. WinstonAce

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •