Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 74 of 289 FirstFirst ... 2464727374757684124174 ... LastLast
Results 731 to 740 of 2881

Thread: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools




  1. #731
    Join Date
    Oct 2009
    Posts
    23

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Thanks a lot Acebmxer.

    20-25 runs? One of my mates had a BSoD (0x124) after 11 hours of LinX. :( Core i7 2600K, 4GB of RAM out of which he had set 2600MB. That is what makes me a bit doubtful about running LinX only for 20-25 runs. Do not get me wrong please, I do not mean to question what you have written I am just curious to know your opinion. :)
    Last edited by FL00D; 04-07-2011 at 07:16 AM.

  2. #732
    Join Date
    Jun 2010
    Location
    NL
    Posts
    229

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    I think there is no such thing as absolute stability, even at default clocks errors can occur if you (could) test long enough, like millions of hours worth... having said that I agree having a 124 after 11h of linx is doubtful stability in my book too. It all depends on how you would be using the machine I guess, if you never ever have 100% load for more than a few minutes/hours then you can get away with 25 runs, but if you crunch 24/7 you would want extended stability. Getting extended stability is something no test can guarantee, you could test for days without error but still get one the moment you start crunching, so even after all test passed positive, the only real test is using the machine as intended, and if it is without problems, it can be deemed stable for that purpose.
    - Z68X-UD3H-B3(rev 1.3), bios F12
    - I5-2500k [3148C059], cooled by scythe mugen2 rev.b with 1500rpm pwm-fan on cpufan header.
    - 8G(2x4G) Corsair Vengeance LP CML8GX3M2A1600C9W,Low profile/Low voltage, DDR1600/C9-1.35v. Slots 1&2.
    - 16G(4x4G) Samsung M378B5273DH0-CH9 1333 @ 2133-c11. w1.55v

    - Seasonic M12D SS850-EM , 850W Semi-Modular PSU with 80A at 12V.
    - 2x EVGA GeForce GTX285-1GB in SLi, 4x 6pin power and bridge connected.[PCIEX_16 and PCIEX_8]
    - Hauppauge HVR2200 PCIE 1x tv-tuner card.[PCIEX1_3]
    - Intel controller in raid mode.
    - 2x WD 500G blacks in raid0 on intel port 0-1.
    - 1x WD 1000G black on intel port 2.
    - 1x OCZ Vertex2 (32nm) on intel port 3.
    - 1x Optiarc DVDRW on intel port 4.
    - 1x Samsung 500G on marvell port 0.
    - 24" LCD monitor @ Geforce 0, lower HDMI port.
    - 17" LCD monitor @ Geforce 0, upper HDMI port.
    - 19" LCD tv @ intel/onboard HDMI.
    - 4ch analoge speakers, cambridge dtt set.
    - internal spdif header connected to Geforce 0.
    - front usb connected.
    - front ac97 connected.
    - front cardreader (usb) connected.
    - rear 4x usb bracket.
    - ms media keyboard, ms comfort mouse. usb, wired.
    - w7x64-sp1.



  3. #733
    stasio's Avatar
    stasio is online now GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,691

    Smile Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Quadro Driver v270.51 WHQL

    Code:
    http://de.download.nvidia.com/Windows/Quadro_Certified/270.51/270.51-Quadro-winxp-32bit-international-whql.exe
    http://de.download.nvidia.com/Windows/Quadro_Certified/270.51/270.51-Quadro-winxp-64bit-international-whql.exe
    http://de.download.nvidia.com/Windows/Quadro_Certified/270.51/270.51-Quadro-win7-winvista-32bit-international-whql.exe
    http://de.download.nvidia.com/Windows/Quadro_Certified/270.51/270.51-Quadro-win7-winvista-64bit-international-whql.exe
    NVIDIA GPU CUDA Toolkit 4.0 RC2- (APRIL 2011)(Public Availability)

    CUDA Toolkit 4.0 | NVIDIA Developer Zone


    HWiNFO32 v3.72-1207 Beta

    Layout/font change.
    Added reporting of GPU Clocks in Sensors.

    SpeedFan 4.44 Beta 4

    - fixed hysteresis conversion to Fahrenheit an typo
    - hysteresis can now be set to 0 too
    - enabled REMOVE buttons in Fan Control UI
    - added full support for PWM control to F71809

    Realtek High Definition Audio Driver R2.59
    Last edited by stasio; 04-09-2011 at 03:34 PM.

  4. #734
    stasio's Avatar
    stasio is online now GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,691

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Updated with:

    GPU-Z 0.5.3

    Added support for AMD Radeon HD 6790, FirePro V5800
    Added support for GeForce GT 555M, GTX 540M, G315M, Quadro FX 600, FX 2800M, Quadro 4000
    Fixed GeForce GTX 590 release date
    Added support for voltage controllers VT1556, uP6266, uP6218
    Added VDDCI measurement on CHL8228 based ATI cards
    Added capability to show sensors in TechPowerUp OSD Server
    Fixed several crashes and resource leaks

    AIDA64 Extreme Edition v1.60.1351 Beta


    anti-virus software support for DrWeb v6
    firewall software support for DrWeb v6
    identification of new Intel Xeon MP (aka Westmere-EX)
    RAID SMART support is now disabled by default
    Intel Processor Number detection for Core i7-995X
    Intel Processor Number detection for Xeon E7-xxxx
    detection of nVIDIA GeForce GT 520M video chip
    detection of nVIDIA NVS 4200M video chip
    GPU information for nVIDIA GeForce GT 555M (GF106M)
    GPU information for nVIDIA Quadro 1000M (GF108GLM)
    GPU information for nVIDIA Quadro 2000M (GF106GLM)
    GPU information for nVIDIA Quadro 3000M (GF104GLM)
    GPU information for nVIDIA Quadro 4000M (GF104GLM)
    GPU information for nVIDIA Quadro 5010M (GF110GLM)
    HD Audio codec information for nVIDIA GF116
    motherboard specific sensor info for Asus M4A77T
    motherboard specific sensor info for Asus M4A77T/USB3
    motherboard specific sensor info for Asus M4A77TD
    motherboard specific sensor info for Gigabyte G1.Guerrilla


    In this beta we've also applied the following changes of the SensorPanel feature:

    - vertical bars, with a new bar placement option called "3-line"
    - image preview
    - copy-paste (in the right-click context menu on the SensorPanel)
    - SensorPanel Manager / Duplicate button -- to clone an item
    - URL on static labels and images -- the link can be opened by double-clicking on the item on the SensorPanel
    - improved background image handling
    - rendering order has changed to render the bar first -- so now label and/or value and/or unit can be drawn right on the bar, using e.g. the "Embedded" bar placement option
    - fixed: item hiding

    Another sample shot to show off the latest capabilities of the SensorPanel feature:




    Prime95v.26.6 build 3

    1) Occasionally, P-1 stage 2 would report 100% complete before stage 2 completed. This bug has been around forever. I've finally found the cause! Fixed in 26.5 build 2.
    2) Worktodo.txt was not updated properly when P-1 completed for a PRP test. Fixed in 26.5 build 3.
    3) In 26.5 build 3, when benchmarking and measuring CPU speed the program will keep all cores busy by launching auxiliary threads that loop indefinitely. This should prevent Intel Turbo boost from kicking in. This should prevent cases where the CPU speed is reported as 1.87 GHz, yet a benchmark reports very fast timings because the CPU core has been boosted to 3.2 GHz because only one core is active.
    4) In 26.5 build 3, the OS's mapping of hyperthreaded logical CPU numbers to physical CPUs is determined automatically at startup. The AffinityScramble setting (see undoc.txt) is no longer supported. It is replaced by the AffinityScramble2 setting.
    5) In 26.5 build 3, the message "set affinity to run on any cpu" instead listed all the CPU numbers and as well as CPU #31. Fixed in build 4.
    6) In 26.5 build 3 and 4, benchmarking a dual-core non-SSE2 machine will crash. Fixed in build 5.
    7) KeepPminus1SaveFiles=0 option described in undoc.txt did not work when a factor was found. Fixed in 26.6.
    8) The 32K,64K,80K length FFTs with sumout checking for Pentium 4's with 256K or less cache were not implemented. Symptom is a torture test failure. Fixed in 26.6.
    9) Prime95 does not load on Sandy Bridge CPUs running Win XP. I've got a trial fix in 26.6.
    10) Prime95 chooses very inefficient FFT implementations for Core 2 Celerons (they have 512K L2 cache). Working on a fix for for 26.6.
    11) Logical CPU numbers were sometimes output zero-based and sometimes one-based. In 26.6, they are all one-based.
    Last edited by stasio; 04-09-2011 at 09:58 AM.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  5. #735
    Join Date
    Oct 2009
    Posts
    23

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Hello,

    I was wondering if running LinX (or any other CPU stability test for that matter) for days could harm the CPU?

    @ 1.35V (=1.3332V AIDA), 4.5GHz, LLC enabled.

    Thank you.

  6. #736
    stasio's Avatar
    stasio is online now GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,691

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    HWiNFO32 v3.72-1209 Beta

    Intel INF Driver 9.2.3.1010 Alfa

    SiSoftware Sandra Lite 2011.SP1x (2011.5.17.47)

    This update includes a number of minor improvements and bugfixes.
    Last edited by stasio; 04-11-2011 at 06:54 AM.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  7. #737
    GiggaByte is offline Member
    Join Date
    Dec 2007
    Location
    Canada
    Posts
    174

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Quote Originally Posted by FL00D View Post
    Hello,

    I was wondering if running LinX (or any other CPU stability test for that matter) for days could harm the CPU?

    @ 1.35V (=1.3332V AIDA), 4.5GHz, LLC enabled.

    Thank you.

    Not at proper voltage and temperature limits, and I mean official Intel limits that are NOT absolute max. None of this "oh this voltage is safe IF bla bla". The real info we KNOW is correct. That generally means LLC off as well but some think otherwise about LLC... (and go nuts when you tell them to turn it off to follow spec..)

  8. #738
    stasio's Avatar
    stasio is online now GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,691

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Updated with:

    CPU-Z 1.57.1

    -fix bug for Gigabyte B3 boards.
    -added "Dual Channels" notification.

    AIDA64 Extreme Edition v1.60.1355 Beta-Sensor Panel

    In this beta we've implemented the following new features:

    - mass actions: modify, delete, copy-paste (select items with Ctrl-LeftClick on the SensorPanel)
    - SensorPanel Manager / mass actions: move, reorder, modify, delete, hide/unhide, duplicate

    When performing mass modification, the SensorPanel item properties to be altered are marked with a red stripe.

    Note: In this beta we've changed the SensorPanel configuration tags. It will effectively break compatibility with previous SensorPanel beta releases, so you'll have to re-configure all items.

    Realtek RTL8111/8168 Lan Driver-7.042.0304.2011 (Win7 32/64)
    Last edited by stasio; 04-12-2011 at 03:34 PM.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  9. #739
    Join Date
    Jan 2011
    Location
    USA
    Posts
    41

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    Reads Vcore properly on UD7-B3 now.:)

  10. #740
    stasio's Avatar
    stasio is online now GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,691

    Default Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    nVidia GeForce Driver v268.03

    Code:
    http://uk.download.nvidia.com/Windows/268.03/268.03-desktop-winxp-32bit-international-whql.exe
    http://uk.download.nvidia.com/Windows/268.03/268.03-desktop-winxp-64bit-international-whql.exe
    http://uk.download.nvidia.com/Windows/268.03/268.03-desktop-win7-winvista-32bit-international-whql.exe
    http://uk.download.nvidia.com/Windows/268.03/268.03-desktop-win7-winvista-64bit-international-whql.exe
    DriverVer = 04/01/2011, 8.17.12.6803
    This driver adds support for the new GeForce GT 520 GPU.

    Other

    Installs HD Audio driver version 1.2.22.1
    Installs PhysX System Software to version 9.10.0514

    http://uk.download.nvidia.com/Windows/268....lease_Notes.pdf

    OCCT 4.0.0 Beta 5

    Graphs are now in a separate window
    The graph window is resizeable. if it is in float mode, it is maximizable also.
    You will now be asked to include comments in your bug report if you find an error
    Linpack doesn't crash in automatic mode
    Linpack libraries updated

    HWiNFO32 v3.72-1211 Beta

    -fix incorrect CPU report
    Last edited by stasio; 04-15-2011 at 08:37 AM.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

Thread Information

Users Browsing this Thread

There are currently 64 users browsing this thread. (1 members and 63 guests)

  1. lowmotion

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •