Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34

Thread: Gigabyte P35-S3G




  1. #1
    Join Date
    Feb 2009
    Posts
    27

    Default Gigabyte P35-S3G

    My mainboard refuses to o/c at all now. It won't finish the inital RAM check during post. Counts the RAM up then clicks off.
    Once it restarts any changes I've made are still saved to the BIOS bar the frequency which is back to auto.
    I know Gigabyte boards had that wierd not altering issue so I cleared the cmos totaly and booted correctly a few times but this hasn't helped.
    Tried some different RAM of the same timings and also took the RAM timings of auto and ran what it was specified at. No help what so ever.
    Also tried after altering the frequency crontrol I've lower the RAM frequency so that after the o/c its not too fast.
    Haven't altered the voltages as it doesn't get past the RAM check soI don't think that its a lack of power.
    Got the F3 BIOS and also tried the F2 and F4 versions.
    Gigabyte GA-EP45-UD3LR
    E6320 @ 3.15GHz
    Zotac 8800 Amp edition@700/2000
    Thermal take purepower 680W
    Arctic Cooling AC-FRZ-7P Freezer 7 Pro Rev2
    Corsair 4GB Kit (2x2GB) DDR2 800MHz

  2. #2
    Join Date
    Feb 2009
    Posts
    27

    Default Re: Gigabyte P35-S3G

    Searched through here but nothing anyone else has come across helped. i can put a vid up of the exact mommnet it reset if thats a help?
    And the setting I've got, again if that helps. I've looked at the guide and used that as reference using my RAM timings to set it and a much lower FSB speed. But still no joy.
    And as given in the sticky upped my voltages but to no avail.
    Last edited by fire_munki; 02-20-2009 at 03:58 AM.
    Gigabyte GA-EP45-UD3LR
    E6320 @ 3.15GHz
    Zotac 8800 Amp edition@700/2000
    Thermal take purepower 680W
    Arctic Cooling AC-FRZ-7P Freezer 7 Pro Rev2
    Corsair 4GB Kit (2x2GB) DDR2 800MHz

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte P35-S3G

    First off since you have cleared the CMOS, and flashed a few times what you should do as a starter is load optimized defaults and set your ram voltage ONLY and then save/apply/reboot back to the BIOS. Then make all other wanted changes and save/apply/reboot again back to the BIOS to see if they are held or not.

    If they are not, you are likely inputting something wrong, or leaving something in Auto that is wrong. Without a case speaker connected you are not hearing a error beep and upon double or triple reboot the board will revert all settings back to stock (Some values may look the same as you set in the BIOS but some may not, defaults will be loaded in the background)

    One thing you should do on day one when buying memory is test each stick at stock one at a time, that is install one stick in slot one boot the machine and load and apply optimized defaults set your ram voltage ONLY (And set Performance Enhance on Standard) save/apply/reboot and test with memtest86+ for 5 or so passes to be sure you did not receive faulty modules. Do this test on each stick, one at a time >>>
    Memtest86+ - Advanced Memory Diagnostic Tool

    Can you please provide me a link to your Ram so I can best try to offer you some help. For now I will provide you some general 2x2 settings for your setup at stock to see if that helps you any >>>

    These settings are for your complete set, not the single tests but please do put performance enhance on standard for those tests as well.

    Code:
    Robust Graphics Booster___________ [Auto or Fast]
    CPU Clock Ratio ____________ [10] 
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [200] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [4.00C]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ 4/5
    Dram RAS# to CAS# Delay_________4/5
    Dram RAS# Precharge Delay_______4/5
    Precharge Delay (tRAS)__________ 12/15/18
    
    ^^ If your ram is 444-12 set that, if it is 555-15/18 set that ^^^
    
    ACT to ACT Delay (tRRD)_________ 3-4
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-6
    Refresh to ACT Delay______________ 52-62
    Read to Precharge Delay__________ 3-5
    Static tRead Value_______________ 7-12 (Set 8-10 for now)
    Static tRead Phase Adjust________ [Auto] << Always Auto
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] = 2.1V (Set to what you see on ram sticker)
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.2V - +0.3V] << Needed for 2x2GB stability (Not for single stick tests)
    
    CPU Voltage Control_______ [1.25] Auto if not overclocked
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

  4. #4
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,688

    Default Re: Gigabyte P35-S3G

    In the case you need latest BIOS: P35-S3G - F5b
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  6. #6
    Join Date
    Feb 2009
    Posts
    27

    Default Re: Gigabyte P35-S3G

    Put those settings in and I didn't even see the post screen.
    CPUz shows my ram to be: Corsiar PC2 6400 with a part number: cm2x2048-6400CS.
    On the new F5b BIOS too, tried every BIOS going.
    I'm thinking its the RAM but I did tried the same timed Geil sticks in 4*1Gb format.
    Gigabyte GA-EP45-UD3LR
    E6320 @ 3.15GHz
    Zotac 8800 Amp edition@700/2000
    Thermal take purepower 680W
    Arctic Cooling AC-FRZ-7P Freezer 7 Pro Rev2
    Corsair 4GB Kit (2x2GB) DDR2 800MHz

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte P35-S3G

    So did you test each stick one by one?

    I gave ranges above, so you can't just tell me they failed, you need to post what exact settings you set and tried so I can advise back

    Is that CS on that part number or should it be C5?

  8. #8
    Join Date
    Feb 2009
    Posts
    27

    Default Re: Gigabyte P35-S3G

    Sorry, mis type C5.
    Mem settings were:
    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 18


    ACT to ACT Delay (tRRD)_________ 3
    Rank Write to READ Delay________ 3
    Write to Precharge Delay_________ 6
    Refresh to ACT Delay______________ 52
    Read to Precharge Delay__________ 3
    Static tRead Value_______________ 8 (Set 8-10 for now)
    Static tRead Phase Adjust________ [Auto] << Always Auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ 0.300V
    PCI-E OverVoltage Control_ 0.1V
    FSB OverVoltage Control___ 0.1V
    (G)MCH OverVoltage Control 0.2V
    CPU . 1.325V (no increase as no over clock)
    Gigabyte GA-EP45-UD3LR
    E6320 @ 3.15GHz
    Zotac 8800 Amp edition@700/2000
    Thermal take purepower 680W
    Arctic Cooling AC-FRZ-7P Freezer 7 Pro Rev2
    Corsair 4GB Kit (2x2GB) DDR2 800MHz

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte P35-S3G

    K, I just wanted to check about the C5

    Seems that ram is only warrantied to 1.9V, and should run fine at that Voltage. 2.0 would be safe for sure, not sure about 2.1 but it is likely not needed anyway.

    I do see 50% (Well out of 8, but still) gave bad or DOA reviews for this memory at newegg, so you may have a bad set/sets as well >>>
    Newegg.com - CORSAIR XMS2 2GB 240-Pin DDR2 SDRAM DDR2 800 &#40;PC2 6400&#41; Desktop Memory - Desktop Memory

    Try this and see if you get anywhere >>>

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 18


    ACT to ACT Delay (tRRD)_________ 4
    Rank Write to READ Delay________ 4
    Write to Precharge Delay_________ 6
    Refresh to ACT Delay______________ 56
    Read to Precharge Delay__________ 4
    Static tRead Value_______________ 10
    Static tRead Phase Adjust________ [Auto] << Always Auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ 0.1V << Try first, then try +0.2 (after you set this, reboot and check in PC health section and see what these settings are actually giving you as it may be off more then a little, so best to check)

    PCI-E OverVoltage Control_ 0.1V
    FSB OverVoltage Control___ 0.1V
    (G)MCH OverVoltage Control 0.2V << Try .25 or .3, and then try nothing extra as well

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte P35-S3G

    K, I just wanted to check about the C5

    Seems that ram is only warrantied to 1.9V, and should run fine at that Voltage. 2.0 would be safe for sure, not sure about 2.1 but it is likely not needed anyway.

    I do see 50% (Well out of 8, but still) gave bad or DOA reviews for this memory at newegg, so you may have a bad set/sets as well >>>
    Newegg.com - CORSAIR XMS2 2GB 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Desktop Memory - Desktop Memory

    Try this and see if you get anywhere >>>

    CPU Clock Ratio ____________ [10]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [200]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [4.00C] Also try Auto here
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]


    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 18


    ACT to ACT Delay (tRRD)_________ 4
    Rank Write to READ Delay________ 4
    Write to Precharge Delay_________ 6
    Refresh to ACT Delay______________ 56
    Read to Precharge Delay__________ 4
    Static tRead Value_______________ 10
    Static tRead Phase Adjust________ [Auto] << Always Auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ 0.1V << Try first, then try +0.2 (after you set this, reboot and check in PC health section and see what these settings are actually giving you as it may be off more then a little, so best to check)

    PCI-E OverVoltage Control_ 0.1V
    FSB OverVoltage Control___ 0.1V
    (G)MCH OverVoltage Control 0.2V << Try .25 or .3, and then try nothing extra as well

Page 1 of 4 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •