Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: GA-EP45-UD3P 4x2048MB @ DDR-1066Mhz Recommendations...




  1. #11
    Join Date
    Feb 2009
    Posts
    1

    Default Re: GA-EP45-UD3P 4x2048MB @ DDR-1066Mhz Recommendations...

    Maybe im out of place by saying this as im new to overclocking. I have the p45-ud3p w/ e8400 @ 3.8 and patriot vipers 2x2048 @1080mhz. I cant get my memory past this but im getting a new set of memory g.skill pc8800 1100mhz. Hopefully i can get these to 1150mhz
    so i can have my ram running at what my cpu wants it to run at. As far as for running more than 2 stix from what i read its alot trickier than 2 as far as pushing them. You have to start messing with alot of different voltages that im not familiar with. Not sure what brand you got but there is alot of posts on g.skill forum in regards to our board and ppl haveing issues running at 1066mhz. I have not experienced this as im only using to stix for a total of 4 gigs.

  2. #12
    Join Date
    Sep 2008
    Posts
    990

    Default Re: GA-EP45-UD3P 4x2048MB @ DDR-1066Mhz Recommendations...

    I just got a EP45 UD3P as well and I'm about to get a second kit of 2x2GB OCZ Platinum XTC 1066, I'll give you an update when I have them and tell you whether it works or not.


  3. #13
    Join Date
    Sep 2008
    Posts
    990

    Default Re: GA-EP45-UD3P 4x2048MB @ DDR-1066Mhz Recommendations...

    The OCZ Platinum XTC 1066 2x2Gb works for me with 8GB installed. I got some Primer errors after some time but I'm 99.9% sure that his was Auto not giving enough voltage. See here:
    http://forums.tweaktown.com/f69/plea...68/index2.html


Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •