Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: GA-EP45T-DS3R - Tweaking settings.




  1. #11
    Join Date
    Feb 2009
    Posts
    1

    Wink Re: GA-EP45T-DS3R - Tweaking settings.

    Hello,

    This is my first post here, but I've been following the threads for quite a while and found them useful for configuring my rig.

    I thought I mighy help considering I have a similar board and processor:
    MB: GA-EP45-DS4 bios F9
    Processor: E8400 rev E0

    So please find below my settings for 24/7 stable in Orthos/OCCT/IBT (max temp 55C - OCCT and 65C - IBT tests):

    >>>
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .................: Auto
    CPU Clock Ratio .........................: 9x
    Fine CPU Clock Ratio.....................: 0.00
    CPU Frequency ...........................: 4.14GHz (460x9)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control...................: [Enabled]
    CPU Host Frequency (Mhz) ................: 460 MHz
    PCI Express Frequency (Mhz) .............: 100 MHz

    C.I.A.2..................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive..........................: 800 (Stock)
    PCI Express Clock Drive..................: 900 (Stock)
    CPU Clock Skew (ps)......................: 0ps (Stock)
    MCH Clock Skew (ps)......................: 0ps (Stock)


    DRAM Performance Control
    Performance Enhance......................: [Standard]
    Extreme Memory Profile (X.M.P.)..........: <Dont have this option>
    (G)MCH Frequency Latch...................: [400 MHz]
    System Memory Multiplier.................: 2.00D
    Memory Frequency (Mhz).........800Mhz....: 920MHz
    DRAM Timing Selectable...................: [Manual]

    Standard Timing Control
    CAS Latency Time.........................:5
    tRCD.....................................:5
    tRP'.....................................:5
    tRAS.....................................:12

    Driving Strength Profiles
    Driving Strength..........................Auto

    Channel A
    Static tRead Value.......................:9
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment....................:Auto
    tRD Phase2 Adjustment...................:Auto
    tRD Phase3 Adjustment...................:Auto
    Trd2rd(Different Rank)...................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)...................:Auto
    Dimm1 Clock Skew Control.................:Auto ps
    Dimm2 Clock Skew Control.................:Auto ps

    Channel B
    Static tRead Value.......................:9
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment....................:Auto
    tRD Phase2 Adjustment...................:Auto
    tRD Phase3 Adjustment...................:Auto
    Trd2rd(Different Rank)...................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)...................:Auto
    Dimm1 Clock Skew Control.................:Auto ps
    Dimm2 Clock Skew Control.................:Auto ps

    Motherboard Voltage Control
    Voltage Type.............................: Manual
    CPU Vcore..................1.2500........: 1.31875v (1.280v idle / 1.264 load in CPU-z)
    CPU Termination........... 1.200V........: 1.260v
    CPU PLL....................1.500V........: 1.500v
    CPU Reference 1............0.760V........: 0.800v
    CPU Reference 2............0.800V........: 0.838v

    MCH/ICH
    MCH Core...................1.100V........: 1.240v
    MCH Reference..............0.760V........: 0.738v
    MCH/DRAM Ref...............0.900V........: Auto
    ICH I/O....................1.500V........: 1.500v
    ICH Core...................1.100V........: 1.500v

    DRAM
    DRAM Voltage...............1.800V........: 1.98v (2.00 in ET6)
    DRAM Termination...........0.900V........: Auto
    Channel A Reference........0.900V........: Auto
    Channel B Reference........0.900V........: Auto

    Advanced Settings
    Limit CPUID Max. to 3...................:[Disabled]
    No-Execute Memory Protect...............:Enabled
    CPU Enhanced Halt (C1E).................:[Disabled]
    C2/C2E State Support....................:[Disabled]
    x C4/C4E State Support..................:[Disabled]
    CPU Thermal Monitor 2(TM2)..............:[Enabled]
    CPU EIST Function.......................:[Disabled]
    Virtualization Technology...............:[Disabled]

    >>
    Also, please see the screenshots for CPU-Z and ET6 details.

    I hope this helps lowering the voltages a little bit.

    Cheers,
    Pedro
    Last edited by pedro999; 02-26-2009 at 02:57 PM. Reason: Additional Details

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •