Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: EP-43-DS3L memory config.




  1. #21
    Join Date
    Feb 2009
    Location
    California
    Posts
    18

    Default Re: EP-43-DS3L memory config.

    Lsdmeasap, I was away for a week and back. let me tell you that my son showed something while gaming and that is when (CoH gold edition) during the fight in the game all of sudden there is a slight freez like a couple seconds but the game does not stop, could it be memory settings? since your settings he is been able to play well no freez or crashes GOOD! so what i saw is minor but may be you could help a bit more. Here are the seetings I have now, OH i tried on MCH Core 1.300v but i notice the sys. temp when a bit high, so I put back to 1.200v

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [AUTO]
    CPU Clock Ratio ..........................: [8x]
    Fine CPU Clock Ratio.....................:.0 [+0.5]
    CPU Frequency ...........................: 283GHz [333x8.5]


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] [Disabled]
    CPU Host Frequency (Mhz) ............: Mhz 333
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter] [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 0ps
    MCH Clock Skew (ps)...................: <<< 0ps


    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............:[Auto]
    System Memory Multiplier ..............: 3.20B
    Memory Frequency (Mhz) ..............: 1066 1066
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15




    Advanced Timing Control [Press Enter]
    tRRD...........................................4
    tWTR..........................................5
    tWR............................................6
    tRFC...........................................
    62
    tRTP...........................................5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................1066
    Data Driving Pull-up Level and Cmd,Ctrl, and Clk all ending w/driving pull-up.. all in Auto found two sets for channel A and B.

    Channel A
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value..........................:8
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual [Normal] Current
    CPU
    CPU Vcore….……….........................:1.25 [Auto] Auto if not overclocking, if you are overclocking please do find and set your own voltages

    CPU Termination…..... 1.200V*.......:[Auto] << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore. Auto is fine if not overclocking

    CPU PLL…………………....1.500V*.......: 1.550v ---- [Auto]<< If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.5-1.65. Auto is fine if not overclocking

    CPU Referen.…………....0.755V*.......:0.805v---[Auto] <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:Dont have this <<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << [1.200v]
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.55
    ICH Core…………...……1.100V............: <<< 1.14 i don't have this one.

    DRAM
    DRAM Voltage ……....1.800V............: [2.100v]
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave don't have this
    Channel B Reference 0.900V............: <<< Leave don't have this

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [enabled]
    CPU Enhanced Halt (C1E)................: [enabled]
    C2/C2E State Support....................: don't have this
    x C4/C4E State Support..................: don't have this
    CPU Thermal Monitor 2(TM2) ...........: [enabled]
    CPU EIST Function.........................: [enabled]
    Virtualization Technology................: [disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] [enabled]

    Why do you thing the game freezes for a couple of seconds?

    thanks
    ---------
    Mobo-EP-43-DS3L
    CPU-Core 2 Quad Q9550 2.83GHz
    Case- El Diablo from Tagan
    RAM- 4gigs (2x1GB) Modules ballistix 2.1v
    PSU- Thermaltake 850W thoughpower cable management
    HDD- 1 WD 120 gig / 1 Seagate 120 gig
    OS- Vista Home premium 32 bit
    Video card- EVGA GTX 260 896GB DDR3 drivers 182.06

  2. #22
    Join Date
    Feb 2009
    Location
    California
    Posts
    18

    Default Re: EP-43-DS3L memory config.

    Lsdmeasap, I am glad you are back and I know you are pretty busy reading and helping everyone. On my last post I stated something about a slight freez and temperature, I rolled back my video card drivers and the temp. is normal, now how would help me on performance? I listed my settings on my last post. When I came here for looking for help, the game would crash or freez, after the memory adjustment all is better, do you think I need a bit more of adjustment? I would appreciate you help.
    thanks,
    Last edited by Dragunov; 04-17-2009 at 01:43 PM.
    ---------
    Mobo-EP-43-DS3L
    CPU-Core 2 Quad Q9550 2.83GHz
    Case- El Diablo from Tagan
    RAM- 4gigs (2x1GB) Modules ballistix 2.1v
    PSU- Thermaltake 850W thoughpower cable management
    HDD- 1 WD 120 gig / 1 Seagate 120 gig
    OS- Vista Home premium 32 bit
    Video card- EVGA GTX 260 896GB DDR3 drivers 182.06

  3. #23
    Join Date
    Feb 2009
    Location
    California
    Posts
    18

    Default Re: EP-43-DS3L memory config.

    Lsdmeasap, I know that you are very busy helping everyone I hope you can get me a bit stable since the game slightly freezes for a second.
    On my last post I stated something about a slight freez and temperature, I rolled back my video card drivers and the temp. is normal, now how would help me on performance? I listed my settings on my last post. When I came here for looking for help, the game would crash or freez, after the memory adjustment all is better, do you think I need a bit more of adjustment? I would appreciate you help.
    thanks,
    ---------
    Mobo-EP-43-DS3L
    CPU-Core 2 Quad Q9550 2.83GHz
    Case- El Diablo from Tagan
    RAM- 4gigs (2x1GB) Modules ballistix 2.1v
    PSU- Thermaltake 850W thoughpower cable management
    HDD- 1 WD 120 gig / 1 Seagate 120 gig
    OS- Vista Home premium 32 bit
    Video card- EVGA GTX 260 896GB DDR3 drivers 182.06

  4. #24
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP-43-DS3L memory config.

    Well that could be drivers or just the game itself. Can you ask him to play a few other games that are similar in Graphical Content so you can see if it is just that one game or all of them

    Ya I think 1.3 MCH is a bit much, not needed likely. I do think 1.20 may be insufficient though, you may want to try 1.24 and see if temps are ok and if it helps any

    Sorry for the late reply I am still backed up from my absence as well


    Well, I would like to see if you can ask him to try the above mentioned items and voltage change before I advise on tweaking your memory because as you have it now it should be loose enough to not be causing you issues and you may just have game/driver issues or some voltages still need adjusted.

    So let me know if you can do the above game tests and if so what you find out. Ohh also when you test out 1.24 MCH, also test out 1.225 Vtt (Termination). Test that with 1.20 MCH and 1.24 MCH And see if either help with the one game issue you mentioned

  5. #25
    Join Date
    Feb 2009
    Location
    California
    Posts
    18

    Default Re: EP-43-DS3L memory config.

    Lsdmeasap,
    I am the one to say sorry, I know you are an angel and your hands are loaded. I have this question on your statement:

    "So let me know if you can do the above game tests and if so what you find out. Ohh also when you test out 1.24 MCH, also test out 1.225 Vtt (Termination). Test that with 1.20 MCH and 1.24 MCH And see if either help with the one game issue you mentioned"

    On my settings I only see:
    CPU Termination---- Auto

    DRAM Termination......0.900v <<<<leave

    which one do I configure?

    thanks so much.
    ---------
    Mobo-EP-43-DS3L
    CPU-Core 2 Quad Q9550 2.83GHz
    Case- El Diablo from Tagan
    RAM- 4gigs (2x1GB) Modules ballistix 2.1v
    PSU- Thermaltake 850W thoughpower cable management
    HDD- 1 WD 120 gig / 1 Seagate 120 gig
    OS- Vista Home premium 32 bit
    Video card- EVGA GTX 260 896GB DDR3 drivers 182.06

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •