Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L




  1. #11
    Join Date
    Feb 2009
    Posts
    13

    Default Re: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L

    Quote Originally Posted by Dragunov View Post
    Kotvana, did u solve your issue? i have the same mobo. and our tech.Angel hlpd me to solve mine w/my crucials 2x1GB modules i have 4gigs 1066 cl 5-5-5-15 2.2v i followed his devine recommendation to the book and i am stable (prime95) and not having the options you said too.
    What was the solution that tech.Angel provided?

  2. #12
    Join Date
    Feb 2009
    Location
    California
    Posts
    18

    Default Re: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L

    the solution Lsdmeasap gave is here:
    http://forums.tweaktown.com/f69/ep-4...-config-30641/ as i said i have the same MOBO and i was crashing, totaling no stable sys. hope this help.
    thx
    ---------
    Mobo-EP-43-DS3L
    CPU-Core 2 Quad Q9550 2.83GHz
    Case- El Diablo from Tagan
    RAM- 4gigs (2x1GB) Modules ballistix 2.1v
    PSU- Thermaltake 850W thoughpower cable management
    HDD- 1 WD 120 gig / 1 Seagate 120 gig
    OS- Vista Home premium 32 bit
    Video card- EVGA GTX 260 896GB DDR3 drivers 182.06

  3. #13
    Join Date
    Feb 2009
    Posts
    13

    Default Re: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L

    Let me talk to your tech.Angel.... I officially gave up, after trying whatever voltage and timing... Too frustrating, consdinering all any combination except above 800 dual-channel, works when everything is set to Auto... Must be some hardware failure

    Quote Originally Posted by Dragunov View Post
    Kotvana, did u solve your issue? i have the same mobo. and our tech.Angel hlpd me to solve mine w/my crucials 2x1GB modules i have 4gigs 1066 cl 5-5-5-15 2.2v i followed his devine recommendation to the book and i am stable (prime95) and not having the options you said too.

  4. #14
    Join Date
    Feb 2009
    Posts
    13

    Default Re: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L

    Nailed it... but with very lousy timings (5-5-5-18 ONLY), so maybe i'll go back to 800 dual....

    Quote Originally Posted by Lsdmeasap View Post
    Ok, try these and see if you get any better results. This is for stock E5200, and 333 FSB I guess >>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 333 (also tried 266) Either (333 may be better, if you know you have your CPU Voltage ect stable)

    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 9


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333 Mhz (also 266)
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.60B ???? This is not a option! Use 4.00A for 266 FSB, and use 3.20B for 333 FSB)

    Memory Frequency (Mhz) ..............: 1066
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD ........................................5
    tRP'...........................................5
    tRAS..........................................15/18

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-6
    tWR............................................4-6
    tRFC...........................................42-48
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value.........................:6-10
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:6-10
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages

    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore. Auto is fine if not overclocking

    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.5-1.65. Auto is fine if not overclocking

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << try 1.24-1.26, and if no luck try 1.05
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.55
    ICH Core…………...……1.100V............: <<< 1.14

    DRAM
    DRAM Voltage ……....1.800V............: from 2.1v (If your ram sticker says 2.1V then you cannot use 2.2+ or your warranty will be void)


    OCZ Technology | Products | Memory | OCZ DDR2 PC2-8500 Reaper HPC Edition

    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L

    Kotvana if you are using those settings and do not approve please post for me the exact settings you are using now and I will help you lower your timings so they are better.

    As for your main timings, that is all about Ram quality and not many will do better than 555-x at 1066+

  6. #16
    Join Date
    Feb 2009
    Posts
    13

    Default Re: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L

    Thank you very much, LSDMEASAP.
    I used the EXACT settings you gave me, at their highest values (post only that way, at dual mode).
    I did some testings, with 3DMARK06 and EVEREST, and saw no advantage in 1066 5-5-5-18 in comparing to 800 4-4-3-10.
    What do you mean by "Ram quality"? Gaming is my top priority but I also want all the other things to work fast....
    (sry for english, not my native tongue)

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L

    Well what I meant about Ram quality, is some ram is cheap and some is not.

    If you used all the highest settings I posted that will not be the best for performance, that may be why you are unhappy? I post those high values for users to start with, so starting a overclock or getting the system running is easier.

    Once you have it going, you can work your way down on the settings, lowering them one at a time

  8. #18
    Join Date
    Feb 2009
    Posts
    13

    Default Re: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L

    o.k. This is how it finally works for me, 1066 dual channel:

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 333
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: extreme
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 3.20b
    Memory Frequency (Mhz) ..............: 333
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................3
    tWTR..........................................3
    tWR............................................3
    tRFC...........................................42
    tRTP...........................................3
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................auto
    
    Channel A
    Static tRead Value.........................:6
     MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6
     MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.300v
    
    CPU Termination…..... 1.200V
    
    CPU PLL…………………....1.55.
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    [/quote]

  9. #19
    Join Date
    Feb 2009
    Posts
    13

    Default Re: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L

    Now no post at all. Could be my board is defected? What could make it post one day and not the other day, with same exact setting???

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OCZ2RPR10661G on Gigabyte GA-EP43-DS3L

    OK, well I see some issues above in your settings that may be the cause.

    Performance Enhance...................: extreme << Standard for now especially since you are having issues. But I would always leave on standard since you are setting your own tRD (Static tRead)


    tWR............................................3 << Should be at least 5-6

    Channel A + B
    Static tRead Value.........................:6 (Try 7 for now)

    And what do you have set for your Memory voltage? You left that blank in your settings above

    Can you get in the BIOS at all or not? If not, try removing all but one stick in slot one and see if it will then bootup after a double reboot. If that does not work you will have to try to clear the CMOS, see my second post in this thread for my suggested method on doing that >>>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •