Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: EP45-UD3P - G.Skill 1066?




  1. #1
    Join Date
    Feb 2009
    Posts
    3

    Default EP45-UD3P - G.Skill 1066?

    I recently built my first machine with an EP45-UD3P, e8400 and G.Skill 4GB (2x2gb) F2-8500CL5D-4GBPK.
    Runs stable but when I ran CPU-Z, I noticed in the memory tab the following specs:
    DRAM Frequency was listed as 533.3MHz, FSB:DRAM 5:8
    I figure the frequency should be 1066? Or is that actually 1066 with the dual channel? (533x2) I am thinking not because I noticed everyone's DRAM Voltage was set to 2.0-2.1 as suggested and mine is lower.

  2. #2
    Join Date
    Feb 2009
    Posts
    3

    Default Re: EP45-UD3P - G.Skill 1066?

    Here is my info. hope its all you need:

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .................: [Auto]
    CPU Clock Ratio ............................: [9x]
    CPU Frequency .............................: 3.00GHz [333 x 9]

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control......................: [disabled]
    CPU Host Frequency (Mhz) ................: [333]
    PCI Express Frequency (Mhz) .............: Auto
    C.I.A.2 ..........................................: [Disabled]

    DRAM Performance Control
    Performance Enhance........................: [Turbo]
    XMP……………………………………………………[auto]
    (G)MCH Frequency Latch....................: [auto]
    System Memory Multiplier ..................: [auto]
    Memory Frequency (Mhz) ...............: 1066
    DRAM Timing Selectable ..................: [Auto]

    Standard Timing Control
    CAS Latency Time....................... [5]
    tRCD ........................................ [5]
    tRP'.......................................... [5]
    tRAS....................................... [15]

    Advanced Timing Control
    tRRD................................... 4 [Auto]
    tWTR...................................4 [Auto]
    tWR.................................... 13[Auto]
    tRFC................................... .68[Auto]
    tRTP................................... .4 [Auto]
    Command Rate (CMD) .......0 [Auto]


    Driving Strength Profiles
    Driving Strength .........................[Auto]


    Channel A
    Static tRead Value..................... …..6[Auto]
    tRD Phase0 Adjustment..................0[Auto]
    tRD Phase1 Adjustment..................0[Auto]
    tRD Phase2 Adjustment ................. 0[Auto]
    tRD Phase3 Adjustment.................. 0[Auto]
    Trd2rd(Different Rank)................. …8[Auto]
    Twr2wr(Different Rank)................. .8[Auto]
    Twr2rd(Different Rank)................. ..7[Auto]
    Trd2wr(Same/Diff Rank)................. 9[Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto]

    Channel B
    Static tRead Value..................... …..6[Auto]
    tRD Phase0 Adjustment..................0[Auto]
    tRD Phase1 Adjustment..................0[Auto]
    tRD Phase2 Adjustment ................. 0[Auto]
    tRD Phase3 Adjustment.................. 0[Auto]
    Trd2rd(Different Rank)................. …8[Auto]
    Twr2wr(Different Rank)................. .8[Auto]
    Twr2rd(Different Rank)................. ..7[Auto]
    Trd2wr(Same/Diff Rank)................. 9[Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto]



    Motherboard Voltage Control

    CPU Vcore........................ 1.2500v [Auto]
    CPU Termination.................. [1.200][Auto]
    CPU PLL............................. 1.500V [Auto]
    CPU Referen........................ 0.760V [Auto]

    MCH/ICH
    MCH Core........................... 1.100V [Auto]
    MCH Reference.................... 0.760V [Auto]
    MCH/DRAM Ref..................... 0.900V [Auto]
    ICH I/O........................... 1.500V [1.500v]
    ICH Core......................... 1.100V [1.100V]

    DRAM
    DRAM Voltage..................... 1.800V [Auto]
    DRAM Termination................. 0.900V [Auto]
    Channel A Reference ............. 0.900V [Auto]
    Channel B Reference ............. 0.900V [Auto]

    I appreciate any help. I didn't want to tweak settings without knowing what I was doing.

  3. #3
    Join Date
    Jan 2009
    Location
    In. Usa
    Posts
    41

    Default Re: EP45-UD3P - G.Skill 1066?

    Your ram will be 2 times the freqency.
    E7400, Gigabyte P45-UD3P, 2gb Patriot PC28500,
    WD 320 gig HD, Sapphire 4670 DDR4, Corsair VX550
    Xigmatek HDT1283, Antec 300, Xp Pro 32bit

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P - G.Skill 1066?

    ^^ Yeap ^^

    533 x 2 = 1066 (Double Data Rate/DDR2)

    If you need help with anything, or have anymore questions feel free to ask.

    I would make these changes at least for stability >>>

    PCI Express Frequency (Mhz) .............: 100
    C.I.A.2 ..........................................: [Disabled]

    DRAM Performance Control
    Performance Enhance........................: [Turbo] << Standard
    XMP……………………………………………………[auto]
    (G)MCH Frequency Latch....................: [auto]
    System Memory Multiplier ..................:3.20B
    Memory Frequency (Mhz) ...............: 1066
    DRAM Timing Selectable ..................: [Auto]

    Standard Timing Control
    CAS Latency Time....................... [5]
    tRCD ........................................ [5]
    tRP'.......................................... [5]
    tRAS....................................... [15]

    Advanced Timing Control
    tRRD................................... 4 [Auto]
    tWTR...................................4 [Auto]
    tWR.................................... 13[Auto]
    tRFC................................... .52-62
    tRTP................................... .4 [Auto]
    Command Rate (CMD) .......0 [Auto]


    Driving Strength Profiles (A+B)
    Driving Strength .........................1066


    Channel A
    Static tRead Value..................... …..6-8
    tRD Phase0 Adjustment..................0[Auto]
    tRD Phase1 Adjustment..................0[Auto]
    tRD Phase2 Adjustment ................. 0[Auto]
    tRD Phase3 Adjustment.................. 0[Auto]
    Trd2rd(Different Rank)................. …8[Auto]
    Twr2wr(Different Rank)................. .8[Auto]
    Twr2rd(Different Rank)................. ..7[Auto]
    Trd2wr(Same/Diff Rank)................. 9[Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto]

    Channel B
    Static tRead Value..................... …..6-8
    tRD Phase0 Adjustment..................0[Auto]
    tRD Phase1 Adjustment..................0[Auto]
    tRD Phase2 Adjustment ................. 0[Auto]
    tRD Phase3 Adjustment.................. 0[Auto]
    Trd2rd(Different Rank)................. …8[Auto]
    Twr2wr(Different Rank)................. .8[Auto]
    Twr2rd(Different Rank)................. ..7[Auto]
    Trd2wr(Same/Diff Rank)................. 9[Auto]
    Dimm1 Clock Skew Control............... [Auto]
    Dimm2 Clock Skew Control............... [Auto]
    DDR Write Training..................... [Auto]



    Motherboard Voltage Control

    CPU Vcore........................ 1.2500v [Auto]
    CPU Termination.................. [1.200][Auto]
    CPU PLL............................. 1.500V [Auto]
    CPU Referen........................ 0.760V [Auto]

    MCH/ICH
    MCH Core........................... 1.100V << Set 1.2-1.24
    MCH Reference.................... 0.760V [Auto]
    MCH/DRAM Ref..................... 0.900V [Auto]
    ICH I/O........................... 1.500V [1.500v]
    ICH Core......................... 1.100V [1.100V]

    DRAM
    DRAM Voltage..................... 1.800V <<< 2.0-2.1 (2.1 may not be needed, but 2.0 likely is)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •