Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26

Thread: New Build..Working Great...Need help with OC




  1. #21
    Join Date
    Feb 2009
    Posts
    22

    Default Re: New Build..Working Great...Need help with OC

    I've been told not to worry about idle temp too much, but 100% load should be under 65-70 if possible. I try to keep mine below 60. My idle temp right now is at 41. E8500 oc'd to 3.6 GHz.
    Motherboard - Gigabyte GA-EP45-UD3R
    CPU - Intel Core 2 Duo E8500 OC'd 3.6 GHz w/ Zalman CNPS 9700 LED Heatsink/Fan
    Video Card - Visiontek ATI Radeon HD 4850 (512MB)
    Memory - OCZ Reaper HPC 4GB
    PSU - Corsaire CMPSU 550W
    HDD - Western Digital Caviar 320GB
    DVDRW - LITEON 22x w/ lightScribe
    Case - CoolerMaster Centurion 5 Grey



  2. #22
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: New Build..Working Great...Need help with OC

    I dunno what a good idle temp would be for that speed, my CPU has never seen it?

    I get around 32-36 Idle and 53-68 Load temps at 4Ghz (21x190)

    What Idle temp are you seeing, and what load temp? And what program are you using to check these?

    What are you using for 3.2 anyway, and what did you try that failed (Please make two sets of tables so I can see what you are using vs what you tried, thanks)

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. 
    Uncore Frequency .......................... 
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................
    tRCD .......................................
    tRP .........................................
    tRAS .......................................
    
    ##Channel A Advanced Timing Control##
    tRC .........................................
    tRRD .......................................
    tWTR ......................................
    tWR ........................................
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................
    
    
    Channel B
    
    Channel B Timing Settings:
    ##Channel B Standard Timing Control##
    CAS Latency Time ......................
    tRCD .......................................
    tRP .........................................
    tRAS .......................................
    
    ##Channel B Advanced Timing Control##
    tRC .........................................
    tRRD .......................................
    tWTR ......................................
    tWR ........................................
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................
    
    ##Channel B Misc Timing Control##
    Round Trip Latency ...................
    
    
    Channel C
    
    Channel C Timing Settings:
    ##Channel C Standard Timing Control##
    CAS Latency Time ......................
    tRCD .......................................
    tRP .........................................
    tRAS .......................................
    
    ##Channel C Advanced Timing Control##
    tRC .........................................
    tRRD .......................................
    tWTR ......................................
    tWR ........................................
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................
    
    ##Channel C Misc Timing Control##
    Round Trip Latency ...................
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................
    QPI/VTT Voltage 1.150v ............
    CPU PLL 1.800v .......................
    
    MCH/ICH
    PCIE 1.500v ...........................
    QPI PLL 1.100v .......................
    IOH Core 1.100v .....................
    ICH I/O 1.500v .......................
    ICH Core 1.1v ........................
    
    DRAM
    DRAM Voltage 1.500v ..............
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  3. #23
    Join Date
    Feb 2009
    Posts
    12

    Default Re: New Build..Working Great...Need help with OC

    Thanks again for your input. Im at work now so ill grab the settings tonight. Im seeing idle around 42 and thats with the coolermaster n520 and AS5.

    Im starting to read on some other forums and such folks having probs with this board, ill try a few more settings this week, and if still no go I will take it back for an ASUS. Hate to do it, but not sure what else it could be other than something the board doesnt like with my setup.

    However, I shall try some more and i will post tonight my settings that work with 3.2

  4. #24
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: New Build..Working Great...Need help with OC

    I think that may be a average air cooled idle temp, for stock even so I think you are good.

    All boards have their quirks and issues, so you will likely find the same/different with Asus. But good luck in deciding, I can say I don't know of any Asus support forums though.

    It could be your memory, 12GB of it, and just the brand. I have noticed more and more issues lately with that brand. I know you may not want to hear that, but I do have to tell you since I have noticed it

  5. #25
    Join Date
    Feb 2009
    Posts
    12

    Default Re: New Build..Working Great...Need help with OC

    Hey guys, just checking in. I stopped trying to get the over clock to work, I presume its my ram or something so thats fine.

    I have been so busy with my lil fella and his illness that I havent been able to try much, but I didnt want you all to think I didnt appreciate all your suggestions and help :)

    Thanks all

  6. #26
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: New Build..Working Great...Need help with OC

    Well it is likely either the amount or model of the ram that is the issue. Did you get a Asus or keep your Gigabyte?

    Sorry to hear about your little one, hope he gets better soon!!

    Post back whenever you have time, we all know Life comes before the internet for sure!!

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •