Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: OC'ing Q9650 on EP45T-DS3R




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OC'ing Q9650 on EP45T-DS3R

    Title changed!

    Sorry for the late reply again, pretty backed up here still I am says Yoda!

    Just a heads up (For anyone reading) I answer post in a certain way. Normally I try to catch all Zero Replies when I get in, then I start at the very back of the post I have not replied to yet and this lately has been 4-5 pages. So when you bump your thread it moves you actually to the latter part of my being able to get to your thread.

    Nothing meant by that to you POOPonYOU, or anyone else. Just letting you know since you bumped your thread.

    You did not say what speed you want to run at, so how Can I advise????

    Yes you will need to use a program to overclock your GFX Card/Cards such as ATItools or RivaTuner

    So please let me know what you want to run your CPU at, I am just not sure since that post is slower then your first but you wanted more.

    I promise to reply to this this afternoon (I will leave this tab open so it opens with my homepages, that way you wont go to the back of the reply line again)

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OC'ing Q9650 on EP45T-DS3R

    Well, I was here but you was not.....

    I will check back tonight when I get on for sure, please reply to the above.

  3. #13
    Join Date
    Mar 2009
    Posts
    7

    Default Re: OC'ing Q9650 on EP45T-DS3R

    Sorry about the lack of pertinent information. I wanted to shoot for 4.0GHz since I'm using Air to cool my CPU.

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: OC'ing Q9650 on EP45T-DS3R

    You may not be able to get there?

    Try this

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................: 0
    CPU Frequency ...........................: 3.05GHZ (450x9)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 450 Mhz
    PCI Express Frequency (Mhz) .........: Set to 100
    C.I.A.2 .......................................:[Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 900 mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    (G)MCH Frequency Latch...............: AUTO
    System Memory Multiplier ..............: 3.20B
    Memory Frequency (Mhz) ..............: 1440
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.........................: 7-9
    tRCD ..........................................: 7-9
    tRP'............................................: 7-9
    tRAS..........................................: 20-24

    ^^ you may be able to use 777-20 but maybe not? I would try 888-24/999-20 or so first ^^

    Advanced Timing Control
    tRRD...........................................: 4-5
    tWTR..........................................: 4-8
    tWR............................................: 8-12
    tRFC...........................................: 62-82
    tRTP...........................................: 4-6
    Command Rate (CMD) ....................:2


    Channel A
    Static tRead Value.........................: 7-10
    tRD Phase0 Adjustment...................: 0 AUTO
    tRD Phase1 Adjustment...................: 1 AUTO
    tRD Phase2 Adjustment ..................: 0 AUTO
    tRD Phase3 Adjustment...................: 0 AUTO
    Trd2rd(Different Rank).....................: 9 AUTO
    Twr2wr(Different Rank)....................: 7 AUTO
    Twr2rd(Different Rank)....................: 7 AUTO
    Trd2wr(Same/Diff Rank)...................: 10 AUTO
    Dimm1 Clock Skew Control...............:**DON'T SEE THIS OPTION**
    Dimm2 Clock Skew Control...............: **DON'T SEE THIS OPTION**

    Channel B
    Static tRead Value......................... 7-10
    tRD Phase0 Adjustment...................: 0 AUTO
    tRD Phase1 Adjustment...................:**DON'T SEE THIS OPTION**
    tRD Phase2 Adjustment ..................:**DON'T SEE THIS OPTION**
    tRD Phase3 Adjustment...................:**DON'T SEE THIS OPTION**
    Trd2rd(Different Rank)....................:**DON'T SEE THIS OPTION**
    Twr2wr(Different Rank)...................:**DON'T SEE THIS OPTION**
    Twr2rd(Different Rank)....................:**DON'T SEE THIS OPTION**
    Trd2wr(Same/Diff Rank)...................:**DON'T SEE THIS OPTION**
    Dimm1 Clock Skew Control................:**DON'T SEE THIS OPTION**
    Dimm2 Clock Skew Control................:**DON'T SEE THIS OPTION**

    Motherboard Voltage Control
    Voltage Type.………...
    CPU
    CPU Vcore….………..................: 1.3-1.425
    CPU Termination…..................: 1.24-1.34
    CPU PLL…………………................: 1.50-1.58
    CPU Referen.…………................: 0.760V AUTO


    MCH/ICH
    MCH Core…………….....: 1.100V 1.2-1.3 (Likely 1.22-1.28 good)
    MCH Reference….…….: 0.760V AUTO
    MCH/DRAM Ref.…......: 0.750V AUTO
    ICH I/O………………......: 1.500V 1.55


    DRAM
    DRAM Voltage ……......: 1.7-1.8
    DRAM Termination .....: 0.750V AUTO
    Ch-A DATA VRef........: 0.750V AUTO
    Ch-B DATA VRef........: 0.750V AUTO
    Ch-A Address VRef.....: 0.750V AUTO
    Ch-B Address VRef.....: 0.750V AUTO

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [ENABLED]
    Load-Line Calibration......................: [DISABLED]
    CPU Enhanced Halt (C1E)................: [ENABLED] << Disabled
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [ENABLED]
    CPU EIST Function.........................: [ENABLED] << Disabled
    Virtualization Technology.................: [ENABLED]

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •