Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 7 of 7

Thread: shutdown problem vista P45




  1. #1
    Join Date
    Mar 2009
    Posts
    7

    Default shutdown problem vista P45

    EP45-DS5 / VISTA 32BIT / 4GB RAM

    Vista shuts down but the computer fans and lights keep running

    any ideas on this issue from gigabyte guys?

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: shutdown problem vista P45

    Are you sure you are shutting down and not putting your computer to sleep? Just ask to be sure as in Vista the "Shut Down" button is sleep unless you change it or use the popup menu from the buttons to choose shut down.

    So just wanted to check. If you are indeed using Shut down for sure then you may have a System issue with drivers or software causing the hang up, or you could possibly have memory related issues but this is often due to something on the software side of things. Is this a clean install?

  3. #3
    Join Date
    Mar 2009
    Posts
    7

    Default Re: shutdown problem vista P45

    yep, clean install (new pc) and using the shutdown menu not the button

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: shutdown problem vista P45

    Intel INF Chipset drivers installed? Just checking

    Have you Ran Memtest86+ latest version for 5 or more full passes, if not please do >>
    Memtest86+ - Advanced Memory Diagnostic Tool

    Then can you please post your full specs and a link to your ram or the model #, and then give me what settings you are using and I will advise back

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
    
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
    
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  5. #5
    Join Date
    Mar 2009
    Posts
    7

    Default Re: shutdown problem vista P45

    I have 4gb ram installed. I tried removing sticks until down to 2gb with no change. I dont see how ram could cause the pc not to power down??

    Intel Core 2 Quad Q9550 CPU, 2.83 GHz, FSB 1333MHz, 2x6MB L2 Cache, Socket LGA775<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    <o:p> </o:p>
    720W "Gigabyte" Superb Power Supply, Peak Power 720W 120mm Fan, PCI-E(6+2) Conn., 7x SATA Power Connectors, SLI-Ready, 80+Certified, RoHS.<o:p></o:p>
    <o:p> </o:p>
    150Gb SATA 10000 RPM RAPTOR 16Mb CACHE<o:p></o:p>
    <o:p> </o:p>
    <TABLE class=MsoNormalTable style="WIDTH: 100%; mso-cellspacing: 0cm; mso-yfti-tbllook: 1184; mso-padding-alt: 2.25pt 2.25pt 2.25pt 2.25pt" cellSpacing=0 cellPadding=0 width="100%" border=0><TBODY><TR style="mso-yfti-irow: 0; mso-yfti-firstrow: yes"><TD style="BORDER-RIGHT: #f0f0f0; PADDING-RIGHT: 2.25pt; BORDER-TOP: #f0f0f0; PADDING-LEFT: 2.25pt; PADDING-BOTTOM: 2.25pt; BORDER-LEFT: #f0f0f0; PADDING-TOP: 2.25pt; BORDER-BOTTOM: #f0f0f0; BACKGROUND-COLOR: transparent">WD6400AACS <o:p></o:p>
    </TD></TR><TR style="mso-yfti-irow: 1; mso-yfti-lastrow: yes"><TD style="BORDER-RIGHT: #f0f0f0; PADDING-RIGHT: 2.25pt; BORDER-TOP: #f0f0f0; PADDING-LEFT: 2.25pt; PADDING-BOTTOM: 2.25pt; BORDER-LEFT: #f0f0f0; PADDING-TOP: 2.25pt; BORDER-BOTTOM: #f0f0f0; BACKGROUND-COLOR: transparent">GREEN POWER CAVIAR 640GB/7200RPM/SATAII/3.5"/16MB CACHE <o:p></o:p>
    <o:p> </o:p>
    <o:p> </o:p>
    <o:p> </o:p>
    Corsair TWIN2X2048-6400 2GB (2x XMS2 1GB) PC-6400 (800MHz) DDR2 RAM, 2x240-pin DIMMs, Non ECC Unbuffered, 5-5-5-18<o:p></o:p>
    <o:p> </o:p>
    <o:p> </o:p>
    <o:p> </o:p>
    Gigabyte GF9800GTX+ PCI-E 1GB, 256 Bit DDR3,740/2000MHz, 2x Dual DVI, HDTV, Max Res. 2560x1600, Fan<o:p></o:p>
    <o:p> </o:p>
    <o:p> </o:p>
    <o:p> </o:p>
    <o:p> </o:p>
    <o:p> </o:p>
    <o:p></o:p>
    <o:p> </o:p>
    <o:p> </o:p>
    </TD></TR></TBODY></TABLE>

  6. #6
    Join Date
    Mar 2009
    Posts
    7

    Default Re: shutdown problem vista P45

    yep, inf drivers installed off the disk that comes with MB

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: shutdown problem vista P45

    Well if your memory settings or related votlages are incorrect, it could cause these issues. But I often see it myself due to software issues.

    I would install drivers always from the online page for your board as the Disk would be old drivers. You can grab the Intel one direct, here is the latest (You want the second link from the top, the exe) >>
    Download Search Results

    Can you also please post your settings from the MIT page of your BIOS so I can see if anything looks out of the ordinary. And please also post a image of this program running in windows so I can see what settings you are getting for advanced ram timings if you are using Auto >>>
    Tweakers.fr ~ Memset

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •