Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: GA-EX58-UD5 and F3-12800CL9T-6GBNQ




  1. #1
    Join Date
    Mar 2009
    Posts
    2

    Default GA-EX58-UD5 and F3-12800CL9T-6GBNQ

    Hi All,

    Planning to buy GA-EX58-UD5 with g.skill F3-12800CL9T-6GBNQ. I want to put 12 gigs ram in there, max out all the slots. Since it is a 1600 memory, I been reading some place there might be a problem with 12 gig and 1600 memory. Can anyone please confirm?

    For sure I want 12 gigs, so if 1600 for sure has problem, then I go 1333 which in that case would be F3-10666CL9T-6GBNQ.

    I been searching endlessly and I haven't found anything.

    Appreciate any help.

    Regards,
    Mike

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EX58-UD5 and F3-12800CL9T-6GBNQ

    I have seen many users run 12GB @ 1600 1T without much issues so you should be fine

    Of course Auto settings is not likely to work, so you will have to do some tweaking likely

  3. #3
    Join Date
    Mar 2009
    Posts
    2

    Default Re: GA-EX58-UD5 and F3-12800CL9T-6GBNQ

    Thanks for the reply Lsdmeasap.

    I seen the 12 gigs before, basically concern was the particular motherboard and ram combination.

    I am glad I can go and finally finish the build

    Thanks again,
    Mike

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EX58-UD5 and F3-12800CL9T-6GBNQ

    Ahh I thought you just wondered about 12GB @ 1600 from the way you worded it. Ya, I see users using this kit. Here is a Review Site review of that ram, and they used it in 3 GA X58 boards >>>
    G.Skill 6GB PC3-12800 Triple Channel DDR3 Kit Review - Page 3 - Hardware Canucks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •