Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: GA-P35C-DS3R onboard lan problem




  1. #21
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-P35C-DS3R onboard lan problem

    The idea was to remove the driver completely first before re-installing it.

  2. #22
    Join Date
    Mar 2009
    Location
    Sweden
    Posts
    13

    Default Re: GA-P35C-DS3R onboard lan problem

    Quote Originally Posted by Chike View Post
    The idea was to remove the driver completely first before re-installing it.
    already done that.. i have even reinstalled the whole OS and all... still no luck :(

  3. #23
    Join Date
    Mar 2009
    Location
    Sweden
    Posts
    13

    Question Re: GA-P35C-DS3R onboard Lan NIC not working????

    Quote Originally Posted by dellaz View Post
    Hi,
    I had the same problem with two of these motherboards, after hours of messing about i finally got the fix for onboard NIC not working issue.

    Gigabyte has released the latest version of bios and onboard NIC drivers for P35-DS3R. You need to either flash or update the bios first and then reinstall the NIC driver for Realtek.

    If that doesnt work, then you have to reset the motherboard with default factory settings by removing the power ATX connection on the motherboard and cmos battery on the motherboard for couple of minutes. You have to remove both for this to work. After couple of minutes insert the cmos battery back in followed by Power ATX connecter to the motherboard. Power on your pc and this time you will see the NIC light flashing showing there is connectivity. For the NIC light to flash, you need to have the network cable plugged in from either a router or another computer. Boot up and login to windows and open internet explorer to make sure internet is working ok. Hope that helps!!!!

    I think i have to do this since he has had same problems as me... but i need someone that can guide me step by step how to do this, becus i have never done this and i wanna shortcut the motherboard or anything. So if anyone that has done this before and got experience in doing thise kind of stuff and has the time to help me please feel free to send an private message or post here is you like too doesnt reallymatter just that i get the help that is needed, i would be greatfull

  4. #24
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35C-DS3R onboard lan problem

    Please flash your BIOS to the latest BIOS F12 >>
    GIGABYTE - Support&Download - Motherboard - BIOS - GA-P35C-DS3R (rev. 2.1)

    Here is a guide for Qflash, please use this method to update your BIOS >>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

    Clearing CMOS instructions are also in that thread, second post. You wont short your board out or anything at all. It may not be needed anyway though, just flash the BIOS first and see if that fixed things.

    Here is the latest Drivers for your lan, I also advise you update these, can be done before or after the above >>
    Realtek

    I suggest you flash the BIOS and then after loading optimized defaults, and save/apply and rebooting you reset your RAID or disk settings if need be, then check that your LAN is enabled in the BIOS and then on the MAIN Page of the BIOS press F9 and see if you see a MAC Address noted for each LAN. If you do then all is good.

  5. #25

    Default Re: GA-P35C-DS3R onboard Lan NIC not working????

    Quote Originally Posted by ThugAngel View Post
    I think i have to do this since he has had same problems as me... but i need someone that can guide me step by step how to do this, becus i have never done this and i wanna shortcut the motherboard or anything. So if anyone that has done this before and got experience in doing thise kind of stuff and has the time to help me please feel free to send an private message or post here is you like too doesnt reallymatter just that i get the help that is needed, i would be greatfull
    ThuAngel,

    dellaz, was trying to explain how to "Reset CMOS" or "Clear CMOS".

    But the following, is a step by step guide, like you requested.

    How to "Reset CMOS" or "Clear CMOS":

    01. Shut down the PC.
    02. Turn off the "PSU" (Power Supply Unit). The switch is on the back of the "PSU".
    03. Unplug the power chord from the back of the "PSU".
    04. (See page 7 in your manual or this one: GA-P35C-DS3R Manual.)
    05. Either remove the "CMOS" battery ("BAT" in the picture on Page 7) for a few seconds and place it back in, or leave the battery alone and simply use the two pins (labeled, "CLR_CMOS") next to the battery. To use the two pins next to the battery, simply touch both of them simultaneously with a slotted screw driver for one or two seconds. (Much easier than removing the battery.;)
    06. Plug-in the power chord to the back of the PSU.
    07. Turn-on the switch on the back of the PSU.
    08. Start the PC and go into BIOS.
    09. Select "Load Optimized Defaults", save and exit.
    10. Boot into Windows and see if everything works fine.



    Now ask, why "Reset CMOS"?

    Answer: Because "BIOS" may have become corrupted at some point in time.
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  6. #26
    Join Date
    Mar 2009
    Location
    Sweden
    Posts
    13

    Default Re: GA-P35C-DS3R onboard lan problem

    Quote Originally Posted by Lsdmeasap View Post
    how do i know if i have rev. 2.1 and does that matter at all?

  7. #27
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-P35C-DS3R onboard lan problem

    On the left most front side of the mother board near the PCI slot should be a print of the rev.

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •