Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Stable E8400 OC - 3.83




  1. #1
    Join Date
    Jan 2009
    Location
    Virginia, USA
    Posts
    115

    Thumbs up Stable E8400 OC - 3.83

    Just posting this in case it helps anybody out there with a similar configuration. This represents a 28% overclock with very minor voltage bumps for the E8400 with E0 stepping. These settings are for BIOS F7. Configuration in my signature. Please enjoy!

    Code:
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [   9]
    Fine CPU Clock Ratio...................:  +0.0
    CPU Frequency .........................: 3.83GHz
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled] 
    CPU Host Frequency (Mhz) ..............:  426Mhz
    PCI Express Frequency (Mhz) ...........:  100
    
    C.I.A.2 ...............................: [Disabled]
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................:   0ps
    MCH Clock Skew (ps)....................:   0ps
    
    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................:  Auto
    System Memory Multiplier ..............:  2.40B 
    Memory Frequency (Mhz) ................:  1022
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15
    
    Advanced Timing Control
    tRRD...................................: 5
    tWTR...................................: 5
    tWR....................................: 8
    tRFC...................................: 54
    tRTP...................................: 5
    Command Rate (CMD) ....................: 2
    
    Driving Strength Profiles
    Driving Strength ......................: 1066
    
    Channel A
    Static tRead Value.....................:     8
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]
    
    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]
    
    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]
    
    Channel B
    Static tRead Value.....................:     8
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]
    
    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]
    
    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]
    
    Motherboard Voltage Control
    Voltage Type...........................: [Manual]
    
    CPU---------------------Normal-----------Current
    
    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.28750V
    CPU Termination.........1.200V.........: 1.220V
    CPU PLL.................1.500V.........: 1.500V
    CPU Reference...........0.760V.........: [Auto]  
    
    MCH/ICH
    MCH Core................1.100V.........: 1.220V
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V
    ICH Core................1.100V.........: 1.100V
    
    DRAM
    DRAM Voltage............1.800V.........: 2.020V 
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]
    
    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]
    
    Integrated Peripherals
    Legacy USB Storage Detect .............: [Enabled]
    Last edited by Outer Marker; 05-31-2009 at 02:38 AM. Reason: changed required CPU termination voltage
    Gigabyte EP45-UD3R (F7 BIOS)
    Intel Pentium E8400 E0
    Arctic Cooling Freezer 7 Pro
    G.Skill DDR2 1066 (2x2GB) 5-5-5-15 @ 2.0V~2.1V
    EVGA GeForce 9800 GT 512MB
    (3x) Seagate Barracuda 250GB SATA II Drives
    CORSAIR 650TX 650W PSU
    Cooler Master Centurion 5 Case
    XP Professional 32-bit SP3

    Stable E8400 OC - stock voltages
    Stable E8400 OC - 3.83

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •