Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 10 of 10

Thread: GAS-EP45C-DS3R Post Issues.




  1. #1
    Join Date
    Mar 2009
    Location
    Sweden
    Posts
    6

    Default GA-EP45C-DS3R Post Issues.

    Hello .. Recently i gotten a new rig . and it has some issues.
    when it has been turned off like over the night. and i turn it on. fans and leds turns on. and then after a few secs. it shuts down.. and starts again . and this keeps on looping until i cut power. then maybe next start it will post and go juuust before booting os. and stops. now i have to press reset, then it will start just fine.

    where shall i start .. i have default bios settings. Latest F5 i think.
    The rig is as stated in my profile..


    E8600 3,3Ghz
    On a GS-EP45C-DS3R
    OCZ-8500 Reaper HTC 5-5-5-18 2,1v
    Gigabyte GTX-285 1GB PhysX Cuda

    Corsair 750W + Aopen 450W

    adding this. anything more..?
    would be nice if my new rig would be as smooth as my old.

    <TABLE cellSpacing=0 cellPadding=5 width="100%" border=0><TBODY><TR align=left><TD>CPU-Z 1.50 report file
    </TD></TR><TR><TD><TABLE cellSpacing=0 cellPadding=2 width="100%" bgColor=#f0f0f0 border=1><TBODY><TR vAlign=top bgColor=#e0e0ff><TD width="30%"><SMALL>Processor(s)</SMALL></TD><TD vAlign=center><SMALL><SMALL></SMALL></SMALL></TD></TR></TBODY></TABLE></TD></TR><TR><TD><TABLE cellSpacing=0 cellPadding=2 width="100%" bgColor=#f0f0f0 border=1><TBODY><TR vAlign=top><TD width="30%"><SMALL><SMALL>Number of processors</SMALL></SMALL></TD><TD><SMALL><SMALL>1</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Number of cores</SMALL></SMALL></TD><TD><SMALL><SMALL>2 per processor</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Number of threads</SMALL></SMALL></TD><TD><SMALL><SMALL>2 per processor</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Name</SMALL></SMALL></TD><TD><SMALL><SMALL>Intel Core 2 Duo E8600</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Code Name</SMALL></SMALL></TD><TD><SMALL><SMALL>Wolfdale</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Specification</SMALL></SMALL></TD><TD><SMALL><SMALL>Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Package</SMALL></SMALL></TD><TD><SMALL><SMALL>Socket 775 LGA</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Family/Model/Stepping</SMALL></SMALL></TD><TD><SMALL><SMALL>6.7.A</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Extended Family/Model</SMALL></SMALL></TD><TD><SMALL><SMALL>6.17</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Core Stepping</SMALL></SMALL></TD><TD><SMALL><SMALL>E0</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Technology</SMALL></SMALL></TD><TD><SMALL><SMALL>45 nm</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Core Speed</SMALL></SMALL></TD><TD><SMALL><SMALL>1980.1 MHz</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Multiplier x Bus speed</SMALL></SMALL></TD><TD><SMALL><SMALL>6.0 x 330.0 MHz</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Rated Bus speed</SMALL></SMALL></TD><TD><SMALL><SMALL>1320.0 MHz</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Stock frequency</SMALL></SMALL></TD><TD><SMALL><SMALL>3333 MHz</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Instruction sets</SMALL></SMALL></TD><TD><SMALL><SMALL>MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>L1 Data cache (per processor)</SMALL></SMALL></TD><TD><SMALL><SMALL>2 x 32 KBytes, 8-way set associative, 64-byte line size</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>L1 Instruction cache (per processor)</SMALL></SMALL></TD><TD><SMALL><SMALL>2 x 32 KBytes, 8-way set associative, 64-byte line size</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>L2 cache (per processor)</SMALL></SMALL></TD><TD><SMALL><SMALL>6144 KBytes, 24-way set associative, 64-byte line size</SMALL></SMALL></TD></TR></TBODY></TABLE></TD></TR><TR><TD><TABLE cellSpacing=0 cellPadding=2 width="100%" bgColor=#f0f0f0 border=1><TBODY><TR vAlign=top bgColor=#e0e0ff><TD width="30%"><SMALL>Chipset & Memory</SMALL></TD><TD vAlign=center><SMALL><SMALL></SMALL></SMALL></TD></TR></TBODY></TABLE></TD></TR><TR><TD><TABLE cellSpacing=0 cellPadding=2 width="100%" bgColor=#f0f0f0 border=1><TBODY><TR vAlign=top><TD width="30%"><SMALL><SMALL>Northbridge</SMALL></SMALL></TD><TD><SMALL><SMALL>Intel P45/P43/G45/G43 rev. A2</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Southbridge</SMALL></SMALL></TD><TD><SMALL><SMALL>Intel 82801JR (ICH10R) rev. 00</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Graphic Interface</SMALL></SMALL></TD><TD><SMALL><SMALL>PCI-Express</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>PCI-E Link Width</SMALL></SMALL></TD><TD><SMALL><SMALL>x16</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>PCI-E Max Link Width</SMALL></SMALL></TD><TD><SMALL><SMALL>x16</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Memory Type</SMALL></SMALL></TD><TD><SMALL><SMALL>DDR2</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Memory Size</SMALL></SMALL></TD><TD><SMALL><SMALL>4096 MBytes</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Memory Frequency</SMALL></SMALL></TD><TD><SMALL><SMALL>528.0 MHz (5:8)</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>CAS# Latency (tCL)</SMALL></SMALL></TD><TD><SMALL><SMALL>5.0 clocks</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>RAS# to CAS# (tRCD)</SMALL></SMALL></TD><TD><SMALL><SMALL>7 clocks</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>RAS# Precharge (tRP)</SMALL></SMALL></TD><TD><SMALL><SMALL>7 clocks</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Cycle Time (tRAS)</SMALL></SMALL></TD><TD><SMALL><SMALL>15 clocks</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Command Rate (CR)</SMALL></SMALL></TD><TD><SMALL><SMALL>2T</SMALL></SMALL></TD></TR></TBODY></TABLE></TD></TR><TR><TD><TABLE cellSpacing=0 cellPadding=2 width="100%" bgColor=#f0f0f0 border=1><TBODY><TR vAlign=top bgColor=#e0e0ff><TD width="30%"><SMALL>System</SMALL></TD><TD vAlign=center><SMALL><SMALL></SMALL></SMALL></TD></TR></TBODY></TABLE></TD></TR><TR><TD><TABLE cellSpacing=0 cellPadding=2 width="100%" bgColor=#f0f0f0 border=1><TBODY><TR vAlign=top><TD width="30%"><SMALL><SMALL>System Manufacturer</SMALL></SMALL></TD><TD><SMALL><SMALL>Gigabyte Technology Co., Ltd.</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>System Name</SMALL></SMALL></TD><TD><SMALL><SMALL>EP45C-DS3R</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>System S/N</SMALL></SMALL></TD><TD><SMALL><SMALL></SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Mainboard Vendor</SMALL></SMALL></TD><TD><SMALL><SMALL>Gigabyte Technology Co., Ltd.</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Mainboard Model</SMALL></SMALL></TD><TD><SMALL><SMALL>EP45C-DS3R</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>BIOS Vendor</SMALL></SMALL></TD><TD><SMALL><SMALL>Award Software International, Inc.</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>BIOS Version</SMALL></SMALL></TD><TD><SMALL><SMALL>F5</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>BIOS Date</SMALL></SMALL></TD><TD><SMALL><SMALL>12/16/2008</SMALL></SMALL></TD></TR></TBODY></TABLE></TD></TR><TR><TD><TABLE cellSpacing=0 cellPadding=2 width="100%" bgColor=#f0f0f0 border=1><TBODY><TR vAlign=top bgColor=#e0e0ff><TD width="30%"><SMALL>Memory SPD</SMALL></TD><TD vAlign=center><SMALL><SMALL></SMALL></SMALL></TD></TR></TBODY></TABLE></TD></TR><TR><TD><TABLE cellSpacing=0 cellPadding=2 width="100%" bgColor=#f0f0f0 border=1><TBODY><TR vAlign=top><TD width="30%"><SMALL><SMALL>Module 1</SMALL></SMALL></TD><TD><SMALL><SMALL>DDR2, PC2-6400 (400 MHz), 2048 MBytes, OCZ</SMALL></SMALL></TD></TR><TR vAlign=top><TD width="30%"><SMALL><SMALL>Module 2</SMALL></SMALL></TD><TD><SMALL><SMALL>DDR2, PC2-6400 (400 MHz), 2048 MBytes, OCZ</SMALL></SMALL></TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>
    Last edited by Jeppsson; 03-11-2009 at 05:23 PM. Reason: Spelling Error
    My Rig:


    E8600 3,33GHz GA-EP45C-DS3R OCZ DDR2 PC8500 4096MB Reaper HPC Gigabyte GeForce GTX 285

    Zalman CNPS9700LED CPU Cooler

    Corsair Powersupply 750W
    Aopen Powersupply 450W

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GAS-EP45C-DS3R Post Issues.

    Can you please give me a link to your ram so I can check warrantied voltages.

    Then please give me your BIOS settings that you are using and I will advise back >>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
    
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
    
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  3. #3
    Join Date
    Mar 2009
    Location
    Sweden
    Posts
    6

    Default Re: GAS-EP45C-DS3R Post Issues.


    Here:
    OCZ Technology | Products | End of Life | OCZ DDR2 PC2-8500 Reaper HPC 4GB Edition



    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 10x
    Fine CPU Clock Ratio.....................:.+0,0
    CPU Frequency ...........................: 3,33GHz
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled] 
    CPU Host Frequency (Mhz) ............: 333
    PCI Express Frequency (Mhz) .........:Auto
     C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800mV
    PCI Express Clock Drive.................: <<< 900mV
    CPU Clock Skew (ps)....................: <<< 0ps
    MCH Clock Skew (ps)...................: <<< 0ps
    
    
    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....: Auto
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [Auto]
    Memory Frequency (Mhz) ..............: [Auto]
    DRAM Timing Selectable ................: [Auto]
    
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD........................................... 4
    tWTR..........................................4
    tWR............................................6
    tRFC...........................................72
    tRTP...........................................4
    Command Rate (CMD) ....................:0
    
    Driving Strength Profiles
    Driving Strength ............................ Auto
    
    Channel A
    Static tRead Value.........................:6
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6
     tRD Phase0 Adjustment...................:0 Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:0 Auto
     tRD Phase2 Adjustment .................:0 Auto
     tRD Phase3 Adjustment..................:0 Auto
    Trd2rd(Different Rank)....................:8 Auto 
    Twr2wr(Different Rank)...................:8 Auto 
    Twr2rd(Different Rank)...................:7 Auto 
    Trd2wr(Same/Diff Rank)..................:9 Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1,25  Auto 
    CPU Termination…..... 1.200V
    CPU PLL…………………....1.500V
    CPU Referen.…………....0.760V
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly  - Dont have this..  
     
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.760V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
     ICH Core…………...……1.100V............: <<< Leave   Dont have either. 
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    My Rig:


    E8600 3,33GHz GA-EP45C-DS3R OCZ DDR2 PC8500 4096MB Reaper HPC Gigabyte GeForce GTX 285

    Zalman CNPS9700LED CPU Cooler

    Corsair Powersupply 750W
    Aopen Powersupply 450W

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GAS-EP45C-DS3R Post Issues.

    Are you using Vista? Just checking...

    Do you mean YOU Shut off your PC overnight, or the PC ITSELF Shuts off overnight, then you turn it on and have the issues?

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 10x
    Fine CPU Clock Ratio.....................:.+0,0
    CPU Frequency ...........................: 3,33GHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333
    PCI Express Frequency (Mhz) .........:Auto
    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800mV
    PCI Express Clock Drive.................: <<< 900mV
    CPU Clock Skew (ps)....................: <<< 0ps
    MCH Clock Skew (ps)...................: <<< 0ps


    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....: Auto << Disable
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [3.20B]
    Memory Frequency (Mhz) ..............: [1066]
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD........................................... 4
    tWTR..........................................4
    tWR............................................6 << Set 8 for now
    tRFC...........................................72 << Set 62 for now
    tRTP...........................................4
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value.........................:6 << Set 9 for now
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:6 << Set 9 for now
    tRD Phase0 Adjustment...................:0 Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment .................:0 Auto
    tRD Phase3 Adjustment..................:0 Auto
    Trd2rd(Different Rank)....................:8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:7 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1,25 Auto
    CPU Termination…..... 1.200V
    CPU PLL…………………....1.500V
    CPU Referen.…………....0.760V << Set to Auto



    MCH/ICH
    MCH Core…………….....1.100V...........: << try 1.20-1.24-1.28 (Also try 1.05 if you have issues)
    MCH Reference….…….0.760V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< 1.55


    DRAM
    DRAM Voltage ……....1.800V............: << Why do you not set your ram voltage? This is a big issue, set 2.1 for now

    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  5. #5
    Join Date
    Mar 2009
    Location
    Sweden
    Posts
    6

    Default Re: GAS-EP45C-DS3R Post Issues.

    Sorry i was΄nt clear enough in my description..

    Im Using Vista Ultimate 64Bit
    and Yes . when I Shut it down .. it does not shut down on its own..
    My Rig:


    E8600 3,33GHz GA-EP45C-DS3R OCZ DDR2 PC8500 4096MB Reaper HPC Gigabyte GeForce GTX 285

    Zalman CNPS9700LED CPU Cooler

    Corsair Powersupply 750W
    Aopen Powersupply 450W

  6. #6
    Join Date
    Mar 2009
    Location
    Sweden
    Posts
    6

    Default Re: GAS-EP45C-DS3R Post Issues.

    Testing: the settings you supplied.. first i got an emergency beep .
    1hz beeps . like beep beep beep beep ..

    reduced to theese settings.. now vista boots..

    gonna see tomorrow if "she" starts fine after a nights rest.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 10x
    Fine CPU Clock Ratio.....................:.+0,0
    CPU Frequency ...........................: 3,33GHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333
    PCI Express Frequency (Mhz) .........:Auto
    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV
    PCI Express Clock Drive.................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 0ps


    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....: Disable
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [3.20B]
    Memory Frequency (Mhz) ..............: [1066]
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD........................................... 4
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................62
    tRTP...........................................4
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:0 Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment .................:0 Auto
    tRD Phase3 Adjustment..................:0 Auto
    Trd2rd(Different Rank)....................:8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:7 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1,25 Auto
    CPU Termination…..... 1.200V
    CPU PLL…………………....1.500V
    CPU Referen.…………....0.760V Auto



    MCH/ICH
    MCH Core…………….....1.100V...........: 1.05
    MCH Reference….…….0.760V...........; 0.76
    MCH/DRAM Ref.…......0.900V...........: 0.9
    ICH I/O……………….....1.500V............: 1.57 is the closest.


    DRAM
    DRAM Voltage ……....1.800V............: 2.1
    DRAM Termination .…0.900V............: 0.9
    Channel A Reference 0.900V............: 0.9
    Channel B Reference 0.900V............: 0.9

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB[/quote]
    My Rig:


    E8600 3,33GHz GA-EP45C-DS3R OCZ DDR2 PC8500 4096MB Reaper HPC Gigabyte GeForce GTX 285

    Zalman CNPS9700LED CPU Cooler

    Corsair Powersupply 750W
    Aopen Powersupply 450W

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GAS-EP45C-DS3R Post Issues.

    Looks good, if you still find you have issue post your final full settings that you manually set that fail and I will advise back. Once you get stable I will let you know which things you can lower in what order timing wise for your memory that is as you should not have to run them that loose

    Ohh ya, that 1Hz beep is generally a memory timing. I often see it when tRD(Static tRead) is set to low for the Strap/multi and or voltages in use

  8. #8
    Join Date
    Mar 2009
    Location
    Sweden
    Posts
    6

    Default Re: GAS-EP45C-DS3R Post Issues.

    i have been testing and now the rig starts every time.. :D
    playing sims2 or someting may generate a total lockup.. i dunno .

    no temp issues.. . . according to bios probes.
    perhaps some weird stuff.. im pondering exchanging my ramsticks for some Corsair dominator. or if i can get a good suggestion...

    Regards Ola.
    My Rig:


    E8600 3,33GHz GA-EP45C-DS3R OCZ DDR2 PC8500 4096MB Reaper HPC Gigabyte GeForce GTX 285

    Zalman CNPS9700LED CPU Cooler

    Corsair Powersupply 750W
    Aopen Powersupply 450W

  9. #9
    Join Date
    Apr 2009
    Posts
    1

    Default Re: GAS-EP45C-DS3R Post Issues.

    I have the same motherboard and i had the same problem... In my case ram voltage was causing trouble. I have 2 sets of CM2X1024-8500C5D modules. Original voltage is 2.1V but motherboard set it as 1.8. Mostly strange is that i had to set it to 2.2V, since then i had have no problems.

  10. #10
    Join Date
    Mar 2009
    Location
    Sweden
    Posts
    6

    Default Re: GAS-EP45C-DS3R Post Issues.

    ok ... have ordered new mem sticks ,, any ideas what settings may bee good .. ??

    replacing my
    OCZ DDR2 PC8500 4GB KIT, Reaper HPC
    with
    Kingston DDR3 HyperX 1600MHz 4GB
    My Rig:


    E8600 3,33GHz GA-EP45C-DS3R OCZ DDR2 PC8500 4096MB Reaper HPC Gigabyte GeForce GTX 285

    Zalman CNPS9700LED CPU Cooler

    Corsair Powersupply 750W
    Aopen Powersupply 450W

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •