Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: 965P DS3 FSB Prob

  1. #1
    Join Date
    Mar 2009

    Default 965P DS3 FSB Prob

    Hi there this is my set up

    Vista Ultimate
    Mobo ( As Above ) Bios F13
    CPU : P4 661 3.60MHZ
    Kingston Paired 800MHZ 2x 1Gig STicks
    ATI 3650

    Right all this was new when I first booted up all went ok but in the bios under M I T The multiplier was at x18 which I think is normall and the CPU Frequenzy was at 200mhz.
    But when I tried to up the FSB it wouldn't let me.

    Any Suggestions much appreciated.
    P.S The ctrl + F1 dosen't make any difference.

  2. #2
    Join Date
    Nov 2007

    Default Re: 965P DS3 FSB Prob

    what you mean by "wouldnt let you"? You cant increase it over 200MHZ? it doesnt POST over stock speeds?

    Its probably at its limits anyway...OC'ing with an old skool P4 isnt a good idea.

    To really see if you cant go over 200, lower the multiplier to anything below 18x and see if you can up the FSB to 205.
    Asrock P55-Extreme
    Core I5 @ 3.2GHZ
    2x2GB G.skill Ripjaws DDR3 1600
    ASUS HD5850
    1TB Samsung SATA II
    Corsair TX650W PSU

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    PCB Island

    Default Re: 965P DS3 FSB Prob

    As said above, what do you mean by "Wouldn't let you"?

    You should first Load optimized defaults if you have not already, this applies some hidden settings per your hardware, and all visible stock settings will be set as well.

    Yes, the default CPU Multi is 18 for that CPU.
    IntelĀ® PentiumĀ® 4 Processors 661 - SL94V

    More info is needed about what you meant. If you think you need help with your MIT Settings please post me a link to your memory or the model # and then give me the settings you are trying that fail. And please let us know what BIOS version are you using as well. >>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    Performance Enhance = [Standard]
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts