Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Need some help please




  1. #1
    Join Date
    Jan 2009
    Location
    Atlanta Ga
    Posts
    36

    Default Need some help please

    I'm trying to get my sig rig stable @ 4.0. Yeah I know it might not be possable.I have had it running at 3.6 for the last month and as high as 3.9 but it wasnt stable. I'm sorry i cant remember the settings,I have tried to lower the multi to as low as 6 and up the FSB but it just wont post. How do i d/load the templet? I just updated the bios to the lasted 8 on the gigabyte site.Could someone give me some settings to try out.

    My chip E7200 2.53 revision MO

    Thanks in advance
    Thanks
    The Muncher

    Main Rig
    CPU)Q9550@
    MOBO)EP45-UD3P rev.1.0
    RAM) 4g G-Skill 1066
    PSU)Corsair TX-750
    HDD) 2 Seagate 250 Raid-0
    VIDEO)EVGA 275 GTX super clock
    SOUND) Xonar DX 7.1
    MONITOR) Hanns-G 28'WS
    OS) Win 7 64 bit

    Life is like a sheet sandwitch,the more bread you have the less sheet you'll have to eat

  2. #2
    Join Date
    Jan 2009
    Location
    Atlanta Ga
    Posts
    36

    Default Re: Need some help please

    I found a templet that was made by LSDMEASAP for a e5200,its the same core as mine (wolfdale) It running ok.<---I say this because as I'm typing this and listening to music it started to wig out but it didn't shut down. I'm not sure what i need to change.........
    It seems that if i change the setting in the MCH Reference slot the comp wont boot. I'm running at 400x9.5=3.8,I guess I'll have to lower to see it will be stable in prime.I did prime and core 1 failed right away. How do I d/load the templets so I can show on the site?
    Thanks
    The Muncher

    Main Rig
    CPU)Q9550@
    MOBO)EP45-UD3P rev.1.0
    RAM) 4g G-Skill 1066
    PSU)Corsair TX-750
    HDD) 2 Seagate 250 Raid-0
    VIDEO)EVGA 275 GTX super clock
    SOUND) Xonar DX 7.1
    MONITOR) Hanns-G 28'WS
    OS) Win 7 64 bit

    Life is like a sheet sandwitch,the more bread you have the less sheet you'll have to eat

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Need some help please

    Nice avatar!!!

    I think I know you from AB or AW right?

    Please link me to your memory or give me the model #, and then your full settings. To Post the settings you just will have to copy this, fill it in and post it back. >>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
    
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
    
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  4. #4
    Join Date
    Jan 2009
    Location
    Atlanta Ga
    Posts
    36

    Default Re: Need some help please

    How you i repost the templet into my next post?
    Thanks
    The Muncher

    Main Rig
    CPU)Q9550@
    MOBO)EP45-UD3P rev.1.0
    RAM) 4g G-Skill 1066
    PSU)Corsair TX-750
    HDD) 2 Seagate 250 Raid-0
    VIDEO)EVGA 275 GTX super clock
    SOUND) Xonar DX 7.1
    MONITOR) Hanns-G 28'WS
    OS) Win 7 64 bit

    Life is like a sheet sandwitch,the more bread you have the less sheet you'll have to eat

  5. #5
    Join Date
    Jan 2009
    Location
    Atlanta Ga
    Posts
    36

    Default Re: Need some help please

    Quote Originally Posted by Lsdmeasap View Post
    Nice avatar!!!

    I think I know you from AB or AW right?

    Please link me to your memory or give me the model #, and then your full settings. To Post the settings you just will have to copy this, fill it in and post it back. >>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9.5
    Fine CPU Clock Ratio.....................:.0.5
    CPU Frequency ...........................: 400x9.5=3.8
     
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz400
    PCI Express Frequency (Mhz) .........:Set to 100
     
    C.I.A.2 .................................:[Disabled]
     
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 0ps
    MCH Clock Skew (ps)...................: <<< 0ps
     
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled-auto
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 200B
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]
     
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15
     
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
     
    Advanced Timing Control
    tRRD...........................................4 all set by computer
    tWTR..........................................4
    tWR............................................13
    tRFC...........................................68
    tRTP...........................................4
    Command Rate (CMD) ....................:2
     
    Driving Strength Profiles
    Driving Strength ............................1066
     
    Channel A
    Static tRead Value.........................:9 
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH 9
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages 135625v
     
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking 1300v
     
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking 1570v
     
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 0.848v 
     
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
     
    MCH/ICH
    MCH Core…………….....1.100V...........: << any setting otherthen  auto peeps on start up and never posts
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave 1.570v
    ICH Core…………...……1.100V............: <<< Leave 1.00v
     
    DRAM
    DRAM Voltage ……....1.800V............: 2.1v
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
     
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
     
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    E7200 2.52 9.5 multi MO revision
    gigabyte UD3P virson 1.0
    ram Newegg.com - G.SKILL 4GB &#40;2 x 2GB&#41; 240-Pin DDR2 SDRAM DDR2 1066 &#40;PC2 8500&#41; Dual Channel Kit Desktop Memory - Desktop Memory

    No, I dont know you from any other site,I hope this helps. Thanks in advance
    Thanks
    The Muncher

    Main Rig
    CPU)Q9550@
    MOBO)EP45-UD3P rev.1.0
    RAM) 4g G-Skill 1066
    PSU)Corsair TX-750
    HDD) 2 Seagate 250 Raid-0
    VIDEO)EVGA 275 GTX super clock
    SOUND) Xonar DX 7.1
    MONITOR) Hanns-G 28'WS
    OS) Win 7 64 bit

    Life is like a sheet sandwitch,the more bread you have the less sheet you'll have to eat

  6. #6
    Join Date
    Sep 2008
    Posts
    990

    Default Re: Need some help please

    I also have an E7200 here and I have trouble on my EP45 DS3L getting the FSB above 400 MHz, tried all kinds of voltages, RAM is definitely not an issue, nor is cooling. I'll try it on the UD3P tomorrow, but I think these chips jsut don't overclock as well as the E8x00 CPUs do.


  7. #7
    Join Date
    Jan 2009
    Location
    Atlanta Ga
    Posts
    36

    Default Re: Need some help please

    Thanks Nickel020,
    Yeah I think the 8*** are the best o/c-ers
    Thanks
    The Muncher

    Main Rig
    CPU)Q9550@
    MOBO)EP45-UD3P rev.1.0
    RAM) 4g G-Skill 1066
    PSU)Corsair TX-750
    HDD) 2 Seagate 250 Raid-0
    VIDEO)EVGA 275 GTX super clock
    SOUND) Xonar DX 7.1
    MONITOR) Hanns-G 28'WS
    OS) Win 7 64 bit

    Life is like a sheet sandwitch,the more bread you have the less sheet you'll have to eat

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Need some help please

    Hmm, thats odd about you not knowing me. I have seen that same image and Same exact signature used before? Maybe you or him copied it then?

    Ya 7x000's don't clock as well for sure, hence the price

    See if this helps any >>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9.5
    Fine CPU Clock Ratio.....................:.0.5
    CPU Frequency ...........................: 400x9.5=3.8


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: Mhz400 << use 401
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 0ps
    MCH Clock Skew (ps)...................: <<< 0ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 200B << Try 2.00D
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD...........................................4 all set by computer (? Auto you mean? Set manually) 3-4
    tWTR..........................................6
    tWR............................................8
    tRFC...........................................58
    tRTP...........................................4
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................1066

    Channel A
    Static tRead Value.........................:10
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:10
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages 135625v << you may need more then this, this is less once windows starts and even less under load so keep that in mind

    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore. Auto is fine if not overclocking 1300v << Try 1.28 and 1.32-1.34

    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.5-1.65. Auto is fine if not overclocking 1570v

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 0.848v << Use Auto

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.24 (Your Static tRead may be the issue here maybe not?) Try 1.24 and then also try 1.05

    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave 1.570v
    ICH Core…………...……1.100V............: <<< Leave 1.14v

    DRAM
    DRAM Voltage ……....1.800V............: 2.1v
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  9. #9
    Join Date
    Jan 2009
    Location
    Atlanta Ga
    Posts
    36

    Default Re: Need some help please

    What ar the two sites you thought you saw me on?
    Is it the picture?
    or the sheet sandwhich?
    the muncher is just a name i came up with since ive been on this site,most of the time my screen name is Barry.

    The picture i found on the net and have had it beside my name for about a year
    the sheet sandwhich was something my boss told me about 20yrs ago and ive had it in my sig for about a yr in the sites that wont say anything about it

    Im going to try some of your settings,thanks for taking the time to figure it out.
    Thanks
    The Muncher

    Main Rig
    CPU)Q9550@
    MOBO)EP45-UD3P rev.1.0
    RAM) 4g G-Skill 1066
    PSU)Corsair TX-750
    HDD) 2 Seagate 250 Raid-0
    VIDEO)EVGA 275 GTX super clock
    SOUND) Xonar DX 7.1
    MONITOR) Hanns-G 28'WS
    OS) Win 7 64 bit

    Life is like a sheet sandwitch,the more bread you have the less sheet you'll have to eat

  10. #10
    Join Date
    Jan 2009
    Location
    Atlanta Ga
    Posts
    36

    Default Re: Need some help please

    LSDMEASAP,
    I dont know how you come up with these settings but........ my computer is primming its azz off and never get over 60c,your the man
    Thanks
    The Muncher

    Main Rig
    CPU)Q9550@
    MOBO)EP45-UD3P rev.1.0
    RAM) 4g G-Skill 1066
    PSU)Corsair TX-750
    HDD) 2 Seagate 250 Raid-0
    VIDEO)EVGA 275 GTX super clock
    SOUND) Xonar DX 7.1
    MONITOR) Hanns-G 28'WS
    OS) Win 7 64 bit

    Life is like a sheet sandwitch,the more bread you have the less sheet you'll have to eat

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •