Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Lsdmeasap help (ga-ep43-ds3l and e8400)




  1. #11
    Join Date
    Feb 2009
    Posts
    23

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Quote Originally Posted by Lsdmeasap View Post
    Well you could have put a bit more voltage into it, maybe 2.0V with tRD at 8-9 should have worked at 900. But since you did not post your exact settings you tried, I'm not sure why it did not work for you as I suggested. I would have had to see what you set to maybe tell you for sure what to change

    Sorry for the late reply, been getting pretty backed up lately here! Seems we have alot of new members each day here the past few months

    Those you picked should be good, especially at 900, you can tighten them down to maybe 444-12 or 455-12

    Let me know once you get setup if you need more help with those, I will be happy to help you get going
    Ok, I got the new memory in now. So I use the same settings you gave me earlier with this memory? I'll post up settings this time.
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

  2. #12
    Join Date
    Feb 2009
    Posts
    23

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    This is what I have right now. It's been running pretty good so far.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.77


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 419Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D

    Memory Frequency (Mhz) ..............: 838Mhz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................12



    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................5
    tWR............................................6
    tRFC...........................................48
    tRTP...........................................5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................1066

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.300

    CPU Termination…..... 1.200V*.......:1.200
    CPU PLL…………………....1.500V*.......:1.500

    CPU Referen.…………....0.755V*.......:AUTO

    CPU Reference2………,,0.800V*.......:AUTO

    MCH/ICH
    MCH Core…………….....1.100V...........:1.200
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............:1.550
    ICH Core…………...……1.100V............:1.100

    DRAM
    DRAM Voltage ……....1.800V............:2.0
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

  3. #13
    Join Date
    Sep 2008
    Posts
    990

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Looks good! The CPU could go higher, but if you're happy with your current settings just stay there, they're fine for 24/7 use (as long as the pass Prime etc. of course, but I guess they do).


  4. #14
    Join Date
    Feb 2009
    Posts
    23

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Quote Originally Posted by Nickel020 View Post
    Looks good! The CPU could go higher, but if you're happy with your current settings just stay there, they're fine for 24/7 use (as long as the pass Prime etc. of course, but I guess they do).
    I would like to go higher with it. I've been reading alot and most everybody with the e8400 are getting 4.0ghz out of it. Also memory is pretty underclocked. There anyway ( I know their is) to raise memory back to it's factory speed (1066)? I guess that's what you would call it. Also this is my first time having a computer that can be overclocked. So I am still learning about all this stuff. Sorry to seem like a noob.
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    You could try using 2.40B memory multiplier to get 1005Mhz, but if you want 1066 or close to that you will need more or less FSB. As for the above that looks good, did you try 2.00B instead of D?

    Either way a few settings/timings could come down, but we will leave those suggestions not posted until you decide what Speed you do want to run.

  6. #16
    Join Date
    Feb 2009
    Posts
    23

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Quote Originally Posted by Lsdmeasap View Post
    You could try using 2.40B memory multiplier to get 1005Mhz, but if you want 1066 or close to that you will need more or less FSB. As for the above that looks good, did you try 2.00B instead of D?

    Either way a few settings/timings could come down, but we will leave those suggestions not posted until you decide what Speed you do want to run.
    No, I haven't tried 2.40B or 2.00B. I'll give that I try. With my settings right now in cpu-z
    it's showing.

    DRAM Frequency - 419mhz
    FSB:DRAM - 1:1
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •