Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Lsdmeasap help (ga-ep43-ds3l and e8400)




  1. #1
    Join Date
    Feb 2009
    Posts
    23

    Default Lsdmeasap help (ga-ep43-ds3l and e8400)

    I was just wanting to see if you could help me get alittle more mhz out of my e8400. It's at 3.6 right now. Would like to get 4.0mhz. Runs great with no problems at all right now. Here is my settings. Also here is what I have installed.

    MB - ga-ep43-ds3l
    Memory - 2x1gig kingston pc6400 800mhz at 1.8v
    Video Card - Radeon HD 4350
    Cpu cooler - Cooler Master Hyper TX


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:turbo
    CPU Clock Ratio ..........................:9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................:3.600


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 400
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control
    CPU Clock Drive...........................:800
    PCI Express Clock Drive.................:900
    CPU Clock Skew (ps)....................:0
    MCH Clock Skew (ps)...................:0


    DRAM Performance Control
    Performance Enhance...................: [extreme]
    (G)MCH Frequency Latch...............:400
    System Memory Multiplier ..............:2.00D
    Memory Frequency (Mhz) ..............:800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    Advanced Timing Control
    tRRD...........................................AUT O
    tWTR..........................................AUTO
    tWR............................................AUT O
    tRFC...........................................AUT O
    tRTP...........................................AUT O
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................NA

    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:NORMAL
    CPU Termination…..... 1.200V*.......:AUTO
    CPU PLL…………………....1.500V*.......:AUTO

    CPU Referen.…………....0.755V*.......:AUTO

    CPU Reference2………,,0.800V*.......:AUTO

    MCH/ICH
    MCH Core…………….....1.100V...........:AUTO
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............:AUTO
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............:AUTO
    DRAM Termination .…0.900V............:
    Channel A Reference 0.900V............:
    Channel B Reference 0.900V............:

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

  2. #2
    Join Date
    Sep 2008
    Posts
    990

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    First you need to try whether your memory overclocks well enough, because you can only overclock further by increasin the FSB, and that also increases the RAM speed.
    Set RAM timings to 5-5-5-18, voltage to 2.0V, lower the processor multi to 7 or 6 and increase FSB to 450. You may need to icnrease VCore here a bit. Set FSB Termiantion to 1.30V and CPU PLL to 1.55V. Set static tRead to 10 or Auto, Performance Enhance should be Standard.
    If this is stable, try increasing the multiplier back to 9 and increase VCore, you will probably need about 1.4V in BIOS to get this stable.


  3. #3
    Join Date
    Feb 2009
    Posts
    23

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Quote Originally Posted by Nickel020 View Post
    First you need to try whether your memory overclocks well enough, because you can only overclock further by increasin the FSB, and that also increases the RAM speed.
    Set RAM timings to 5-5-5-18, voltage to 2.0V, lower the processor multi to 7 or 6 and increase FSB to 450. You may need to icnrease VCore here a bit. Set FSB Termiantion to 1.30V and CPU PLL to 1.55V. Set static tRead to 10 or Auto, Performance Enhance should be Standard.
    If this is stable, try increasing the multiplier back to 9 and increase VCore, you will probably need about 1.4V in BIOS to get this stable.
    Alright, I'll give that a try.
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Can you please post a link to your ram?

    Ya, as said above your ram need to overclock little to hit 4Ghz. It needs to do at least 900, and it may or may not without voltages outside your warranty (if that matter to you) if it is only 1.8V rated ram

    Here is what you want to get at for 4Ghz, but please do link me to your ram or give me the model # so I can check it out

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 4.05


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 450Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D (2.00B may work for you as well, it would be better but is harder to get stable often at high FSB)

    Memory Frequency (Mhz) ..............: 900Mhz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4/5
    tRCD .........................................4/5
    tRP'...........................................4/5
    tRAS..........................................15/18

    ^^ Not all ram will do 900 at 444-12, and especially not at 1.8V so you will want to start with 555-18 ^^

    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-5
    tWR............................................4-6
    tRFC...........................................42-48
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................800/1066 (Test both)

    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.25-1.36 (All up to your chip)

    CPU Termination…..... 1.200V*.......: <<< 1.2-1.36 (1.2-1.28 likely plenty)
    CPU PLL…………………....1.500V*.......: << 1.5-1.58

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.2-1.3 (1.22-1.26 likely good)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.5-1.6
    ICH Core…………...……1.100V............: <<< 1.1x-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1 (Check your ram sticker or wait for my reply)
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  5. #5
    Join Date
    Feb 2009
    Posts
    23

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Quote Originally Posted by Lsdmeasap View Post
    Can you please post a link to your ram?

    Ya, as said above your ram need to overclock little to hit 4Ghz. It needs to do at least 900, and it may or may not without voltages outside your warranty (if that matter to you) if it is only 1.8V rated ram

    Here is what you want to get at for 4Ghz, but please do link me to your ram or give me the model # so I can check it out

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 4.05


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 450Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D (2.00B may work for you as well, it would be better but is harder to get stable often at high FSB)

    Memory Frequency (Mhz) ..............: 900Mhz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4/5
    tRCD .........................................4/5
    tRP'...........................................4/5
    tRAS..........................................15/18

    ^^ Not all ram will do 900 at 444-12, and especially not at 1.8V so you will want to start with 555-18 ^^

    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-5
    tWR............................................4-6
    tRFC...........................................42-48
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................800/1066 (Test both)

    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.25-1.36 (All up to your chip)

    CPU Termination…..... 1.200V*.......: <<< 1.2-1.36 (1.2-1.28 likely plenty)
    CPU PLL…………………....1.500V*.......: << 1.5-1.58

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.2-1.3 (1.22-1.26 likely good)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.5-1.6
    ICH Core…………...……1.100V............: <<< 1.1x-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1 (Check your ram sticker or wait for my reply)
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    Alright here is a link to my ram.

    Kingston Technology Company - Kingston Memory Search - Search Results for: KVR800D2N5K2/2G
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

  6. #6
    Join Date
    Feb 2009
    Posts
    23

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Quote Originally Posted by Lsdmeasap View Post
    Can you please post a link to your ram?

    Ya, as said above your ram need to overclock little to hit 4Ghz. It needs to do at least 900, and it may or may not without voltages outside your warranty (if that matter to you) if it is only 1.8V rated ram

    Here is what you want to get at for 4Ghz, but please do link me to your ram or give me the model # so I can check it out

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 4.05


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 450Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D (2.00B may work for you as well, it would be better but is harder to get stable often at high FSB)

    Memory Frequency (Mhz) ..............: 900Mhz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4/5
    tRCD .........................................4/5
    tRP'...........................................4/5
    tRAS..........................................15/18

    ^^ Not all ram will do 900 at 444-12, and especially not at 1.8V so you will want to start with 555-18 ^^

    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-5
    tWR............................................4-6
    tRFC...........................................42-48
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................800/1066 (Test both)

    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.25-1.36 (All up to your chip)

    CPU Termination…..... 1.200V*.......: <<< 1.2-1.36 (1.2-1.28 likely plenty)
    CPU PLL…………………....1.500V*.......: << 1.5-1.58

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.2-1.3 (1.22-1.26 likely good)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.5-1.6
    ICH Core…………...……1.100V............: <<< 1.1x-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1 (Check your ram sticker or wait for my reply)
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    Well here is the model # KVR800D2K2/2GR on both.
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Thanks, all those settings would be fine for that memory. And I think you will be fine using 1.85-1.9V or so for your ram as the datasheet lists (+1.8V (+/- .1V)).

    Now, that still does not mean you can for sure run it at 900Mhz, but it makes your chances better

    Did you get time to try anything yet?

  8. #8
    Join Date
    Feb 2009
    Posts
    23

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Quote Originally Posted by Lsdmeasap View Post
    Thanks, all those settings would be fine for that memory. And I think you will be fine using 1.85-1.9V or so for your ram as the datasheet lists (+1.8V (+/- .1V)).

    Now, that still does not mean you can for sure run it at 900Mhz, but it makes your chances better

    Did you get time to try anything yet?
    Ya, I tried the setting you gave me and no go. All it did was reboot, beeped 23-24 short beeps, then reset itself back to 3.0ghz. I spent like an 1 1/2 hr. trying different settings and the highest FSB I was able to get was 417. That gave me 3.75ghz. This ram won't do 900mhz. I think this memory is holding me back so I was thinking about getting some better memory. I was thinking PC28500 1066. Probably 2x1gig sticks for right now. Do you have any recommendation on memory? Thanks for your help.
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

  9. #9
    Join Date
    Feb 2009
    Posts
    23

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Quote Originally Posted by Lsdmeasap View Post
    Thanks, all those settings would be fine for that memory. And I think you will be fine using 1.85-1.9V or so for your ram as the datasheet lists (+1.8V (+/- .1V)).

    Now, that still does not mean you can for sure run it at 900Mhz, but it makes your chances better

    Did you get time to try anything yet?
    I went ahead today and got Welcome to Corsair :: Dominator Product Information. Hopefully this will help. Model # TWIN2X2048-8500C5D.
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Lsdmeasap help (ga-ep43-ds3l and e8400)

    Well you could have put a bit more voltage into it, maybe 2.0V with tRD at 8-9 should have worked at 900. But since you did not post your exact settings you tried, I'm not sure why it did not work for you as I suggested. I would have had to see what you set to maybe tell you for sure what to change

    Sorry for the late reply, been getting pretty backed up lately here! Seems we have alot of new members each day here the past few months

    Those you picked should be good, especially at 900, you can tighten them down to maybe 444-12 or 455-12

    Let me know once you get setup if you need more help with those, I will be happy to help you get going

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •