Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 9 of 9

Thread: Q6600 @ 3.6G + GA-EP45T-EXTREME + Patriot Viper 1333MHz




  1. #1
    Join Date
    Mar 2009
    Location
    Melbourne, Australia
    Posts
    13

    Default Q6600 @ 3.6G + GA-EP45T-EXTREME + Patriot Viper 1333MHz

    Hi All,

    I've just managed to OC my Q6600 to 3.6G with the following setting:

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ................[Auto]
    CPU Clock Ratio ........................[ 9 X]
    CPU Frequency ..........................3.60GHz( 400x9)

    ********** Clock Chip Control **********
    >>>>> Standard Clock Control
    CPU Host Clock Control..................[Enabled]
    CPU Host Frequency (Mhz) ...............[ 400]
    PCI Express Frequency (Mhz) ............[100]
    C.I.A.2 ......................................[Disabled]
    >>>>> Advanced Clock Control
    > Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................[ 800mV]
    PCI Express Clock Drive.................[ 900mV]
    CPU Clock Skew (ps).....................[ 150ps]
    MCH Clock Skew (ps)....................[ 250ps]

    ******** DRAM Performance Control ********
    Performance Enhance......................[Standard]
    Extreme Memory Profile (X.M.P.).........[Disabled]
    (G)MCH Frequency Latch..................[Auto]
    System Memory Multiplier .................[3.33D]
    Memory Frequency (Mhz) ................. 1333
    DRAM Timing Selectable .................[Manual]

    >>>>> Standard Timing Control
    CAS Latency Time........................[7]
    tRCD ........................................[7]
    tRP ..........................................[7]
    tRAS.........................................[20]

    >>>>> Advanced Timing Control
    > Advanced Timing Control
    tRRD........................................[AUTO]
    tWTR......................................[AUTO]
    tWR........................................[AUTO]
    tRFC.......................................[AUTO]
    tRTP.......................................[AUTO]
    Command Rate (CMD) ................[AUTO]

    Channel A Timing Settings
    Static tRead Value.........................[AUTO]
    tRD Phase0 Adjustment...................[AUTO]
    tRD Phase1 Adjustment...................[AUTO]
    tRD Phase2 Adjustment ..................[AUTO]
    tRD Phase3 Adjustment...................[AUTO]
    Trd2rd(Different Rank)....................[AUTO]
    Twr2wr(Different Rank)...................[AUTO]
    Twr2rd(Different Rank)...................[AUTO]
    Trd2wr(Same/Diff Rank)..................[AUTO]

    <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

    Channel B Timing Settings
    Static tRead Value.........................[AUTO]
    tRD Phase0 Adjustment...................[AUTO]
    tRD Phase1 Adjustment...................[AUTO]
    tRD Phase2 Adjustment ..................[AUTO]
    tRD Phase3 Adjustment...................[AUTO]
    Trd2rd(Different Rank)....................[AUTO]
    Twr2wr(Different Rank)...................[AUTO]
    Twr2rd(Different Rank)....................[AUTO]
    Trd2wr(Same/Diff Rank)..................[AUTO]<o:p></o:p>

    **** Mother Board Voltage Control ****
    Voltage Types Normal Current
    >>> CPU
    CPU Vcore.....................1.325V.......[1.50000V]

    CPU Termination.............1.200V..........[1.300V]

    CPU PLL........................1.500V..........[1.500V]

    >>> MCH/ICH
    MCH Core......................1.100V..........[1.400V]
    MCH Reference...............0.760V..........[Auto]
    ICH I/O.........................1.500V..........[1.500V]

    >>> DRAM
    DRAM Voltage................1.500V..........[1.7V]
    DRAM Termination...........0.900V..........[Auto]
    Ch-A Data VRef………........0.750V..........[Auto]
    Ch-B Data VRef………........0.750V..........[Auto]<o:p></o:p>
    Ch-A Address Vref…………..0.750V………….[Auto]<o:p></o:p>
    Ch-B Address Vref…………..0.750V………….[Auto]<o:p></o:p>

    Advanced Settings
    CPU Multi-Threading..........................[Enabled]
    Limit CPUID Max. to 3........................[Disabled]
    No-Execute Memory Protect...............[Enabled]
    CPU Enhanced Halt (C1E)..................[Disabled]
    CPU Thermal Monitor 2(TM2) .............[Disabled]
    CPU EIST Function...........................[Disabled]
    Virtualization Technology..................[Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]<o:p></o:p>

    I was wondering what improvements could be made to these settings at the current OC ?

    The Idle temps for the CPU are 47, 44, 42 and 45.

    Best regards,

    Cosmos S.
    __________________________________________________ __________________________
    Q6600 @ 3.8GHz - GA-EP45T-Extreme - PVS34G1333LLK Patriot Extreme Performance Viper Series DDR3 4GB (2 x 2GB) PC3-10666 Low Latency DIMM Kit - Aquagate MAX, CPU and NB underwater - 1GB ATI HD4870 - 300GB WD Veloci Raptor - Corsair HX620W - Cosmos S case.

  2. #2
    Join Date
    Jan 2009
    Location
    Brisbane, Australia
    Posts
    75

    Default Re: Q6600 @ 3.6G + GA-EP45T-EXTREME + Patriot Viper 1333MHz

    What are you load temps?

    They are more important then idle.

    Also do u need to use 1.5vcore? Have u tried lower?
    CPU: Intel C2Q Q6600 G0 @ 3.2GHz W/ 1.184v (Max Overclock - 4.1GHz ON AIR)
    Mobo: Gigabyte EP45-UD3P (Max Overclock - 515FSB)
    RAM: CellShock 2GB PC2-8500 @ 1200MHz 5-5-5-15 (Max Overclock - 1300MHz 5-4-4-12)
    Video Card: Gainward HD4870 GS @ 775MHz/4000MHz (Max Overclock - 835MHz/1175MHz)
    Case: Antec 1200

  3. #3
    Join Date
    Mar 2009
    Location
    Melbourne, Australia
    Posts
    13

    Default Re: Q6600 @ 3.6G + GA-EP45T-EXTREME + Patriot Viper 1333MHz

    Hi Fatguy1992,

    The load temps were around 70 when stressed out to 100%.

    I've tried the Vcore at 1 or two notches lower but then it would'nt run as stable.

    regards,

    Cosmos S.
    __________________________________________________ __________________________
    Q6600 @ 3.8GHz - GA-EP45T-Extreme - PVS34G1333LLK Patriot Extreme Performance Viper Series DDR3 4GB (2 x 2GB) PC3-10666 Low Latency DIMM Kit - Aquagate MAX, CPU and NB underwater - 1GB ATI HD4870 - 300GB WD Veloci Raptor - Corsair HX620W - Cosmos S case.

  4. #4
    Join Date
    Jan 2009
    Location
    Brisbane, Australia
    Posts
    75

    Default Re: Q6600 @ 3.6G + GA-EP45T-EXTREME + Patriot Viper 1333MHz

    Well 70C is pretty hot. What cooling are you using? Also what is your room temp?

    Also its a shame u can't lower the Vcore any lower :(
    CPU: Intel C2Q Q6600 G0 @ 3.2GHz W/ 1.184v (Max Overclock - 4.1GHz ON AIR)
    Mobo: Gigabyte EP45-UD3P (Max Overclock - 515FSB)
    RAM: CellShock 2GB PC2-8500 @ 1200MHz 5-5-5-15 (Max Overclock - 1300MHz 5-4-4-12)
    Video Card: Gainward HD4870 GS @ 775MHz/4000MHz (Max Overclock - 835MHz/1175MHz)
    Case: Antec 1200

  5. #5
    Join Date
    Mar 2009
    Location
    Melbourne, Australia
    Posts
    13

    Default Re: Q6600 @ 3.6G + GA-EP45T-EXTREME + Patriot Viper 1333MHz

    Hi Fatguy1992,

    The systems temporarily air cooled but that will change after the 17th of this month when my water cooling kit arrives.

    I was hoping with a few more tweaks that I could also drop the Vcore a bit.

    I dont know whether the settings I listed in the post are fully optimised.

    I was hoping that Lsdmeasap or anybody else may have some sugestions.

    Regards,

    Cosmos s
    __________________________________________________ __________________________
    Q6600 @ 3.8GHz - GA-EP45T-Extreme - PVS34G1333LLK Patriot Extreme Performance Viper Series DDR3 4GB (2 x 2GB) PC3-10666 Low Latency DIMM Kit - Aquagate MAX, CPU and NB underwater - 1GB ATI HD4870 - 300GB WD Veloci Raptor - Corsair HX620W - Cosmos S case.

  6. #6
    Join Date
    Jan 2009
    Location
    Brisbane, Australia
    Posts
    75

    Default Re: Q6600 @ 3.6G + GA-EP45T-EXTREME + Patriot Viper 1333MHz

    You could try adjusting Clock Skews, Clock Drive and CPU/MCH References.
    CPU: Intel C2Q Q6600 G0 @ 3.2GHz W/ 1.184v (Max Overclock - 4.1GHz ON AIR)
    Mobo: Gigabyte EP45-UD3P (Max Overclock - 515FSB)
    RAM: CellShock 2GB PC2-8500 @ 1200MHz 5-5-5-15 (Max Overclock - 1300MHz 5-4-4-12)
    Video Card: Gainward HD4870 GS @ 775MHz/4000MHz (Max Overclock - 835MHz/1175MHz)
    Case: Antec 1200

  7. #7
    Join Date
    Mar 2009
    Location
    Melbourne, Australia
    Posts
    13

    Default Re: Q6600 @ 3.6G + GA-EP45T-EXTREME + Patriot Viper 1333MHz

    Yes I could have a bit more of a play with them.

    Are you sugesting that If I reduce them a little that I may not need to have The Vcore as high?
    __________________________________________________ __________________________
    Q6600 @ 3.8GHz - GA-EP45T-Extreme - PVS34G1333LLK Patriot Extreme Performance Viper Series DDR3 4GB (2 x 2GB) PC3-10666 Low Latency DIMM Kit - Aquagate MAX, CPU and NB underwater - 1GB ATI HD4870 - 300GB WD Veloci Raptor - Corsair HX620W - Cosmos S case.

  8. #8
    Join Date
    Jan 2009
    Location
    Brisbane, Australia
    Posts
    75

    Default Re: Q6600 @ 3.6G + GA-EP45T-EXTREME + Patriot Viper 1333MHz

    I wasn't meaning for you to decrease or increase them in particular. Just play around and see what happens (thats what I do sometimes).
    CPU: Intel C2Q Q6600 G0 @ 3.2GHz W/ 1.184v (Max Overclock - 4.1GHz ON AIR)
    Mobo: Gigabyte EP45-UD3P (Max Overclock - 515FSB)
    RAM: CellShock 2GB PC2-8500 @ 1200MHz 5-5-5-15 (Max Overclock - 1300MHz 5-4-4-12)
    Video Card: Gainward HD4870 GS @ 775MHz/4000MHz (Max Overclock - 835MHz/1175MHz)
    Case: Antec 1200

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q6600 @ 3.6G + GA-EP45T-EXTREME + Patriot Viper 1333MHz

    Do you still need any help/suggestions with this or did you get it all smoothed over and stable?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •