Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Overclocking EP45-UD3P and Q6600 G0




  1. #11
    Join Date
    Oct 2009
    Location
    USA
    Posts
    3

    Default Re: Overclocking EP45-UD3P and Q6600 G0

    Quote Originally Posted by fatguy1992 View Post
    Heres my 3.6GHz, well with more Vcore cause I can run stock Vcore for 3.6GHz

    Code:
    MB Intelligent Tweaker(M.I.T.)
    
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9
    CPU Frequency ...........................: 3.60 (400*9)
    
    Clock Chip Control
    
    Standard Clock Control
    
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 400 Mhz
    PCI Express Frequency (Mhz) .........:100
    C.I.A.2 .................................:[Disabled]
    
    Advanced Clock Control [Press Enter]
    
    CPU Clock Drive...........................: 700mv
    PCI Express Clock Drive.................: 700mv
    CPU Clock Skew (ps)....................: 0 ps
    MCH Clock Skew (ps)...................: 0 ps
    
    DRAM Performance Control
    
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 400MHz
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]
    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15
    
    Advanced Timing Control
    
    tRRD........................................... Auto
    tWTR.......................................... Auto
    tWR............................................ Auto
    tRFC........................................... Auto
    tRTP........................................... Auto
    Command Rate (CMD) ....................: Auto
    
    Driving Strength Profiles
    
    Driving Strength ............................800
    
    Channel A
    Static tRead Value.........................: 8
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Channel B
    Static tRead Value.........................: 8
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Motherboard Voltage Control
    
    CPU
    LLC............................................: Enabled
    CPU Vcore….……….........................: 1.45v
    CPU Termination…..... 1.200V*.......: 1.30v
    CPU PLL…………………....1.500V*.......: 1.5v
    CPU Referen.…………....0.755V*.......: 0.863v
    
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.2v
    MCH Reference….…….0.760V...........: 0.803v upto 0.863v
    MCH/DRAM Ref.…......0.900V...........: 1.0v
    ICH I/O……………….....1.550V............: 1.57v
    ICH Core…………...……1.100V............: 1.1v
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.0v
    DRAM Termination .…0.900V............: 1.0v
    Channel A Reference 0.900V............: 1.0v
    Channel B Reference 0.900V............: 1.0v
    
    Advanced Settings
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Disabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    I hope that helps, but every CPU is different.
    Quote Originally Posted by Chike View Post
    What coller do you have, under what load and ambiant temperature you had those temps?
    Maybe you don't need all that vcore, what is your CPU VID?

    I have the Sunbeamtech Core-Contact Feeezer. Here's the thing I've set my vcore at 1.48v in Bios it booted fine, but when I ran LinX or IBT it failed. In addition, at 1.48v I was getting very high temps to around 85 C.
    My CPU ID showed Core voltage of 1.44 or it was around 1.45V.

    Do you think I should try to re-apply Shin Etsu? The Core Temp shows VID of 1.3000v.

    I got it OC'd stable at 8x400 FSB gave me 3.2Ghz running it @ 1000 Mhz 2.2V
    Vcore was set to 1.3625V and Everest showing Core voltage of 1.25-1.31V.

    And my temps are max 67C on full load while running IBT on 5 runs with Maximum Stress level. Which passed. Any suggestions on if I can get it stable at 3.6Ghz 400x9 FSB would be nice.
    Last edited by soulz9; 10-21-2009 at 12:04 PM.

  2. #12
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Overclocking EP45-UD3P and Q6600 G0

    Cooler seems to be solid but I am not familiar with the Shin Etsu, is it any good?
    At 3.6GHz my E7200 get to 73c at 32 ambiant and it hs only 2 cores so it may be you'd have to sattle for a bit less than 3.6GHz 3.4 or 3.5.
    I also hear not al Q6600 can do 3.6GHz.
    I suggest you make your own thread, post your settings using the template from this post, add your system specs to your forum signature including a link to your ram specs, and people will be able to advise.

  3. #13
    Join Date
    Oct 2009
    Location
    USA
    Posts
    3

    Default Re: Overclocking EP45-UD3P and Q6600 G0

    Quote Originally Posted by Chike View Post
    Cooler seems to be solid but I am not familiar with the Shin Etsu, is it any good?
    At 3.6GHz my E7200 get to 73c at 32 ambiant and it hs only 2 cores so it may be you'd have to sattle for a bit less than 3.6GHz 3.4 or 3.5.
    I also hear not al Q6600 can do 3.6GHz.
    I suggest you make your own thread, post your settings using the template from this post, add your system specs to your forum signature including a link to your ram specs, and people will be able to advise.

    From comparison Shin Etsu tends to get the best temps over a period of time, if you perform the burn in period of 200 Hours. I guess I'll stick with 3.2 Ghz, I don't really need the extra mhz, but it would be nice to achieve it. Thanks alot anyways.

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •