Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 11 of 11

Thread: Can't get GA-EP45-DS3L board to run with two 2gb dimms (memtest causes reboot)




  1. #11
    Join Date
    Apr 2009
    Posts
    2

    Default Re: Can't get GA-EP45-DS3L board to run with two 2gb dimms (memtest causes reboot)

    Quote Originally Posted by Lsdmeasap View Post
    Ahh well I mean OLD as in the code is not updated for today's technology. It was for a long time not supported/updated by the Author. Only recently they started updating it again and borrowed some coding from Memtest86+ 2.11 for SOME newer chipsets as you can see here >>
    Memtest86 - Memory Diagnostic Change Log Page

    Also, there is this Memtest, by HCI Design, that you can run in windows. I use this with Memtest86+ >>
    MemTest: RAM reliability tester for Windows

    @Jake94, please give me your settings you use that fail for both sticks and I can help >>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.4ghz have tried 3.0
     
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled] 
    CPU Host Frequency (Mhz) ............: 266 have tried 333
    PCI Express Frequency (Mhz) .........:Set to 100
     
    C.I.A.2 .................................:[Disabled]
     
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
     
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Auto
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: Auto have tried 2.00D
    Memory Frequency (Mhz) ..............: 1066
    DRAM Timing Selectable ................: [Auto]
     
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15 these are corsair specs
     
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
     
    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................68
    tRTP...........................................4
    Command Rate (CMD) ....................:0 
    Driving Strength Profiles
    Driving Strength ............................Auto
     
    Channel A
    Static tRead Value.........................:4
    MCH
     tRD Phase0 Adjustment...................:0
    well
    tRD Phase1 Adjustment...................:0
     tRD Phase2 Adjustment .................:1
     tRD Phase3 Adjustment..................:1
    Trd2rd(Different Rank)....................:8
    Twr2wr(Different Rank)...................:8
    Twr2rd(Different Rank)...................:7
    Trd2wr(Same/Diff Rank)..................:9
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Channel B
    Static tRead Value.........................:4
    MCH
     tRD Phase0 Adjustment...................:0
    well
    tRD Phase1 Adjustment...................:0
     tRD Phase2 Adjustment .................:1
     tRD Phase3 Adjustment..................:1
    Trd2rd(Different Rank)....................:8
    Twr2wr(Different Rank)...................:8
    Twr2rd(Different Rank)...................:7
    Trd2wr(Same/Diff Rank)..................:9
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Motherboard Voltage Control
     
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
     
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
     
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
     
    CPU Referen.…………....0.76V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
     
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
     
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.760V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
     
    DRAM
    DRAM Voltage ……....2.100v............: Corsair spec
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
     
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
     
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

    All are pretty much stock spec's..I did try a small overclock nothing the q6600 can't handle...As i said before on there own no problem but together crash after crash...Memtest86 2.11 they fail on stock timmings and stock speed

    Here's the link to the Ram spec's
    h**p://www.corsair.com/_datasheets/TWIN2X4096-8500C5D.pdf
    Last edited by jake94; 04-08-2009 at 05:11 AM.

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •