Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 7 123 ... LastLast
Results 1 to 10 of 63

Thread: 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066




  1. #1

    Default 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066

    Hello Everyone.

    You may read my previous thread here:

    http://forums.tweaktown.com/f69/ex38...-pq-ram-27990/

    As reccomended, I purchased the Gigabyte EP45-UD3R MB to replace my EX38-DQ6 one from before. I Also purchased some new RAM. Team Xtreeme Dark 2x2gb DDR1066. I have now given up with my 8GB Gskills for the time being.

    My ambitions remain the same, id like solid settings for 333x9 * 1000/1066mhz and 500x8 * 1000/1066 when running my E8400.

    At stock, (333x9) everything is stable, but sluggish when starting up and occationally programs stop working (same problem as before with my DQ6) Suddenly stopped working, random memory errors etc.

    Having tried different settings, i have found something strange. If I leave all my memory and driving settings on Auto, everything works fine. When however I slacken the settings to understand my max CPU speed, the system is unstable.


    Here are my settings at the moment:

    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 8]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 4.00GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 500Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ................: 1000
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15

    Advanced Timing Control
    tRRD...................................: [Auto]
    tWTR...................................: [Auto]
    tWR....................................: [Auto]
    tRFC...................................: [Auto]
    tRTP...................................: [Auto]
    Command Rate (CMD) ....................: [Auto]

    Driving Strength Profiles
    Driving Strength ......................: 1066

    Channel A
    Static tRead Value.....................: [Auto]
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Channel B
    Static tRead Value.....................: [Auto]
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.4000V
    CPU Termination.........1.200V.........: 1.360V
    CPU PLL.................1.500V.........: 1.500V
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.340V
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V
    ICH Core................1.100V.........: 1.100V

    DRAM
    DRAM Voltage............1.800V.........: 2.200V
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............: [Disabled]

    These settings make my PC freeze on startup, either at post or bios setup screen, as of right now i cant get in the bios at all, after previously getting a checksum error.
    Its quite funny, because with my EX38 board, getting to 4ghz wasnt a problem, but this one it seems it is.

    The settings that i can do stock are 333x9, 3.20b multi and ram 5,5,5,15 everthing else sluggish.

    I really have spent so much time researching threads in these forums, allthough much are of great help, none of the settings have helped me...

    Really hope to gain some suggestions here.

    Cheers

    Dodge
    Last edited by Dodgexander; 03-14-2009 at 07:22 PM.
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

  2. #2
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066

    I found this today while looking for hi fsb with my Q8200,there is some action on E8400 there as well.
    GIGABYTE GA-EP45-UD3P OC Reivew

    settings (fine tuning), i only know mine,but funnily enough auto on everything except main mem timing,the ram multiplier(B or D) and the 3 main voltages got me into os npat the max speed I can get.
    Last edited by Lsdmeasap; 03-14-2009 at 03:59 PM.
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  3. #3

    Default Re: 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066

    Well leaving things on Auto apart from Cpu v and mch v here are my results:

    8x500. 2.00D 4ghz 1000mhz. v1.400
    6x500 2.00d 3.19gz 1066. v1.300 v1.340
    6x550 2.00d 3.30ghz 1100. v1.400 v1.340
    7x550 2.00d 3.83ghz 1100 v1.400 v1.340

    Id like to get 550x7.5 to get above the 4ghz mark but system BSODs any suggestions how i can do this? My temp under load using Intel Burn test is 73 max, not sure i can add more v to that.

    Also, is there a way instead to loosen advance mem timings/drive to rais fsb further?
    Last edited by Lsdmeasap; 03-14-2009 at 03:59 PM.
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

  4. #4

    Default Re: 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066

    Grr just realised I named this thread wrongly, its infact 2 x 2gb, not 2x4gb:P

    I have managed stable also with the following 9x445 2.00d 890mhz 5,4,4,11
    Last edited by Lsdmeasap; 03-14-2009 at 03:58 PM.
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066

    Title Corrected for ya

    I would suggest more PLL for sure, and maybe less Vtt, but maybe not.... I would also raise ICH I/O to 1.55, and ICH Core to 1.14-1.2

    You should be able to loosen (manually set) your ram to be able to raise the FSB

    Maybe your AUTO on static tRead is too low. Can you please post me a screenshot of Memset so I can see what all you are getting for the Auto's?

    Aside from the Auto's and maybe you need more vcore all looks like it should be ok. So I think using Auto for one or more of those ram timings may be what is holding you back.

    Since you are jumping around, post what you got (Settings and Memset image) to as of late that you want help with and I can try to help ya.

  6. #6

    Default Re: 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066

    This board is far more challenging compared to my EX38 previously in terms of OC settings, but it pays off, as unlike before, it is possible now for me to test differences between configurations and overclocks, before my EX38 was completely Randomly causing instability.

    Ok, ive tried a few more possibilities such as raising PLL and Static T read to 12 each time.

    I have 3 configs im working on, one of which is 100% stable, which I suppose is good for comparison.But id like help with all 3.I have also made screens of EasyTune both in 8x500 and 9x445 configs so you can compare. I tried also in 7x550 but windows wouldnt boot. 7X550 is very unstable, when stress testing in windows on this config, immediately there was a BSOD. Now when windows loads there is a BSOD, but luckily i made a Memset and CPUz screenshot before this.

    Method of testing stability is using the intel burn in test, Linpack x64 using 100% memory and error detection.5x Passes, but will of course try more once 100% sure each config is stable. With 1.4v and 1.38 vtt, my core gets at hottest 75'c averaging 72'c. Not sure if this is a problem, but I have re-seated my Xigmatek Achilles S1284C (Sucessor of S1283) using my MX2 Paste. The sink is deffinately mounted properly, but still using the pushpin system. - would you say these temps are normal? I think they are quite high...

    Start with the possitive: Im happy with the memory timings here and that its stable, but i want to work now on decreasing advance memory timings and voltages, if you could help me with this, it would be great .



    Here are my settings at the moment:

    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 9]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 4.00GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 445Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 700mV
    PCI Express Clock Drive................: 700mV
    CPU Clock Skew (ps)....................: 50ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.00D ---> 2.00B not stable
    Memory Frequency (Mhz) ................: 890
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 4
    tRP'...................................: 4
    tRAS...................................: 11

    Advanced Timing Control
    tRRD...................................: [Auto]
    tWTR...................................: [Auto]
    tWR....................................: [Auto]
    tRFC...................................: [Auto]
    tRTP...................................: [Auto]
    Command Rate (CMD) ....................: [Auto]

    Driving Strength Profiles
    Driving Strength ......................: 800

    Channel A
    Static tRead Value.....................: [12]
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.4000V
    CPU Termination.........1.200V.........: 1.380V
    CPU PLL.................1.500V.........: [Auto]
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.340V
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.570V
    ICH Core................1.100V.........: 1.200V

    DRAM
    DRAM Voltage............1.800V.........: 2.300V (Mem is reccomended between 2.2 and 2.3. 2.28 in Health Status.
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............: [Disabled]

    --------------------------------------------------------------

    Now this is the 500x8 config, something I had no problem doing on my EX38. This board however finds it hard to post and when stress testing on the below settings, it only failed 1 out of 5 tests, so it seems i need some final tweaking to get stability here:



    Here are my settings at the moment:

    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 8]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 4.00GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 500Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 700mV
    PCI Express Clock Drive................: 700mV
    CPU Clock Skew (ps)....................: 50ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.00D ---> 2.00B not stable
    Memory Frequency (Mhz) ................: 1000
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15

    Advanced Timing Control
    tRRD...................................: [Auto]
    tWTR...................................: [Auto]
    tWR....................................: [Auto]
    tRFC...................................: [Auto]
    tRTP...................................: [Auto]
    Command Rate (CMD) ....................: [Auto]

    Driving Strength Profiles
    Driving Strength ......................: [1066] Tried Auto

    Channel A
    Static tRead Value.....................: [12] Tried 13 and Auto
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.4000V
    CPU Termination.........1.200V.........: [1.380] Tried also 1.360 and Auto
    CPU PLL.................1.500V.........: [Auto] Tried Also 1.670
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.340V Tried 1.360
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.570V
    ICH Core................1.100V.........: 1.200V

    DRAM
    DRAM Voltage............1.800V.........: 2.300V (Mem is reccomended between 2.2 and 2.3. 2.28 in Health Status.
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............: [Disabled]
    Last edited by Dodgexander; 03-23-2009 at 09:01 PM.
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

  7. #7

    Default Re: 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066

    (Extra Post Due to Text limit)

    This config is the most unstable of the lot, sometimes can post,sometimes not. Luckily, as stated above i managed to get in to take a screenshot of memory settings. I think im doing something wrong here...



    Here are my settings at the moment:

    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 7]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 3.85GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 550Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 700mV
    PCI Express Clock Drive................: 700mV
    CPU Clock Skew (ps)....................: 50ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.00D ---> 2.00B not stable
    Memory Frequency (Mhz) ................: 1100
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15

    Advanced Timing Control
    tRRD...................................: [Auto]
    tWTR...................................: [Auto]
    tWR....................................: [Auto]
    tRFC...................................: [Auto]
    tRTP...................................: [Auto]
    Command Rate (CMD) ....................: [Auto]

    Driving Strength Profiles
    Driving Strength ......................: [1066] or OC1200 or Auto

    Channel A
    Static tRead Value.....................: [12] Tried 13 and Auto
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.4000V
    CPU Termination.........1.200V.........: [1.380] Tried 1.360 and Auto
    CPU PLL.................1.500V.........: [Auto] Tried 1.670
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.340V Tried 1.360
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.570V
    ICH Core................1.100V.........: 1.200V

    DRAM
    DRAM Voltage............1.800V.........: 2.300V (Mem is reccomended between 2.2 and 2.3. 2.28 in Health Status.
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............: [Disabled]


    --------------------------------------------------

    As advised, In both occations I tried adding more and less vtt, more PLL and I have tested with 12, sometimes 13 static tRead with no avail. The settings that seem to have the largest affect are MCH core which I cant seem to lower any more and driving strength. If i set driving strength from Auto, the board seems to post less often. This is apart from when its set to 800mhz for the 445x9 config.

    Once again thanks Lsdmeasap your support here is terrific. Thanks also to kick, as your link helped me to at least get the settings to where I am now.

    Suggestions for each 3 configs welcome :)
    Last edited by Dodgexander; 03-23-2009 at 09:00 PM.
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

  8. #8

    Default Re: 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066

    Hopefull bump?
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

  9. #9

    Default Re: 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066

    Ok, there is definitley something wrong with another component in my pc, maybe the power inputting the PC. This seems to actually be showing now alot more compared to before (maybe because now I have a GTX 280 compared to a ATI 3850?).

    My pc last night when i turned it on was in a constant reboot state, reboot, shutdown, reboot shutdown etc. I had the 445x9 profile saved at this time.

    So I then, switched the PSU off, unplugged the AC power cord and pressed the computer on/off switch to get rid of any traces of current. Plugged AC Cord back in, turned on PSU and switched on. I managed to get in to the Bios to revert to my default profile (everything stock). Then i hit F10 to save and restart and the computer started doing exactly the same thing again at stock, starting, powering off, starting etc.

    I repeated the above steps and this time didnt go in to bios, the pc seems to be working fine now.

    Im wondering here, because the fact I had my pc turned off for a long time may have something to do with repeating this problem (even with my old board).

    What at could be the cause of this considering it seems to happen still despite me replacing the following components and also seems to happen when my pc is left on or off for a long period of time.

    ATI 3850>GTX 280
    EX38-DQ6> EP45-UD3R
    WD7500AAKS as primary partition > WD Velociraptor
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

  10. #10

    Default Re: 4ghz, UD3R and Team Xtreeme Dark 2x2GB DDR1066

    Do i need a new PSU?
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

Page 1 of 7 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •