Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: x48-T-DQ6 8GB RAM 1333




  1. #1
    Join Date
    Mar 2009
    Posts
    1

    Default x48-T-DQ6 8GB RAM 1333

    Compis Hi I have a problem, if I can have take a hand and I've read a lot in your forums but I did not error
    Motherboard Gigabyte X48T-DQ6
    Memory Kingston 4 x 2 gb 1333
    Processor Q9650 X 8.5
    Taking overclock with only two modules (4 gb) is stable at 3.4 without touching anything else, the lactations are 6-6-6-12, however if two large modules (8gb) do not overclock it gets its roots, work under Windows Vista 64 bits.

    Thank you for your contributions and greetings

    Gráficos robusto Booster_ [Auto]
    CPU Clock Ratio ____________ [8]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [400]
    PCI Express Frequency (Mhz)_______ [100]
    CIA 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [Auto
    DRAM Timing Selectable_______ SPD __ [Manual
    Calendario de DRAM Selectable DOCUP [Manual]
    Performance Enhance = [Standard] Mejorar el rendimiento = [Estándar]

    *********Standard Timing Control*********** ********* Calendario Estándar de Control ***********
    xCAS Latency Time - 6
    xDRAM RAS# tPrecharge - 6
    xDRAM RAS # tPrecharge - 6
    xPrecharge Delay (tRAS) - 24
    ********Advanced Timing Control********* ******** ********* Avanzada Calendario de control
    ACTO Xact a Plazo (tRRD) - 4
    5 Escriba a xRank Leer Retraso - 5
    xWrite de precarga de retardo - 10
    ACTO xRefresh a Plazo - 74
    xRead de precarga de retardo - 5
    Valor xStatic de rodadura - 7
    Fase de Ajuste xStatic de rodadura - AUTO
    xCommand Rate (CMD) – T1

    ********System Voltage Optimized******** Tensión del sistema optimizado ******** ********
    Sistema de control de tensión - MANUAL
    Control de sobretensión DDR3 - NORMAL
    PCI-E Sobrevoltaje Control - NORMAL
    FSB Sobrevoltaje Control - NORMAL
    (G)MCH Overvoltage Control - NORMAL
    maternoinfantil Sobrevoltaje - NORMAL
    Loadline Calibration - AUTO Calibración de carga - AUTO
    CPU Voltage Control - 1.4000... CPU Voltage Control - 1,4500 ...


    Last edited by jug; 03-18-2009 at 05:30 PM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: x48-T-DQ6 8GB RAM 1333

    Try this >>>

    If you need more help, please post in all english so I can know for sure what you have wrote for BIOS settings names. If they are in the correct normal places within your above settings then this below would be my advise

    Also, please give me a link to your ram or the Model #

    ACTO xRefresh a Plazo - 74 << Try 88 -92 for now

    Valor xStatic de rodadura - 7 << Try 10 for now

    xCommand Rate (CMD) – T1 << Set to 2 manually

    ********System Voltage Optimized******** Tensión del sistema optimizado ******** ********
    Sistema de control de tensión - MANUAL
    Control de sobretensión DDR3 - NORMAL << Set to what your ram sticker says it needs, normally this would be 1.6-1.9V (Default/Auto is 1.5V) If your ram is 1.5V rated, then I woudl still use at least 1.6V

    PCI-E Sobrevoltaje Control - NORMAL << +0.1V
    FSB Sobrevoltaje Control - NORMAL << +0.1V
    (G)MCH Overvoltage Control - NORMAL << +0.1V-0.35V

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •