Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: 4 ghz configeration




  1. #11
    Join Date
    Oct 2008
    Posts
    13

    Default Re: 4 ghz configeration

    my current settings:
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 9]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 3.60GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 401Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.66D
    Memory Frequency (Mhz) ................: 1069
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 7
    tRCD ..................................: 7
    tRP'...................................: 7
    tRAS...................................: 20

    Advanced Timing Control
    tRRD...................................: 4
    tWTR...................................: 4
    tWR....................................: 6
    tRFC...................................: 54
    tRTP...................................: 4
    Command Rate (CMD) ....................: 2

    Driving Strength Profiles
    Driving Strength ......................: 1066

    Channel A
    Static tRead Value.....................: 7
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Channel B
    Static tRead Value.....................: 7
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.40000V
    CPU Termination.........1.200V.........: 1.200V
    CPU PLL.................1.500V.........: 1.500V
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.200V
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V
    ICH Core................1.100V.........: 1.100V

    DRAM
    DRAM Voltage............1.800V.........: 2.080V
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............: [Disabled]
    .................................................. ....................................
    plz Lsdmeasap
    I want to see 4.0 GHZ oc with my eyes
    Last edited by alaaelbadr; 04-10-2009 at 03:01 PM.

  2. #12
    Join Date
    Oct 2008
    Posts
    13

    Default Re: 4 ghz configeration

    answer plesse

  3. #13
    Join Date
    Oct 2008
    Posts
    13

    Default Re: 4 ghz configeration

    no answer

  4. #14
    Join Date
    Oct 2008
    Posts
    13

    Default Re: 4 ghz configeration

    y no 1 answer me

  5. #15

    Default Re: 4 ghz configeration

    alaaelbadr. LSDMeasap doesnt work for gigabyte, so hes not here to help you with your overclock. He is only another forum member/mod (all be it a very good one) who helps out.

    If I were LSDMeasap, I wouldnt apreciate keep asking and bumping your thread for help! It could also be the case that each time he misses your thread also.

    Its also very important for you to state what you have tried exactly!

    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 9]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 3.60GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 445Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps (You can try Raising this if all else fails, try 50,100 and 150ps to see if you find any difference)
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ................: 900
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 7
    tRCD ..................................: 7
    tRP'...................................: 7
    tRAS...................................: 20

    Advanced Timing Control
    tRRD...................................: 4
    tWTR...................................: 4
    tWR....................................: 6
    tRFC...................................: 54
    tRTP...................................: 4
    Command Rate (CMD) ....................: 2

    Driving Strength Profiles
    Driving Strength ......................: 1066 (Test 800 and 1066)

    Channel A
    Static tRead Value.....................: 7 (Try 12)
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Channel B
    Static tRead Value.....................: 7(Try 12)
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.40000V (This heavily depends on how capable your E8400 is. What stepping is your E8400? E0 or C0? CPUZ will tell you)
    CPU Termination.........1.200V.........: 1.200V (This needs to be raised to be almost as much as your vcore. Try 1.3-1.36)
    CPU PLL.................1.500V.........: 1.500V (Raise one or two notches)
    CPU Reference...........0.760V.........: [Auto] (If all else fails, change this manually to get 0.740-0.800 but you shouldnt need this, you would need to test this. ONLY change if all else fails)

    MCH/ICH
    MCH Core................1.100V.........: 1.200V
    MCH Reference...........0.760V.........: [Auto] (If all else fails, change this manually to get 0.740-0.800 but you shouldnt need this, you would need to test this. ONLY change if all else fails)

    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V (Raise one notch)
    ICH Core................1.100V.........: 1.100V(Raise one notch)

    DRAM
    DRAM Voltage............1.800V.........: 2.080V (Is this the max reccomended voltage for your ram? Set it according to spec of your ram)
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............: [Disabled]
    Last edited by Dodgexander; 04-15-2009 at 12:16 AM.
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

  6. #16
    Join Date
    Oct 2008
    Posts
    13

    Default Re: 4 ghz configeration

    thank u Dodgexander
    i'll try this

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: 4 ghz configeration

    Sorry I missed your post!! Yes, each time you bump your post it goes to the back of my replies because I try to start at the back end of new posts each night and work my way to page one

    Above suggestions are good for sure. Here is what I would have suggested for you for 4Ghz with ram at 900. If you do run into issues please post the exact settings you try that fail and let us know how they are failing for you >>>

    my current settings:
    Robust Graphics Booster ...............: [Auto or Fast]
    CPU Clock Ratio .......................: [ 9]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 4.05GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 450Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.00D or 2.00B (Try B later)
    Memory Frequency (Mhz) ................: 900
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 7
    tRCD ..................................: 7
    tRP'...................................: 7
    tRAS...................................: 20

    ^^ With 900Mhz ram and 2.05-2.1 actual ram voltage you may be able to use 555-12/15 main timings, but try later on ^^

    Advanced Timing Control
    tRRD...................................: 3-4
    tWTR...................................:3-6
    tWR....................................: 4-8
    tRFC...................................: 52-62
    tRTP...................................: 3-5
    Command Rate (CMD) ....................: 2

    Driving Strength Profiles
    Driving Strength ......................: 1066

    Channel A
    Static tRead Value.....................: Set to 9/10 for now
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Channel B
    Static tRead Value.....................: Set to 9/10 for now
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.40000V << This should be good for 4Ghz, is this about 1.34-1.36 actual in CPU-z? You may need more or less for 3.6 or 4Ghz, 1.28-1.45

    CPU Termination.........1.200V.........: 1.200V << More for sure (Even for 3.6 as you had posted) for 3.6 I would use 1.25-1.3. For 4Ghz you may need 1.28-1.34

    CPU PLL.................1.500V.........: 1.500V << 1.5-1.58
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.200V << Set 1.20-1.3 (Often 1.20-1.24 is fine)
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V << Set 1.55
    ICH Core................1.100V.........: 1.100V << Set 1.14-1.2

    DRAM
    DRAM Voltage............1.800V.........: 2.080V (2.05 is your ram's rating so you may need that in full, or a little more even and what you set can be less then what you get so be sure to check in PC Health section to see what you are getting for what you set. I would say 2.0-2.12 should be good. 2.12 for example may only give you 2.08, that's what I mean by saying you need to check to be sure

    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

  8. #18
    Join Date
    Oct 2008
    Posts
    13

    Default Re: 4 ghz configeration

    first of aii thank u Lsdmeasap

    IT DID NOT WORK AT ALL ANY CHANGES TO GET 4.0 GH
    NEED TO KNOW Y ?

  9. #19
    Join Date
    Oct 2008
    Posts
    13

    Default Re: 4 ghz configeration

    Up
    up
    up

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •