Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Ud3r BIOS




  1. #11
    Join Date
    Jan 2009
    Location
    Virginia, USA
    Posts
    115

    Default Re: Ud3r BIOS

    The timings will work fine for your memory and so will everything else. You will need to change the DRAM voltage though. My settings show DRAM at 2.00V. Your RAM is made to run 2.10V, so you will need to make that change.
    Gigabyte EP45-UD3R (F7 BIOS)
    Intel Pentium E8400 E0
    Arctic Cooling Freezer 7 Pro
    G.Skill DDR2 1066 (2x2GB) 5-5-5-15 @ 2.0V~2.1V
    EVGA GeForce 9800 GT 512MB
    (3x) Seagate Barracuda 250GB SATA II Drives
    CORSAIR 650TX 650W PSU
    Cooler Master Centurion 5 Case
    XP Professional 32-bit SP3

    Stable E8400 OC - stock voltages
    Stable E8400 OC - 3.83

  2. #12
    Join Date
    Mar 2009
    Posts
    14

    Default Re: Ud3r BIOS

    right i hav set everything like it is there but 2 things

    My CPU Vcore is 1.225 not 1.25

    And i dont seem too be able to change

    Motherboard Voltage Control
    Voltage Type

    it does not let me select it at all will that be a problem?

  3. #13
    Join Date
    Jan 2009
    Location
    Virginia, USA
    Posts
    115

    Default Re: Ud3r BIOS

    Remember to activate manual voltages with the settings in bold below:

    Code:
     
    Motherboard Voltage Control
    Voltage Type...........................: [Manual] 
     
    CPU---------------------Normal-----------Current
     
    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.25000V
    CPU Termination.........1.200V.........: 1.200V
    CPU PLL.................1.500V.........: 1.500V
    CPU Reference...........0.760V.........: [Auto]  
     
    MCH/ICH
    MCH Core................1.100V.........: 1.200V
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V
    ICH Core................1.100V.........: 1.100V
     
    DRAM
    DRAM Voltage............1.800V.........: 2.100V 
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]
    Gigabyte EP45-UD3R (F7 BIOS)
    Intel Pentium E8400 E0
    Arctic Cooling Freezer 7 Pro
    G.Skill DDR2 1066 (2x2GB) 5-5-5-15 @ 2.0V~2.1V
    EVGA GeForce 9800 GT 512MB
    (3x) Seagate Barracuda 250GB SATA II Drives
    CORSAIR 650TX 650W PSU
    Cooler Master Centurion 5 Case
    XP Professional 32-bit SP3

    Stable E8400 OC - stock voltages
    Stable E8400 OC - 3.83

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ud3r BIOS

    Please give me the model # of your memory if you do not know how to link it. What I meant by link it was go to the page you bought it from and just copy/paste the url to that page here

    Those settings may or may not work with the ram you use, it depends on your FSB you are running, if it is stock FSB of 333 then no that would only put your ram speed at 885Mhz. It would work yes, but not correctly. You would want to use 3.20B if you are running 333 FSB

    And of course some of those could be lower once you get going as well

  5. #15
    Join Date
    Mar 2009
    Posts
    14

    Default Re: Ud3r BIOS

    I cant not seem too have the option to do this


    Motherboard Voltage Control
    Voltage Type...........................: [Manual]</pre>
    But every thing else is done. Could it hav some thing too do with the fact i have not updated my Bios?

    Here is the like for my RAM
    Corsair Dominator 2GB (2x1GB) DDR2 PC2-8500C5 1066MHz Dual Channel Kit : novatech.co.uk : CSR-XP852

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ud3r BIOS

    Ahh, no sorry that is just in my template from a older BIOS that you had to enable that setting to change voltages under it. You can now change them without setting that to manual, I will change that in my template

    Here is settings for your setup with no overclock in mind, do keep in mind you will need to change some things first if you plan to overclock. So if you do let us know and we can tell you what you need to change before you start >>>

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3Ghz
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 3.20B
    Memory Frequency (Mhz) ..............: 1066
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15/18
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-6
    tWR............................................4-6
    tRFC...........................................52-62
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................1066
    
    Channel A
    Static tRead Value.........................:6/7-10
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
    
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
    
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << Auto is fine for 2x1GB with no overclock
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< 1.55
    ICH Core…………...……1.100V............: <<< 1.14-1.2
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.1
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled] << Can be enabled if you do not want to overclock (CPU will drop in speed (Multi and voltages) when idle
    
    C2/C2E State Support....................: [Disabled] Enabled if you like
    x C4/C4E State Support..................: [Disabled] Enabled if you like
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled] << Can be enabled if you do not want to overclock (CPU will drop in speed (Multi and voltages) when idle
    
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  7. #17
    Join Date
    Mar 2009
    Posts
    14

    Default Re: Ud3r BIOS

    well thx for the help guys

    i hav gone with the link for Outer Marker's 3.6 stock and it seems to be ok so far think it actually help make my com run smoother. dont mind a little bit of overclock i suppose if this is what u get for it.

    but if there are suppose to be different bios setting for my RAM than in that link let me know ok

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ud3r BIOS

    Well that sounds good, if you have issues or think things could be better let us know your settings and or issues and we will try to help

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •