Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 16 FirstFirst ... 45678 ... LastLast
Results 51 to 60 of 159

Thread: New Member




  1. #51

    Default Re: New Member

    Quote Originally Posted by High Sierra View Post
    Damn, it happened again. I rebooted to change some memory timings, but during the reboot the bios powered of and on and reset the stock cpu settings.

    This time I just adjusted the memory timings at stock cpu settings and rebooted into windows, then reloaded the 3.789ghz settings with adjusted memory settings (stock memory settings of 55515. It booted.

    If this happens again should I adjust the CPU voltage. It's at 1.30. I could increase to 1.35 and test at that setting.

    It's too bad the BIOS wouldn't say what setting it didn't like.

    There must be some issue we are missing. Could it be PS. I have a 470W Thermaltake. That should be plenty.
    Cool.

    And here are the safe Voltages: (According to Intel)

    Red=NO, Green=OK, Black=Too Low

    <style> <!-- BODY,DIV,TABLE,THEAD,TBODY,TFOOT,TR,TH,TD,P { font-family:"Arial"; font-size:x-small } --> &nb</style>
    <table border="0" cellspacing="0" cols="1" rules="none" frame="void"> <colgroup><col width="91"></colgroup> <tbody> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#ff0000" width="91" height="17">1.40000V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#ff0000" height="17">1.39375V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#ff0000" height="17">1.38750V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#ff0000" height="17">1.38125V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#ff0000" height="17">1.37500V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#ff0000" height="17">1.36875V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.36250V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.35625V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.35000V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.34375V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.33750V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.33125V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.32500V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.31875V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.31250V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.30625V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.30000V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.29375V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.28750V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.28125V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.27500V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.26875V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.26250V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.25625V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.25000V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.24375V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.23750V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.23125V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#3deb3d" height="17">1.22500V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.21875V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.21250V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.20625V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.20000V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.19375V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.18750V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.18125V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.17500V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.16875V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.16250V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.15625V</td> </tr> <tr> <td sdnum="1033;0;#,##0.00" align="center" bgcolor="#000000" height="17">1.15000V</td></tr></tbody></table>
    We'd have to post a pole, if we can here, or ask "LsdMeAsap" what is considered safe for the Wolfdale E8400 according to the members of this Forum. Off the top of my head, I think many here with E8400's experience consider 1.4V "tops" they would go on Air but i don't really know.

    If higher than Intel says allows me to achieve the ultimate goal on air of 4.1GHz I will go for it.

    I was more interested in not voiding my warrenty a year ago when I first researched max CPU voltage.

    "1.35625V" @ 4.005MHz is the highest I ever tried a year ago... back when I was trying to find all the minimums. (It passed Super-Pie and 3DMark'05.)

    GL
    Last edited by Bee_Dee_3_Dee; 04-02-2009 at 12:12 AM.
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  2. #52

    Default Re: New Member

    Note to previous post:

    I fixed my old 939 system finally yesterday and I'm ready to OC this Box back over 3.7GHz finally! w00t!!!

    It's been six months I think. I've been getting by with an ASUS Netbook for a secondary box.
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  3. #53
    Join Date
    Mar 2009
    Location
    Atlantic Canada
    Posts
    103

    Default Re: New Member

    I set voltage to 1.3500V for the cpu and ran prime95 for 3-0 minutes. It ran OK, but temps increased by 5 degrees to a max of 63 deg C. Idle temps are about the same 44 deg C. I'm going to try to use the next step above 1.300V to see if that is stable, since this just seems to be a post issue. Once posted, 1.300v was stable.
    ASUS P8P67 Pro B3
    I5 2500K @ 4.5Ghz,
    G. Skill Ripjaws X F3-10666CL7D-4GBXH 2x2GB DDR3 1333,
    Coolit ECO A.L.C,
    MSI Twin Frozr AMD HD 6950,
    SoundBlaster XFI Extreme Gamer,
    Seagate ST2000DX001 SSHD 2TB
    Seagate Barracuda 7200.10 500GB SATA2 HD,
    Western Digital WDC WD1001FALS-00Y6A0 1 TB SATA2 HD,
    Corsair TX750W PS,
    Samsung SH-S223 DVDRW SATA,
    CoolerMaster HAF 922 Case,
    Corsair Vengeance K70 Cherry Brown Switches,
    Logitech G5 Mouse,
    Sennheiser PC141 Neckband Headset,
    D-Link Dir-655,
    LG Flatron L222WT Monitor,
    Windows 7 Home Premium (64 bit)

    Remember it's just a game.

    Loyalty above all, except Honor.

  4. #54

    Default Re: New Member

    Quote Originally Posted by High Sierra View Post
    I set voltage to 1.3500V for the cpu and ran prime95 for 3-0 minutes. It ran OK, but temps increased by 5 degrees to a max of 63 deg C. Idle temps are about the same 44 deg C. I'm going to try to use the next step above 1.300V to see if that is stable, since this just seems to be a post issue. Once posted, 1.300v was stable.
    That's about 7 more than I've ever experienced. And much too close to Max temps. :(

    My HSF is only the "Arctic Cooling Freezer 7 Pro".

    Have you confirmed temps in two or more utilities?
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  5. #55
    Join Date
    Mar 2009
    Location
    Atlantic Canada
    Posts
    103

    Default Re: New Member

    Yes I check Real Temp, Core temp and SIW.

    Question? Do you know what sensors TMPIN0 and TMPIN2 are?

    BTW when I went to reboot to change voltage to just over 1.300V it powered of then on, and never showed the splash screen. In windows it was still 3.789ghz, so I rebooted to change the voltage and it failed to post. Had 3 beeps error. I have to look that up. So I turned off the PS for a few seconds then booted and it was back to stock. I hope those are the actual steps.

    I'm going to reload the optimized defaults again.
    ASUS P8P67 Pro B3
    I5 2500K @ 4.5Ghz,
    G. Skill Ripjaws X F3-10666CL7D-4GBXH 2x2GB DDR3 1333,
    Coolit ECO A.L.C,
    MSI Twin Frozr AMD HD 6950,
    SoundBlaster XFI Extreme Gamer,
    Seagate ST2000DX001 SSHD 2TB
    Seagate Barracuda 7200.10 500GB SATA2 HD,
    Western Digital WDC WD1001FALS-00Y6A0 1 TB SATA2 HD,
    Corsair TX750W PS,
    Samsung SH-S223 DVDRW SATA,
    CoolerMaster HAF 922 Case,
    Corsair Vengeance K70 Cherry Brown Switches,
    Logitech G5 Mouse,
    Sennheiser PC141 Neckband Headset,
    D-Link Dir-655,
    LG Flatron L222WT Monitor,
    Windows 7 Home Premium (64 bit)

    Remember it's just a game.

    Loyalty above all, except Honor.

  6. #56
    Join Date
    Mar 2009
    Location
    Atlantic Canada
    Posts
    103

    Default Re: New Member

    OK, I reloaded the Optimized defaults and made my normal adjustments, including my memory timings. I hope stock is stable. I'm going to keep it this way for awhile.

    BTW could this be a bios issue. Should I upgrade my bios?
    Last edited by High Sierra; 04-02-2009 at 01:50 AM. Reason: added last line
    ASUS P8P67 Pro B3
    I5 2500K @ 4.5Ghz,
    G. Skill Ripjaws X F3-10666CL7D-4GBXH 2x2GB DDR3 1333,
    Coolit ECO A.L.C,
    MSI Twin Frozr AMD HD 6950,
    SoundBlaster XFI Extreme Gamer,
    Seagate ST2000DX001 SSHD 2TB
    Seagate Barracuda 7200.10 500GB SATA2 HD,
    Western Digital WDC WD1001FALS-00Y6A0 1 TB SATA2 HD,
    Corsair TX750W PS,
    Samsung SH-S223 DVDRW SATA,
    CoolerMaster HAF 922 Case,
    Corsair Vengeance K70 Cherry Brown Switches,
    Logitech G5 Mouse,
    Sennheiser PC141 Neckband Headset,
    D-Link Dir-655,
    LG Flatron L222WT Monitor,
    Windows 7 Home Premium (64 bit)

    Remember it's just a game.

    Loyalty above all, except Honor.

  7. #57

    Default Re: New Member

    Quote Originally Posted by High Sierra View Post
    Yes I check Real Temp, Core temp and SIW.

    Question? Do you know what sensors TMPIN0 and TMPIN2 are?

    BTW when I went to reboot to change voltage to just over 1.300V it powered of then on, and never showed the splash screen. In windows it was still 3.789ghz, so I rebooted to change the voltage and it failed to post. Had 3 beeps error. I have to look that up. So I turned off the PS for a few seconds then booted and it was back to stock. I hope those are the actual steps.

    I'm going to reload the optimized defaults again.
    hmmm...

    Here what it says on Page 75 (Chapter 5) in the Manual's FAQ's:

    Q: What do the beeps emitted during the POST mean?
    A: The following Award BIOS beep code descriptions may help you identify possible computer problems.
    (For reference only.)
    1 short: System boots successfully
    2 short: CMOS setting error
    1 long, 1 short: Memory or motherboard error
    1 long, 2 short: Monitor or graphics card error
    1 long, 3 short: Keyboard error
    1 long, 9 short: BIOS ROM error
    Continuous long beeps: Graphics card not inserted properly
    Continuous short beeps: Power error

    Sooooo.......

    Keyboard error..... (?)

    It would be too sweet if that made a super difference...

    Try several KBs.
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  8. #58
    Join Date
    Mar 2009
    Location
    Atlantic Canada
    Posts
    103

    Default Re: New Member

    It was 3 beeps not 1 long 3 short.

    I had already checked the manual.
    ASUS P8P67 Pro B3
    I5 2500K @ 4.5Ghz,
    G. Skill Ripjaws X F3-10666CL7D-4GBXH 2x2GB DDR3 1333,
    Coolit ECO A.L.C,
    MSI Twin Frozr AMD HD 6950,
    SoundBlaster XFI Extreme Gamer,
    Seagate ST2000DX001 SSHD 2TB
    Seagate Barracuda 7200.10 500GB SATA2 HD,
    Western Digital WDC WD1001FALS-00Y6A0 1 TB SATA2 HD,
    Corsair TX750W PS,
    Samsung SH-S223 DVDRW SATA,
    CoolerMaster HAF 922 Case,
    Corsair Vengeance K70 Cherry Brown Switches,
    Logitech G5 Mouse,
    Sennheiser PC141 Neckband Headset,
    D-Link Dir-655,
    LG Flatron L222WT Monitor,
    Windows 7 Home Premium (64 bit)

    Remember it's just a game.

    Loyalty above all, except Honor.

  9. #59

    Default Re: New Member

    Quote Originally Posted by High Sierra View Post
    OK, I reloaded the Optimized defaults and made my normal adjustments, including my memory timings. I hope stock is stable. I'm going to keep it this way for awhile.

    BTW could this be a bios issue. Should I upgrade my bios?
    See my preveous post and I have the same BIOS... and added it to my sig if u need to check again. :)
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  10. #60
    Join Date
    Mar 2009
    Location
    Atlantic Canada
    Posts
    103

    Default Re: New Member

    OK, thanks. BTW it's a usb keyboard.

    Is your processor C0 or E0?
    ASUS P8P67 Pro B3
    I5 2500K @ 4.5Ghz,
    G. Skill Ripjaws X F3-10666CL7D-4GBXH 2x2GB DDR3 1333,
    Coolit ECO A.L.C,
    MSI Twin Frozr AMD HD 6950,
    SoundBlaster XFI Extreme Gamer,
    Seagate ST2000DX001 SSHD 2TB
    Seagate Barracuda 7200.10 500GB SATA2 HD,
    Western Digital WDC WD1001FALS-00Y6A0 1 TB SATA2 HD,
    Corsair TX750W PS,
    Samsung SH-S223 DVDRW SATA,
    CoolerMaster HAF 922 Case,
    Corsair Vengeance K70 Cherry Brown Switches,
    Logitech G5 Mouse,
    Sennheiser PC141 Neckband Headset,
    D-Link Dir-655,
    LG Flatron L222WT Monitor,
    Windows 7 Home Premium (64 bit)

    Remember it's just a game.

    Loyalty above all, except Honor.

Page 6 of 16 FirstFirst ... 45678 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •