Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 9 of 16 FirstFirst ... 7891011 ... LastLast
Results 81 to 90 of 159

Thread: New Member




  1. #81

    Default Re: New Member

    Quote Originally Posted by High Sierra View Post
    OK, before I do this, would you tell me if the DDR overvoltage setting of +0.300V is pink in your BIOS. It is in mine and once selected I can't change it.

    Also did you try +0.300V in your tests of 3.789ghz?
    Yes to the second question and the first question's answer is be sure adjusting voltages is enabled.

    Edit:

    The picture I took today does show it in pink. Be sure "System Voltage Control" is set to Manual.
    Last edited by Bee_Dee_3_Dee; 04-07-2009 at 08:30 AM.
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  2. #82
    Join Date
    Mar 2009
    Location
    Atlantic Canada
    Posts
    103

    Default Re: New Member

    OK, I tried it with no luck. Not sure what the problem is, but the DDR voltage setting of +0.03 makes ddr voltage more than the memory is speced for. And you can't change it to anything else. When you select 0.03 that selection is no longer available to change. Even after the bios reverted to 3ghz the voltage settings were still manual.

    Too bad the bios won't say what it doesn't like.
    ASUS P8P67 Pro B3
    I5 2500K @ 4.5Ghz,
    G. Skill Ripjaws X F3-10666CL7D-4GBXH 2x2GB DDR3 1333,
    Coolit ECO A.L.C,
    MSI Twin Frozr AMD HD 6950,
    SoundBlaster XFI Extreme Gamer,
    Seagate ST2000DX001 SSHD 2TB
    Seagate Barracuda 7200.10 500GB SATA2 HD,
    Western Digital WDC WD1001FALS-00Y6A0 1 TB SATA2 HD,
    Corsair TX750W PS,
    Samsung SH-S223 DVDRW SATA,
    CoolerMaster HAF 922 Case,
    Corsair Vengeance K70 Cherry Brown Switches,
    Logitech G5 Mouse,
    Sennheiser PC141 Neckband Headset,
    D-Link Dir-655,
    LG Flatron L222WT Monitor,
    Windows 7 Home Premium (64 bit)

    Remember it's just a game.

    Loyalty above all, except Honor.

  3. #83

    Default Re: New Member

    Quote Originally Posted by High Sierra View Post
    OK, I tried it with no luck. Not sure what the problem is, but the DDR voltage setting of +0.03 makes ddr voltage more than the memory is speced for. And you can't change it to anything else. When you select 0.03 that selection is no longer available to change. Even after the bios reverted to 3ghz the voltage settings were still manual.

    Too bad the bios won't say what it doesn't like.
    Do you have "HWMonitor"? (CPUID)

    When I set my RAM to +0.3 like my manufactures telephone tech said to do- because it is suppose to run at 2.1 volts and this mobo is default 1.8v- the result i get in "HWMonitor" is "2.11 V" (Under Voltages VIN1). I'm almost positive that when I set my RAM to default voltage (Normal) it reads between 1.87v and 1.92V in HWMonitor.

    So what do you get for VIN1 in CPUID "Hardware Monitor".

    Also, have you read the reviews for your RAM at NewEgg?

    Start at the oldest and set it at 100 per page and use word search to find stuff.

    Customer Reviews Of mushkin XP ASCENT w/ eVCI technology 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory - Retail

    Another thing is the "EVEREST" program is also a good one for voltages. (Everest Ultimate Edition 5.01.1700) When you look at computer/Sensor/Voltage Values/DIMM, you get the exact same voltage reading as in HWMonitor. They both read 2.11V for my RAM at +0.30v.

    And in "Everest's" Tools/System Stability Test/Statistics Tab is like HWMonitor and keeps record of Max Min and also Average too.

    Maybe calling manufacturer is the wisest thing too.

    GL keep me posted!
    Last edited by Bee_Dee_3_Dee; 04-07-2009 at 09:37 AM.
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  4. #84

    Default Re: New Member

    High Sierra,

    See previous post too, but read the following:

    I have an idea that we have left out one step! Maybe a year ago I was doing it, but not recently. Something as simple saving to a profile every time.

    And ain't that how it always seems to turn out anyway? Something so simple. One little step. lol

    Another way of putting it is, not relying on hitting "F10" before exiting BIOS as the "tried and true" way of saving changes. Only using "F10" is fine if your not OCing and or just making boot order changes.

    In other words, we have to:
    1. Make changes or Load a Profile.
    2. "Save it" ("F11" and select a profile to save it to. Evey time changes are made. Even save it to a profile slot that you just loaded is probably correct or fine.)
    3. "Apply it" ("F10", "Y", and exit.)
    4. Then Boot right back into BIOS to see if BIOS remembered the settings.
    5. If BIOS remembered changes, then Exit without Saving changes (there's no "F" key so just use arrows to select "Exit without Saving".)
    6. Then Boot into Windows and run your regular tests.

    We'll make sense out of it later. For now I wanted to mention it before testing it idea. (*must play Crysis at 3.9GHz and 4.0GHz!* lol.)

    Here's how I thought of it:

    I went back to my usual "3.7GHz" profile last night. But this morning I loaded the awesome "3.85GHz" one from yesterday and hit "F10" and expected it to work flawlessly. But BIOS reset. I was like "wtf" (Fettuccine) again because it failed. So, I loaded "3.7GHz" one and hit "F10". But again, BIOS reset.

    *Fettuccine*

    I had to use the jumper on my MOBO to clear CMOS. I then loaded "3.85GHz" one and noticed something to save permanently (the "Boot from USB" thing.). So I hit "F11" and applied it to the same "3.85GHz profile. Then hit "F10". Then Exited. Robooted. Went back to BIOS. And BIOS remembered! Then booted into Windows. And I'm running it now. w00t!

    So if I recreate it we know for sure.

    I bet one of the newer BIOS versions for this MOBO automatically applies it to a nameless profile in order to avoid all this confusion. LOL AND, that is why these MOBOs got so inexpensive a year ago. To bad they are sold out.lol

    Wish me luck! c ya
    Last edited by Bee_Dee_3_Dee; 04-07-2009 at 09:31 PM.
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  5. #85
    Join Date
    Mar 2009
    Location
    Atlantic Canada
    Posts
    103

    Default Re: New Member

    Running Stock 3ghz.

    My Vin1 in SIS (System Information for Windows) shows 2.06 in the sensors display. This is what shows on BIOS (2.064).
    BTW I think the sensors display in SIW is the same as HWMonitor. At least it looks exactly the same.

    Everest Ultimate edition shows 2.06 as well.

    I'll go through those reviews to see if I can come up with something. However it's not necessarily the memory that is the problem. I'm going to run memtest86 overnight at the 1066 recommended settings of 55515 to see what happens.


    Actually I've been doing something like that each time. f11 then f10, then boot to bios check settings, then into windows.

    I'm going to try something else. I'm going to load optimized defaults. make necessary changes (boot order etc.), f11, then f10. boot into windows, reboot into bios, make my OC changes, then f11, f10 and see if it will boot into windows.
    Last edited by High Sierra; 04-07-2009 at 09:29 PM.
    ASUS P8P67 Pro B3
    I5 2500K @ 4.5Ghz,
    G. Skill Ripjaws X F3-10666CL7D-4GBXH 2x2GB DDR3 1333,
    Coolit ECO A.L.C,
    MSI Twin Frozr AMD HD 6950,
    SoundBlaster XFI Extreme Gamer,
    Seagate ST2000DX001 SSHD 2TB
    Seagate Barracuda 7200.10 500GB SATA2 HD,
    Western Digital WDC WD1001FALS-00Y6A0 1 TB SATA2 HD,
    Corsair TX750W PS,
    Samsung SH-S223 DVDRW SATA,
    CoolerMaster HAF 922 Case,
    Corsair Vengeance K70 Cherry Brown Switches,
    Logitech G5 Mouse,
    Sennheiser PC141 Neckband Headset,
    D-Link Dir-655,
    LG Flatron L222WT Monitor,
    Windows 7 Home Premium (64 bit)

    Remember it's just a game.

    Loyalty above all, except Honor.

  6. #86

    Default Re: New Member

    High Sierra,

    See my previous two post too, but read the following:

    OK, so far, it's working!

    I can always load my "3.0GHz" Profile, "3.7GHz" Profile, or "3.85GHz" Profile and they will always load and work!

    I did try getting to 3.9GHz but BIOS did not like the settings I tried and reset to default 3.0GHz. And I was able to load my "3.85GHz" Profile, Saved it back on top of itself, booted back to BIOS to double check it, then load Windows no problem! And I'm running my "3.85GHz" Profile now.

    So I'll probably try 3.86GHz, save it to anything- probably a new profile, Exit, boot back to check changes, then boot into Windows and test.

    Wish me luck!
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  7. #87

    Default Re: New Member

    Quote Originally Posted by High Sierra View Post
    Running Stock 3ghz.

    My Vin1 in SIS (System Information for Windows) shows 2.06 in the sensors display. This is what shows on BIOS (2.064).
    BTW I think the sensors display in SIW is the same as HWMonitor. At least it looks exactly the same.

    Everest Ultimate edition shows 2.06 as well.

    I'll go through those reviews to see if I can come up with something. However it's not necessarily the memory that is the problem. I'm going to run memtest86 overnight at the 1066 recommended settings of 55515 to see what happens.
    That is exactely what I was going to recommend. I just didnt know if you had Memtest or knew how to DL ISO or watever and run it. so cool!
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  8. #88

    Default Re: New Member

    Sry fo the tripple post High Sierra, (see my preveous)

    The following work flawlessly!
    -"3.0GHz" Profile
    -"3.7GHz" Profile
    -"3.85GHz" Profile
    -"3.86GHz" Profile

    I can load anyone of them at anytime!

    Just as long as I do the following:

    1. Make changes or Load a Profile.
    2. "Save it" ("F11" and select a profile to save it to. Every time changes are made. Even save it to a profile slot that you just loaded is fine.)
    3. "Apply it" ("F10", "Y", and exit.)
    4. Then Boot right back into BIOS to see if BIOS remembered the settings.
    5. If BIOS remembered changes, then Exit without Saving changes (there's no "F" key so just use arrows to select "Exit without Saving".)
    6. Then Boot into Windows and run your regular tests.
    And now that the "Loading Previously Proven Profiles That BIOS Fails To Remember" Mystery is solved we can focus on your RAM maybe being bad.

    The Memtest overnight will complete the first required step in the protocol. :D

    GL

    Occording to the NewEgg Reviews I'm sure its just fine and will pass with "flying colors".

    BUT DONT FORGET!!!!

    Each RAM Chip needs to be tested individually in MEMTEST !!!
    !
    Last edited by Bee_Dee_3_Dee; 04-07-2009 at 09:44 PM.
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  9. #89
    Join Date
    Mar 2009
    Location
    Atlantic Canada
    Posts
    103

    Default Re: New Member

    I just went in to change my ram to the recommended settings (1066 at 55515) ready for memtest.

    I noticed that if I set ddr voltage to normal (using Manual system voltage control) that it was 2.064V. if I set it to +.2V it was 2.064V. If I set it to +.1v it was 1.9..V.

    The CPU-Z SPD panel says 2.050v under the EPp#1 column. Memset shows 2.050V as well. So I guess the MB must read that EPP info from the memory modules and set voltage as close as it can.

    I'll run memtest tonight.
    ASUS P8P67 Pro B3
    I5 2500K @ 4.5Ghz,
    G. Skill Ripjaws X F3-10666CL7D-4GBXH 2x2GB DDR3 1333,
    Coolit ECO A.L.C,
    MSI Twin Frozr AMD HD 6950,
    SoundBlaster XFI Extreme Gamer,
    Seagate ST2000DX001 SSHD 2TB
    Seagate Barracuda 7200.10 500GB SATA2 HD,
    Western Digital WDC WD1001FALS-00Y6A0 1 TB SATA2 HD,
    Corsair TX750W PS,
    Samsung SH-S223 DVDRW SATA,
    CoolerMaster HAF 922 Case,
    Corsair Vengeance K70 Cherry Brown Switches,
    Logitech G5 Mouse,
    Sennheiser PC141 Neckband Headset,
    D-Link Dir-655,
    LG Flatron L222WT Monitor,
    Windows 7 Home Premium (64 bit)

    Remember it's just a game.

    Loyalty above all, except Honor.

  10. #90

    Default Re: New Member

    Quote Originally Posted by High Sierra View Post
    I just went in to change my ram to the recommended settings (1066 at 55515) ready for memtest.

    I noticed that if I set ddr voltage to normal (using Manual system voltage control) that it was 2.064V. if I set it to +.2V it was 2.064V. If I set it to +.1v it was 1.9..V.

    The CPU-Z SPD panel says 2.050v under the EPp#1 column. Memset shows 2.050V as well. So I guess the MB must read that EPP info from the memory modules and set voltage as close as it can.

    I'll run memtest tonight.
    cool! GL

    And call the manufacturer too. I searched for the word "Voltage" in the NewEgg reviews last night and didn't find anything except that some MOBOs set it right but most don't.

    By calling the manufacturer or searching this forum (http://forums.tweaktown.com/search.php?f=67) for keywords "P35-S3G" and "Mushkin XP PC2-8500" you can determine what your MOBO does Voltage wise with your RAM.

    When I called Corsair I believe the first question the tech asked was, "Do you have CPU-Z?" lol

    He proceeded to have me recite all my specs and was able to tell me that with this MOBO my RAM would always require +.3v. But if I update the BIOS I'll be sure to double check it myself or even call back Corsaire for additional free advice. They are too cool on the phone! Beyond anything you'd ever expect! (I told the guy he was so helpful that I'd always mention that to ppl.lol)

    GL

    And I just noticed the TweakTown Memory Forum: http://forums.tweaktown.com/f58/
    Last edited by Bee_Dee_3_Dee; 04-07-2009 at 10:34 PM.
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


Page 9 of 16 FirstFirst ... 7891011 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •