Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: q9550 & ud3p @3.8Ghz freezes randomly




  1. #1
    Join Date
    Dec 2008
    Posts
    53

    Question help please! q9550 & ud3p @3.8Ghz freezes randomly

    help please....

    so my system freezes with no ahead note ... i'm o.c. @3.8 and my
    system is :

    GA-EP45-UD3P (rev1.0/F6) & Q9550 @ 3.8Ghz (AC freezer 7 pro)
    4GB DDR2 800mhz OCZ EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    Vista x64


    settings are :
    ******Motherboard Intelligent Tweaker (M.I.T.)******

    Robust Graphics Booster.........................[ Auto ]
    CPU Clock Ratio.................................[ 8 ]
    Fine CPU Clock Ratio............................[ + 0.0 ]
    CPU Frequency 3.8GHz............................[ 475 x 8.0 ]

    ******Clock Chip Control******

    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 475 ]
    PCI Express Frequency (Mhz).....................[ 100 ]
    C.I.A 2 [Disabled]

    ******Advanced Clock Control******

    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 0ps ]

    ******DRAM Performance Control******

    Performance Enhance.............................[Standard]
    (G) MCH Frequency Latch.........................[ AUTO]
    System Memory Multipler.........................[ 2.00D]
    Memory Frequency 800............................[ 950]
    DRAM Timing Selectable..........................[ Manual]

    CAS Latency Time................................[ 5]
    tRCD............................................[ 5]
    tRP.............................................[ 5]
    tRAS............................................[ 15 ]

    ******Advanced Timing Control******

    tRRD............................................[ 4 ]
    tWTR............................................[ 4 ]
    tWR.............................................[ 5 ]
    tRFC............................................[ 55 ]
    tRTP............................................[ 4 ]
    Command Rate (cmd)..............................[ 2 ]

    ******Channel A Timing Settings******

    Static tRead Value ...............[ 9 ]
    tRD Phase0 Adjustment ................[ Auto ]
    tRD Phase1 Adjustment ................[ Auto ]
    tRD Phase2 Adjustment ................[ Auto ]
    tRD Phase3 Adjustment ................[ Auto ]

    tRD 2rd (Differnt Rank) ................[ Auto ]
    tWR 2wr (Differnt Rank) ................[ Auto ]
    tWR 2rd (Differnt Rank) ................[ Auto ]
    tRD 2wr (Same/Difft Rank) ................[ Auto ]

    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel A Driving Settings******

    Drive Strength Profile..........................[ 800MHZ ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]

    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Channel B Timing Settings******

    Static tRead Value ...............[ 9 ]
    tRD Phase0 Adjustment ................[ Auto ]
    tRD Phase1 Adjustment ................[ Auto ]
    tRD Phase2 Adjustment ................[ Auto ]
    tRD Phase3 Adjustment ................[ Auto ]

    tRD 2rd (Differnt Rank) ................[ Auto ]
    tWR 2wr (Differnt Rank) ................[ Auto ]
    tWR 2rd (Differnt Rank) ................[ Auto ]
    tRD 2wr (Same/Difft Rank)................[ Auto ]

    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel B Driving Settings******

    Drive Strength Profile..........................[800MHZ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]

    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Motherboard Voltage Control******

    Load-Line Calibration...........................[ disable ]
    CPU Vcore [ 1.21250 ]...................[ 1.28125V ]
    CPU Termination [ 1.20 ]...................[ 1.240V ]
    CPU PLL [ 1.50 ]...................[ 1.590V ]
    CPU Reference [ 0.760 ]...................[ 0.785V ]

    MCH Core [ 1.100 ]...................[ 1.22V]
    MCH Reference [ 0.760 ]...................[ 0.825V ]
    MCH/DRAM Refernce [ 0.900 ]...................[0.9V ]
    ICH I/O [ 1.500 ]...................[ 1.57V ]
    ICH Core [ 1.100 ]...................[ 1.2V]

    DRAM Voltage [ 1.800 ]...................[ 2.1V]
    DRAM Termination [ 0.900 ]...................[0.9V]
    Channel A Ref [ 0.900 ]...................[ 0.9V]
    Channel B Ref [ 0.900 ]...................[0.9V]
    every test i run .. prim95/OCCT/intelburntest and memtest 12hrs run pass... there is no crash log/dump file or noting else i could analyze in the eventView... just freeze (that was restart before i disabled the auto restart ).


    mostly those freezes happens at night when i'm not around but today for the first time it happend when i was just fastfwarding a movie in mediaplayer classic (not an HD movie even).

    please help me resovle this annoying thing ... 10x in advance
    Last edited by nafroman; 04-01-2009 at 08:23 PM. Reason: no reply
    ==================
    GA-EP45-UD3P & Q9550 @ 3.8Ghz
    4GB DDR2 OCZ
    EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    win7 x64

  2. #2
    Join Date
    Dec 2008
    Posts
    53

    Default Re: q9550 & ud3p @3.8Ghz freezes randomly

    no one ? please
    ==================
    GA-EP45-UD3P & Q9550 @ 3.8Ghz
    4GB DDR2 OCZ
    EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    win7 x64

  3. #3
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: q9550 & ud3p @3.8Ghz freezes randomly

    Aside from the testing programs ,Id try hiting 480 fsb on the settings you have now ,if that goes ok try 485.
    If you dont get a boot+ testing done in windows at 480 your settings may be too low.Even if things dont go well for 485 you may have to up some voltages/change memory timings.

    do you have EIST etc enabled?
    The cpu and mch vlts seem a little low to me especially with llc disabled for 475.
    Then again its awhile since I tried that bus speed.
    perhaps ambient air temps are warming up now and you need to compensate for that .
    Could also try s read 10 and /or turbo +2:00B multiplier.
    What is 2.1v dram voltage?. Is it what youve found works for 950 mem speed or is it the vlts on the memory for 800 mhz?
    The dram ref voltages,if you are going to use them are supposed to be up to 50% of the applied memory v ,perhaps a little less to account for vdrop.
    I used to use 1.08 on mine,but didnt find a difference,I just leave it on auto now.
    Have you tried running a slightly higher fsb and what were the voltages needed?
    Did you have higher voltages dialed in when you originally hit 475 and just pulled them back a bit to see what was the minimum needed?
    Mho^.
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  4. #4
    Join Date
    Dec 2008
    Posts
    53

    Default Re: q9550 & ud3p @3.8Ghz freezes randomly

    wow.. that was some "kick" (:...

    Could also try s read 10 and /or turbo +2:00B multiplier.
    i don't know what's "s read 10"... and Lsdmeasap advice me to stay on 2.00D...long ago... i don't remember why.


    What is 2.1v dram voltage?. Is it what youve found works for 950 mem speed or is it the vlts on the memory for 800 mhz?
    2.1V is the voltage that written on my mem sticker.

    this random resets bugged me from the beginning... but it wasn't so disturbing as now...

    and i used a different approach for the o.c... some say raise the volt up and away... and then when everything running smooth try to lower. i raised them step by step...whenever crash/blue screen/test fail...
    ==================
    GA-EP45-UD3P & Q9550 @ 3.8Ghz
    4GB DDR2 OCZ
    EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    win7 x64

  5. #5
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: q9550 & ud3p @3.8Ghz freezes randomly

    cant really expect memory to run at nearly 20% over its rated speed at the voltage recommended for that speed,I would think.
    The memory wont be getting 2.1 v while the pc is running either,should be a little bit of vdrop,
    If it does run say all the way to 1000mhz with 2.1 v entered in bios,great,but try the above,ie 480 mhz/485 mhz,if it isnt happening some voltage increases on components should do it and if they do,you know u were right on the operating edge on 475 bus speed.Watch do not exceed temps of course.
    10 is the static read I was suggesting to try instead of 9.
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  6. #6
    Join Date
    Dec 2008
    Posts
    53

    Default Re: q9550 & ud3p @3.8Ghz freezes randomly

    thanks man... i will try your suggestion.. and report back
    ==================
    GA-EP45-UD3P & Q9550 @ 3.8Ghz
    4GB DDR2 OCZ
    EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    win7 x64

  7. #7
    Join Date
    Dec 2008
    Posts
    53

    Default Re: q9550 & ud3p @3.8Ghz freezes randomly

    hello again... so 48 hours of work after i raise the CPU Vcore a bit ant everything seems working fine... i got this weird BSOD..(it was in the middle of the night and the screen went from black power saving to blue...directlly on my face while sleeping..for a momment i thought god is revealing...then i opend my eyes and show the BSOD horror)

    the Bsod basically said "DRIVER_IRQL_NOT_LESS_OR_EQUAL" ...so i digged a little with windbgx64 ...and this is the full dump file.... if anyone can give a hand i'll be grateful


    Code:
    Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    
    
    Loading Dump File [C:\Windows\Minidump\Mini040309-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    
    Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: 
    Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 6001.18145.amd64fre.vistasp1_gdr.080917-1612
    Machine Name:
    Kernel base = 0xfffff800`0261c000 PsLoadedModuleList = 0xfffff800`027e1db0
    Debug session time: Fri Apr  3 04:51:07.180 2009 (GMT+3)
    System Uptime: 2 days 7:59:41.393
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    .................................................
    Loading User Symbols
    Loading unloaded module list
    ..................................................
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck D1, {0, 2, 1, fffffa80083ebcbd}
    
    Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+20b )
    
    Followup: MachineOwner
    ---------
    
    3: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high.  This is usually
    caused by drivers using improper addresses.
    If kernel debugger is available get stack backtrace.
    Arguments:
    Arg1: 0000000000000000, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
    Arg4: fffffa80083ebcbd, address which referenced memory
    
    Debugging Details:
    ------------------
    
    
    WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002845080
     0000000000000000 
    
    CURRENT_IRQL:  2
    
    FAULTING_IP: 
    +0
    fffffa80`083ebcbd ??              ???
    
    CUSTOMER_CRASH_COUNT:  1
    
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    
    BUGCHECK_STR:  0xD1
    
    PROCESS_NAME:  System
    
    TRAP_FRAME:  fffffa60019f9170 -- (.trap 0xfffffa60019f9170)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=351f1f000102a8c0 rbx=0000000000000000 rcx=0000000000000020
    rdx=fffffa8068d99008 rsi=0000000000000000 rdi=0000000000000000
    rip=fffffa80083ebcbd rsp=fffffa60019f9308 rbp=000000000000152b
     r8=000000000000e1cc  r9=000000000000070e r10=0102a8c0000118b1
    r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na pe nc
    fffffa80`083ebcbd ??              ???
    Resetting default scope
    
    LAST_CONTROL_TRANSFER:  from fffff800026710ee to fffff80002671350
    
    STACK_TEXT:  
    fffffa60`019f9028 fffff800`026710ee : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
    fffffa60`019f9030 fffff800`0266ffcb : 00000000`00000001 00000000`00000104 00000000`c0000000 fffffa80`0839a0d8 : nt!KiBugCheckDispatch+0x6e
    fffffa60`019f9170 fffffa80`083ebcbd : fffffa80`083b87f6 fffffa60`00000064 00000000`0000fe04 fffffa60`019f9350 : nt!KiPageFault+0x20b
    fffffa60`019f9308 fffffa80`083b87f6 : fffffa60`00000064 00000000`0000fe04 fffffa60`019f9350 00000000`00000000 : 0xfffffa80`083ebcbd
    fffffa60`019f9310 fffffa60`00000064 : 00000000`0000fe04 fffffa60`019f9350 00000000`00000000 fffffa80`0839a030 : 0xfffffa80`083b87f6
    fffffa60`019f9318 00000000`0000fe04 : fffffa60`019f9350 00000000`00000000 fffffa80`0839a030 fffffa80`083b7b76 : 0xfffffa60`00000064
    fffffa60`019f9320 fffffa60`019f9350 : 00000000`00000000 fffffa80`0839a030 fffffa80`083b7b76 fffffa80`0839a0d8 : 0xfe04
    fffffa60`019f9328 00000000`00000000 : fffffa80`0839a030 fffffa80`083b7b76 fffffa80`0839a0d8 00000000`000012d1 : 0xfffffa60`019f9350
    
    
    STACK_COMMAND:  kb
    
    FOLLOWUP_IP: 
    nt!KiPageFault+20b
    fffff800`0266ffcb 488d058e320000  lea     rax,[nt!ExpInterlockedPopEntrySList (fffff800`02673260)]
    
    SYMBOL_STACK_INDEX:  2
    
    SYMBOL_NAME:  nt!KiPageFault+20b
    
    FOLLOWUP_NAME:  MachineOwner
    
    MODULE_NAME: nt
    
    IMAGE_NAME:  ntkrnlmp.exe
    
    DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35
    
    FAILURE_BUCKET_ID:  X64_0xD1_nt!KiPageFault+20b
    
    BUCKET_ID:  X64_0xD1_nt!KiPageFault+20b
    
    Followup: MachineOwner
    ---------
    
    3: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high.  This is usually
    caused by drivers using improper addresses.
    If kernel debugger is available get stack backtrace.
    Arguments:
    Arg1: 0000000000000000, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
    Arg4: fffffa80083ebcbd, address which referenced memory
    
    Debugging Details:
    ------------------
    
    
    WRITE_ADDRESS:  0000000000000000 
    
    CURRENT_IRQL:  2
    
    FAULTING_IP: 
    +0
    fffffa80`083ebcbd ??              ???
    
    CUSTOMER_CRASH_COUNT:  1
    
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    
    BUGCHECK_STR:  0xD1
    
    PROCESS_NAME:  System
    
    TRAP_FRAME:  fffffa60019f9170 -- (.trap 0xfffffa60019f9170)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=351f1f000102a8c0 rbx=0000000000000000 rcx=0000000000000020
    rdx=fffffa8068d99008 rsi=0000000000000000 rdi=0000000000000000
    rip=fffffa80083ebcbd rsp=fffffa60019f9308 rbp=000000000000152b
     r8=000000000000e1cc  r9=000000000000070e r10=0102a8c0000118b1
    r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na pe nc
    fffffa80`083ebcbd ??              ???
    Resetting default scope
    
    LAST_CONTROL_TRANSFER:  from fffff800026710ee to fffff80002671350
    
    STACK_TEXT:  
    fffffa60`019f9028 fffff800`026710ee : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
    fffffa60`019f9030 fffff800`0266ffcb : 00000000`00000001 00000000`00000104 00000000`c0000000 fffffa80`0839a0d8 : nt!KiBugCheckDispatch+0x6e
    fffffa60`019f9170 fffffa80`083ebcbd : fffffa80`083b87f6 fffffa60`00000064 00000000`0000fe04 fffffa60`019f9350 : nt!KiPageFault+0x20b
    fffffa60`019f9308 fffffa80`083b87f6 : fffffa60`00000064 00000000`0000fe04 fffffa60`019f9350 00000000`00000000 : 0xfffffa80`083ebcbd
    fffffa60`019f9310 fffffa60`00000064 : 00000000`0000fe04 fffffa60`019f9350 00000000`00000000 fffffa80`0839a030 : 0xfffffa80`083b87f6
    fffffa60`019f9318 00000000`0000fe04 : fffffa60`019f9350 00000000`00000000 fffffa80`0839a030 fffffa80`083b7b76 : 0xfffffa60`00000064
    fffffa60`019f9320 fffffa60`019f9350 : 00000000`00000000 fffffa80`0839a030 fffffa80`083b7b76 fffffa80`0839a0d8 : 0xfe04
    fffffa60`019f9328 00000000`00000000 : fffffa80`0839a030 fffffa80`083b7b76 fffffa80`0839a0d8 00000000`000012d1 : 0xfffffa60`019f9350
    
    
    STACK_COMMAND:  kb
    
    FOLLOWUP_IP: 
    nt!KiPageFault+20b
    fffff800`0266ffcb 488d058e320000  lea     rax,[nt!ExpInterlockedPopEntrySList (fffff800`02673260)]
    
    SYMBOL_STACK_INDEX:  2
    
    SYMBOL_NAME:  nt!KiPageFault+20b
    
    FOLLOWUP_NAME:  MachineOwner
    
    MODULE_NAME: nt
    
    IMAGE_NAME:  ntkrnlmp.exe
    
    DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35
    
    FAILURE_BUCKET_ID:  X64_0xD1_nt!KiPageFault+20b
    
    BUCKET_ID:  X64_0xD1_nt!KiPageFault+20b
    
    Followup: MachineOwner
    ---------
    i don't know if automatically relevant this to my o.c , or it could be something else...since the system worked for nearly 48 hours...
    and i never had BSOD before...with or without o.c .
    ==================
    GA-EP45-UD3P & Q9550 @ 3.8Ghz
    4GB DDR2 OCZ
    EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    win7 x64

  8. #8
    Join Date
    Dec 2008
    Posts
    53

    Default Re: q9550 & ud3p @3.8Ghz freezes randomly

    could someone please give me a link to F9a bios for the E45UD3P...

    i see some people saying that F9b is not good as F9a... but i didnt manage to find a link to download.. I'm using F6 .... and i think maybe F9a would do some good with my problem.
    ==================
    GA-EP45-UD3P & Q9550 @ 3.8Ghz
    4GB DDR2 OCZ
    EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    win7 x64

  9. #9
    Join Date
    Apr 2009
    Posts
    54

    Default Re: q9550 & ud3p @3.8Ghz freezes randomly

    Quote Originally Posted by nafroman View Post
    could someone please give me a link to F9a bios for the E45UD3P...

    i see some people saying that F9b is not good as F9a... but i didnt manage to find a link to download.. I'm using F6 .... and i think maybe F9a would do some good with my problem.
    From my research trying beta bios isnt a good idea,how did you flash? windows? im using f8 really no trouble so far at 4.0,havent tryed any higher yet.
    ASROCK KK10N78M
    AMN PHENOMII X3-740 BE
    WD 500 GIG HDD
    GAMMAXX 300 DEEP COOL
    2X1 CRUCIAL BALLISICKS
    ANTEC EARTHWATTS 585 WATT PSU
    2XLITE ON BURNERS
    6X45 WATT LAMPTRON FC2 FAN CONT.
    ASUS 210 VIDEO CARD
    RAIDMAX DIRK TOOTH SMILADON CASE

  10. #10
    Join Date
    Dec 2008
    Posts
    53

    Default Re: q9550 & ud3p @3.8Ghz freezes randomly

    no no no ... i didnt flash through windows... i just want a f9a link... there is no trouble with the bios if that what you understood from my previous reply .
    Last edited by nafroman; 04-04-2009 at 11:40 PM.
    ==================
    GA-EP45-UD3P & Q9550 @ 3.8Ghz
    4GB DDR2 OCZ
    EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    win7 x64

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •