Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: need help with my EP45C-UD3R several problems




  1. #1
    Join Date
    Apr 2009
    Posts
    10

    Unhappy need help with my EP45C-UD3R several problems

    Hello there,
    I'm inquiring about issues that i am having with the motherboard, several in fact. Number one, when i boot and/or reboot, about half the time, it doesn't even reach post before it reboots and then continues that cycle till i actually switch my psu off. Number two, when i am able to reach windows i get windows xp crashing. on average i get between 15 to 30 minutes before it crashes.
    Now I didn't initially change the bios settings, but as soon as the problems occured I started reading the other threads from here and other sites as well. I tried updating the bios with @bios. I tried setting optimized defaults trick from a thread on here, and it seems to no avail.
    here is a list of the hardware i'm running in this comp

    intel Q8200
    Ocz ddr2 pc2 8500 (sli ready edition)
    Nvidia Geforce 9800 gtx+ from sparkle
    GA EP45C-UD3R
    Raidmax Hybrid 2 Rx-630ss 630w
    WD 250gb hdd (sata)

    sorry if some of these don't need to be listed

  2. #2
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: need help with my EP45C-UD3R several problems

    NEVER use @Bios for flashing, there's a good chance that you'll brick your mobo. Read the Bios Flashing Guide for more info.

    To help you get your system stable, download the generic bios template here and fill in your current bios settings. Also include a link to your ram's specs.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #3
    Join Date
    Apr 2009
    Posts
    10

    Default Re: need help with my EP45C-UD3R several problems

    Ok here is my bios settings as they are now


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 7x
    Fine CPU Clock Ratio.....................:n/a
    CPU Frequency ...........................: 2.33ghz(333x7)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:[Auto]

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: [800mV]
    PCI Express Clock Drive.................: [900mV]
    CPU Clock Skew (ps)....................: [ 0ps]
    MCH Clock Skew (ps)...................: [ 0ps]


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: [Auto]
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [Atuo]
    Memory Frequency (Mhz) ..............: 1066Mhz
    DRAM Timing Selectable ................: [Auto]

    Standard Timing Control
    CAS Latency Time........................ 5 Auto
    tRCD ......................................... 5 Auto
    tRP'........................................... 5 Auto
    tRAS.......................................... 15 Auto

    Advanced Timing Control

    tRRD........................................... 4 Auto
    tWTR.......................................... 4 Auto
    tWR............................................ 6 Auto
    tRFC........................................... 56 Auto
    tRTP........................................... 4 Auto
    Command Rate (CMD) ....................: o Auto

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................:8 Auto
    tRD Phase0 Adjustment...................: 0 Auto
    tRD Phase1 Adjustment...................: 0 Auto
    tRD Phase2 Adjustment .................: 0 Auto
    tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................: 8 Auto
    Twr2wr(Different Rank)...................: 8 Auto
    Twr2rd(Different Rank)...................: 7 Auto
    Trd2wr(Same/Diff Rank)..................: 9 Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto
    DDR Write Training.....................: Auto
    Channel B
    Static tRead Value.........................:8 Auto
    tRD Phase0 Adjustment...................: 0 Auto
    tRD Phase1 Adjustment...................: 0 Auto
    tRD Phase2 Adjustment .................: 0 Auto
    tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................: 8 Auto
    Twr2wr(Different Rank)...................: 8 Auto
    Twr2rd(Different Rank)...................: 7 Auto
    Trd2wr(Same/Diff Rank)..................: 9 Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto
    DDR Write Training.....................: Auto
    Motherboard Voltage Control
    Voltage Types.………... Normal Current (unable to change this, its in dark grey lettering)
    CPU
    Load-Line Calibration..................: [Disabled]
    CPU Vcore….……….........1.22500V........:Auto
    CPU Termination…..... 1.200V.......: Auto
    CPU PLL…………………....1.500V.......: Auto
    CPU Reference.…………....0.760V.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: Auto
    MCH Reference….…….0.760V...........: Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: Auto
    ICH Core…………...……1.100V............: Auto

    DRAM
    DRAM Voltage ……....1.800V............: 2.100V
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: N/A
    x C4/C4E State Support..................: N/A
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: N/A

    Integrated Peripherals
    Legacy USB Storage Detect ..............: N/A (Actually in my bios this is called "usb storage function" which enables or disables Legacy support of usb mass storage) and it is Enabled</pre>
    This Template didn't cover all the options in each of the bios menus, that were mentioned, that is on my bios. N/A means that I did not have that option listed in my bios. So if you need more info let me know.

    And here is the link for my ram
    OCZ Technology | Products | Memory | OCZ DDR2 PC2-8500 SLI-Ready Edition Dual Channel

  4. #4
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: need help with my EP45C-UD3R several problems

    hello fellow 8200 person :0
    Do you have a decent cpu cooler?
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  5. #5
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: need help with my EP45C-UD3R several problems

    Well Im assuming u do..
    for 3.43 Ghz..490fsb



    Quote Originally Posted by Heathrow83 View Post
    Ok here is my bios settings as they are now


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 7x
    Fine CPU Clock Ratio.....................:n/a
    CPU Frequency ...........................: 3.43ghz(490x7)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 490Mhz
    PCI Express Frequency (Mhz) .........:[100]

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: [800mV]
    PCI Express Clock Drive.................: [900mV]
    CPU Clock Skew (ps)....................: [ 0ps]
    MCH Clock Skew (ps)...................: [ 0ps]


    DRAM Performance Control
    Performance Enhance...................: [Turbo]
    Extreme Memory Profile (X.M.P.).....: [Auto]
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [2:00B]
    Memory Frequency (Mhz) ..............: 980 Mhz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15

    Advanced Timing Control

    tRRD........................................... 4 Auto
    tWTR.......................................... 4 Auto
    tWR............................................ 6 Auto
    tRFC........................................... 56 Auto
    tRTP........................................... 4 Auto
    Command Rate (CMD) ....................: Auto

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................:9/10 or Auto
    tRD Phase0 Adjustment...................: 0 Auto
    tRD Phase1 Adjustment...................: 0 Auto
    tRD Phase2 Adjustment .................: 0 Auto
    tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................: 8 Auto
    Twr2wr(Different Rank)...................: 8 Auto
    Twr2rd(Different Rank)...................: 7 Auto
    Trd2wr(Same/Diff Rank)..................: 9 Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto
    DDR Write Training.....................: Auto
    Channel B
    Static tRead Value.........................:9/10 or Auto
    tRD Phase0 Adjustment...................: 0 Auto
    tRD Phase1 Adjustment...................: 0 Auto
    tRD Phase2 Adjustment .................: 0 Auto
    tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................: 8 Auto
    Twr2wr(Different Rank)...................: 8 Auto
    Twr2rd(Different Rank)...................: 7 Auto
    Trd2wr(Same/Diff Rank)..................: 9 Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto
    DDR Write Training.....................: Auto
    Motherboard Voltage Control
    Voltage Types.………... Normal Current (unable to change this, its in dark grey lettering)
    CPU
    Load-Line Calibration..................: [Enabled]
    CPU Vcore….……….........1.22500V........:1.38-1.39375
    CPU Termination…..... 1.200V.......: Auto
    CPU PLL…………………....1.500V.......: Auto
    CPU Reference.…………....0.760V.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.36-1.40
    MCH Reference….…….0.760V...........: Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: Auto
    ICH Core…………...……1.100V............: Auto

    DRAM
    DRAM Voltage ……....1.800V............: 2.1-2.16V
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: N/A
    x C4/C4E State Support..................: N/A
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: N/A

    Integrated Peripherals

    Legacy USB Storage Detect ..............: N/A (Actually in my bios this is called "usb storage function" which enables or disables Legacy support of usb mass storage) and it is Enabled
    </PRE>
    This Template didn't cover all the options in each of the bios menus, that were mentioned, that is on my bios. N/A means that I did not have that option listed in my bios. So if you need more info let me know.

    And here is the link for my ram
    OCZ Technology | Products | Memory | OCZ DDR2 PC2-8500 SLI-Ready Edition Dual Channel

    That should get you 3.43 on cpu,If you bring it down to 480 fsb you will be able to drop voltages a little.
    You will need to run it down to 450 or so fsb to try running your memory on the 2.4B multiplier,but by then the cpu will be getting a bit slow.
    Of course you can allways try hitting 510-520 fsb to go for 3.6ghz on the cpu.
    My own memory wont take that (reliably).
    Gl.
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  6. #6
    Join Date
    Apr 2009
    Posts
    10

    Lightbulb Re: need help with my EP45C-UD3R several problems

    Well kick I only have the cpu fan that came with it. I found out that my ram was under powered and not matching the fsb. So I set my ram speed to 1333MHz and my ram to 2.2V, and my system is now stable. Before i fixed it I was getting blue screens galore. Also I discovered i wasn't properly powering my vid card, and that seemed to stop the post failings. So right now i'm just gonna be running at these settings till i can budget for a larger heatsink and fan. Then I'll do some good o/c.

    The last computer i had i knew the bios well enough to overclock. This one, however, is alien to me. So many more adjustments and terms that i'm gonna have to take time to figure what does what and how it affects the setup. If you know where i can read up on the settings or if you know what they do and how they can make things better or worse. That would be greatly appreciated. Also if you know good stable overclock settings with my stock setup, that would be awesome.

    To the others who shared same or similar symptoms and remedied them another way let me know. I always like knowing more about the board and what its capable of doing.

  7. #7
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: need help with my EP45C-UD3R several problems

    With your stock cpu cooler & fan, you can probably o/c by 10% - 20% and your temps will be higher but still at an acceptable range. The cpu case & fan setup contributes to overall system cooling.

    We can help you with a modest overclock. Many bios settings are left on AUTO unless you're going for the highest o/c possible. Overclocking involves a lot of stability testing. Having a stable system does NOT mean that you're able to run in windows and you don't have BSODs or freezing. If you don't do proper stability testing, you risk file corruption and potentially serious system degradation.

    There are some memory timing tweaks that will improve your memory's performance at any cpu speed.

    Your memory is rated at 2.10 - 2.30 volts, but the website says....
    <small>**Do not exceed 2.1V specification if listed on the module label</small>
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  8. #8
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: need help with my EP45C-UD3R several problems

    Feel lucky? Here's a setup that will give you a 20% o/c, hopefully stable.
    If not, use these settings but change:
    CPU Host Frequency = 366 MHz
    Watch you temps!
    note: with some AUTO settings, the value displayed in the bios is only the NORMAL setting, not what AUTO will set.

    ==> Use the bios PROFILES to save your stable and testing setups <==
    ===========================
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 7x
    Fine CPU Clock Ratio.....................:n/a
    CPU Frequency ...........................: 2.807ghz(401x7)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled] <== set to Enabled
    CPU Host Frequency (Mhz) ............: 401MHz
    PCI Express Frequency (Mhz) .........:[Auto] <== set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: [800mV]
    PCI Express Clock Drive.................: [900mV]
    CPU Clock Skew (ps)....................: [ 0ps]
    MCH Clock Skew (ps)...................: [ 0ps]


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: [Auto] <== set to DISABLED
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier ..............: [2.66D]
    Memory Frequency (Mhz) ..............: 1069Mhz
    DRAM Timing Selectable .................: [Auto] <== set to MANUAL

    Standard Timing Control
    CAS Latency Time........................ 5 Auto <== manually set to 5
    tRCD .......................................... 5 Auto <== manually set to 5
    tRP ............................................. 5 Auto <== manually set to 5
    tRAS ......................................... 15 Auto <== manually set to 15

    Advanced Timing Control

    tRRD ......................................... 4 Auto <== leave on AUTO
    tWTR ......................................... 4 Auto <== leave on AUTO
    tWR ........................................... 6 Auto <== leave on AUTO
    tRFC ........................................ 56 Auto <== leave on auto for now
    tRTP ........................................... 4 Auto <== leave on AUTO
    Command Rate (CMD) ................: o Auto <== leave on AUTO

    Driving Strength Profiles
    Driving Strength ............................ [Auto] <== leave on auto for now

    Channel A
    Static tRead Value.........................:8 Auto <== manually set to 8 for now
    tRD Phase0 Adjustment................: 0 Auto
    tRD Phase1 Adjustment................: 0 Auto
    tRD Phase2 Adjustment ...............: 0 Auto
    tRD Phase3 Adjustment................: 0 Auto
    Trd2rd(Different Rank)..................: 8 Auto
    Twr2wr(Different Rank)................: 8 Auto
    Twr2rd(Different Rank).................: 7 Auto
    Trd2wr(Same/Diff Rank)...............: 9 Auto
    Dimm1 Clock Skew Control.............: Auto
    Dimm2 Clock Skew Control.............: Auto
    DDR Write Training...........................: Auto
    Channel B
    ==> use the exact same settings as Channel A <==
    Motherboard Voltage Control
    Voltage Types.………... Normal Current (unable to change this, its in dark grey lettering)
    CPU
    Load-Line Calibration..................: [Disabled]
    CPU Vcore............1.22500V................:Auto <== manually set to 1.2250 (you might have to increase this by 1 setting)
    CPU Termination .......…..... 1.200V.......: Auto<== manually set to 1.20
    CPU PLL ........................... 1.500V.......: Auto<== manually set to 1.50
    CPU Reference ................. 0.760V.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: Auto <== manually set to 1.20 or possibly higher (1.22 - 1.24, or 1.05 if you have boot problems)
    MCH Reference….…….0.760V...........: Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: Auto<== manually set to 1.50
    ICH Core…………...……1.100V............: Auto<== manually set to 1.10 (1.20 might be needed)

    DRAM
    DRAM Voltage ……....1.800V............: 2.100V
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled] <== manually set to Disabled
    C2/C2E State Support....................: N/A
    x C4/C4E State Support..................: N/A
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]<== manually set to Disabled
    Virtualization Technology................: N/A
    Last edited by profJim; 04-05-2009 at 09:12 PM. Reason: correction
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  9. #9
    Join Date
    Apr 2009
    Posts
    10

    Default Re: need help with my EP45C-UD3R several problems

    Ok everyone. I just got my first power error during post. I got the continuous short beeps. so i'm wondering if there is a way to determine whats wrong, or if someone knows what is the right psu for my setup. I thought i bought the right one. I might have a faulty psu (low amperage for start up). so if someone can help me on this (I know this isn't really related to my motherboard) I will greatly appreciate the help.

    My build

    intel q8200
    ocz 1gb x2 pc2 8500 (Model# OCZ2N1066SR2GK)
    Raidmax Hybrid 630 watts modular psu (Model# RX-630SS)
    Gigabyte Ep45C-UD3R rev 1.0 (bios is f5c version)
    Raidmax Smillidon Tower (model # ATX-612WB)
    Sparkle Geforce 9800 gtx+ 512mb
    WD 250gb Hdd (SATA2)
    Samsung dvd burner (SATA2)



    Ps Thanks to you guys for helping me out, and giving me some specs for o/c. Definitely try them when I get this thing fixed.

  10. #10
    Join Date
    Apr 2009
    Posts
    10

    Default Re: need help with my EP45C-UD3R several problems

    One thing after another with this build.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •