Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 5 FirstFirst ... 345
Results 41 to 42 of 42

Thread: E8400 Safe Voltage Help




  1. #41

    Default Re: E8400 Safe Voltage Help

    Quote Originally Posted by profJim View Post
    Just in case you need some inspiration.....
    If you feel that you're dreaming the impossible dream.....
    When the odds are against you.....

    .....check this out.....and watch/listen to all 7 minutes.
    What a coincidence! I was going to finally watch that today. Thanks for the link! I'm switching to game PC to crank the Sennheiser Head Phones up all the way!

    Listen to this entire 5:41. (To this day, its considered the hardest thing to play with all of its nuances, and phrasing properly followed. And "Jascha Heifetz" will always forever be a Top Dog!)

    I bookmarked it last night just after that Bohemian Rhapsody. Susan would have choked me up if it wasn't for entire 5:41. All I can say is talent like Susan is rare. But most uncommon of all is how the "good looking" rarely fail NOT to take the place of people with greater talent because the Music industry in America is all about making money with their Commercial Music. Who can blame them? Go figure. oops! no pun intended.

    But even on the commercial side...

    What if Susan teamed up with that great Blues Harp guy?

    What's his name?

    The Blues Traveler guy. John Popper! That's him, them, him!

    The Blues Traveler's video, "Run-Around" is a spoof about looks. Its the one about another band standing in and lip sinking their music... because the Stand-In band's looks being much better from a commercial stand point, or just that John Popper's looks are not that acceptable, must be addressed is the spoof.

    It was hard for him to be accepted. But now that John Popper is so super successful and nobody cares about his looks anymore...

    ...if Susan sang with John Poper it would be too awesome.One Brit and one Yank to raise all our morals in these terrible times would be too SWEET!!!

    Thanks again for the link!
    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


  2. #42

    Default Re: E8400 Safe Voltage Help

    Rather than ever relying on all Auto settings. Other than when using Optimal Defaults"; Wouldn't manually setting the Manufacturer's intended timings yourself be a good plan to implement?

    Based on the following "Optimal_Defaults_BIOS_Timings_SS" and "MemSet/_MemSet SPD_SS" that were taken using Optimal defaults; What are my RAM's proper SPD's Default Timings?

    Code:
    ********** Standard Timing Control ************_____
    CAS Latency Time________________5__[5]______________
    Dram RAS# to CAS# Delay_________5__[5]______________
    Dram RAS# Precharge Delay_______5__[5]______________
    Precharge Delay (tRAS)__________5__[15]_____________
    ********** Advanced Timing Control ************_____
    ACT to ACT Delay (tRRD)________ 3__[4]__(<< Right?)__
    Rank Write to READ Delay_______ 3__[Auto]____(<< ???)____
    Write to Precharge Delay_______ 6__[Auto]____(<< ???)____
    Refresh to ACT Delay___________52__[ 68](<< The only obvious one.)
    Read to Precharge Delay________ 3__[Auto]____(<< ???)____
    Static tRead Value_____________ 7__[Auto]____(<< ???)____
    Static tRead Phase Adjust______25__[Auto](<< Always use "Auto". Right?)
    ____________________________________________________











    THANK YOU!!!

    <<< LGA2011 System Summary >>>
    > Power Supply: CORSAIR AX Series AX860 860W 80 PLUS PLATINUM Haswell Ready Full Modular (NE Link)
    > Chipset : Intel X99
    > Mainboard :Gigabyte GA-X99-Ultra Gaming
    (NE Link)
    > Processor : i7-6850K (NE Link)
    > AIO: Corsair Hydro Series H100i V2 (NE Link)
    > Physical Memory : G.SKILL TridentZ Series 32GB (4 x 8GB) DDR4 3200 Model F4-3200C14Q-32GTZSW (NE Link)
    > Video Card : 2x ASUS ROG STRIX-GTX1070-O8G-GAMING (NE Link)


    <<< LGA1366 System Summary >>>
    > Power Supply:
    >>>Original PSU (2011-01) :
    Corsair 620HX (NE Link)
    >>>Upgrade PSU (2012-01) : CORSAIR AX850 (CMPSU-850AX) 850W (NE Link)
    > Chipset : Intel X58
    > Mainboard : Gigabyte GA-X58A-UD3R (REV.2.0) (FB BIOS)
    (NE Link MPP Link)
    > Processor : i7-950 (Revision D0) 3.0GHz @3.84GHz
    (NE Link MPP Link)
    > HSF:
    Noctua NH-D14 (NE Link MPP Link)
    > Physical Memory :
    >>>Original RAM (2011-01) : G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 1600 (PC3 12800) Model F3-12800CL9T-6GBNQ
    >>>Upgrade RAM (2012-01) : Mushkin Enhanced Blackline 12GB (3 x 4GB) 240-Pin DDR3 2000 (PC3 16000) w/FrostByte Heatsink Model 998990 (NE Link MPP Link OverClockersClub Dot Com Article)
    > Video Card :
    >>>Original Vid Card (2011-01) : BFG Geforce GTX295 (
    NE Link)
    >>>Upgrade Vid Card(2012-01) : (2) EVGA 02G-P3-1568-KR GTX 560 Ti (2GB)-SLI (
    NE Link)
    >>>Upgrade Vid Card(2013-07) : (2) GTX 760-SLI Gigabyte GV-N760OC-4GB (NE Link)
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    > Monitor :
    ViewSonic Pro Series VP2655wb Black 26" (
    NE Link)
    > Operating System : Windows 7 Ultimate
    > Case : COOLER MASTER HAF X RC-942-KKN1 Black Steel (
    NE Link)

    <<< LGA775 System Summary >>>
    > Power Supply: Corsair 620HX (
    NE Link)
    > Mainboard : Gigabyte P35-S3G (F2 BIOS)
    > Chipset : Intel P35
    > Processor : Core 2 Duo E8400 Wolfdale (Revision C0) 3.0GHz @ 3950 MHz
    > HSF: Arctic Cooling Freezer 7 Pro
    > Physical Memory : CORSAIR DOMINATOR 4GB (2 x 2GB) (
    Link)
    > Video Card : BFG Geforce GTX295
    > DVD-Rom Drive : TSSTcorp CDDVDW SH-S203B ATA Device
    >
    Monitor : ViewSonic Pro Series VP2655wb Black 26"
    > Operating System : Windows 7 Ultimate


Page 5 of 5 FirstFirst ... 345

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •