A quick Update.....

After struggling with Blue screens, Non reboots
and various crash at 4.05GHz

I settle for 3.83GHz Following This Bios Setup from (outer...Credit to Him)
with just some increase in the VCore

Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio .......................: [ 9]
Fine CPU Clock Ratio...................: +0.0
CPU Frequency .........................: 3.83GHz

Clock Chip Control
Standard Clock Control
CPU Host Clock Control.................: [Enabled]
CPU Host Frequency (Mhz) ..............: 426Mhz
PCI Express Frequency (Mhz) ...........: 100

C.I.A.2 ...............................: [Disabled]

Advanced Clock Control [Press Enter]
CPU Clock Drive........................: 800mV
PCI Express Clock Drive................: 900mV
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)....................: 0ps

DRAM Performance Control
Performance Enhance....................: [STANDARD]
Extreme Memory Profile (X.M.P.)........: [Disabled]
(G)MCH Frequency Latch.................: Auto
System Memory Multiplier ..............: 2.40D
Memory Frequency (Mhz) ................: 1022
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time.......................: 5
tRCD ..................................: 5
tRP'...................................: 5
tRAS...................................: 15

Advanced Timing Control
tRRD...................................: 5
tWTR...................................: 5
tWR....................................: 8
tRFC...................................: 54
tRTP...................................: 4
Command Rate (CMD) ....................: 2

Driving Strength Profiles
Driving Strength ......................: 1066

Channel A
Static tRead Value.....................: 8
tRD Phase0 Adjustment..................: [Auto]
tRD Phase1 Adjustment..................: [Auto]
tRD Phase2 Adjustment .................: [Auto]
tRD Phase3 Adjustment..................: [Auto]

Trd2rd(Different Rank).................: [Auto]
Twr2wr(Different Rank).................: [Auto]
Twr2rd(Different Rank).................: [Auto]
Trd2wr(Same/Diff Rank).................: [Auto]

Dimm1 Clock Skew Control...............: [Auto]
Dimm2 Clock Skew Control...............: [Auto]
DDR Write Training.....................: [Auto]

Channel B
Static tRead Value.....................: 8
tRD Phase0 Adjustment..................: [Auto]
tRD Phase1 Adjustment..................: [Auto]
tRD Phase2 Adjustment .................: [Auto]
tRD Phase3 Adjustment..................: [Auto]

Trd2rd(Different Rank).................: [Auto]
Twr2wr(Different Rank).................: [Auto]
Twr2rd(Different Rank).................: [Auto]
Trd2wr(Same/Diff Rank).................: [Auto]

Dimm1 Clock Skew Control...............: [Auto]
Dimm2 Clock Skew Control...............: [Auto]
DDR Write Training.....................: [Auto]

Motherboard Voltage Control
Voltage Type...........................: [Manual]

CPU---------------------Normal-----------Current

Load Line Calibration..................: [Disabled]
CPU Vcore...............1.25000V.......: 1.33125V
CPU Termination.........1.200V.........: 1.200V
CPU PLL.................1.500V.........: 1.500V
CPU Reference...........0.760V.........: [Auto]

MCH/ICH
MCH Core................1.100V.........: 1.200V
MCH Reference...........0.760V.........: [Auto]
MCH/DRAM Reference......0.900V.........: [Auto]
ICH I/O.................1.500V.........: 1.500V
ICH Core................1.100V.........: 1.100V

DRAM
DRAM Voltage............1.800V.........: 2.1V
DRAM Termination........0.900V.........: [Auto]
Channel A Reference.....0.900V.........: [Auto]
Channel B Reference.....0.900V.........: [Auto]

Advanced Settings
Limit CPUID Max. to 3..................: [Disabled]
No-Execute Memory Protect..............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support...................: [Disabled]
x C4/C4E State Support.................: [Disabled]
CPU Thermal Monitor 2(TM2) ............: [Enabled]
CPU EIST Function......................: [Disabled]
Virtualization Technology..............: [Disabled]

Integrated Peripherals
Legacy USB Storage Detect .............: [Disabled]


Until Now Stable With 3 hours orthos
OCCT pass
Will try latter Intel burn test

so far Temperature at 30c-33c At low
and 44C during game

I hope I can run 24/7 and I will stop here.....
Let's not get to greedy

I still Worry To flash The Bios To (F9b)
and Brick My Mobo

I can say that without all reading and Help from This Forum
It would have been fare More Difficult...
I was also lucky to get all the New PC running the First Time
and Oc to 3.6 and Later 3.8 without to Much Trouble following The Ready made Bios Samples from (outer.....)

So for The People Out There searching for A new Begining... Your in the Right forum