Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Failure after return from long Hibernation




  1. #1
    Join Date
    Jan 2009
    Posts
    50

    Default Failure after return from long Hibernation

    All set with UD3P with E8400 @ 3.6 (thank to Outer....)
    stable Like a Rock and running 24/7...

    When I Hibernate/Sleep in Vista 64 and press the Keyboard to resume
    from Overnight, the pc start but do not respond and reboot
    when I verified the clock speed with CPUZ it shows 2.999
    Going back into the Bios There is a red warning message stating
    a problem with overclocking or voltage all setting are there i just have to press F10 and I am back to 3.6....

    Strange enough if I hibernate and return shortly no problem..

    Is it a software related or hardware.....?

    Note: I have run all test possible including intel burn for 20pass
    all pass
    Core 2 Duo E8400 (E0)
    Gigabyte EP45-UD3P (F9 Bios)
    Cooler Master V8
    Corsair Dominator 1066 PC2 8500 C5 2x 2gb w/cooling fan
    (5.5.5.15 at 2.1v)
    Western Digital 640 blue caviar (2 unit)
    Palit Hd 4870 sonic dual cooler
    Cooler Master Silent pro 700w
    Cooler master RC 690 w/ 6 fan 120mm

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Failure after return from long Hibernation

    It is a BIOS issue they have still not fully worked out for UDx model P45 boards

    What BIOS are you using anyway? Have you tried the latest Beta, it may be corrected for your board >>>
    http://forums.tweaktown.com/f69/giga...st-bios-28441/

  3. #3
    Join Date
    Jan 2009
    Posts
    50

    Default Re: Failure after return from long Hibernation

    Hi LSDmeasap,

    Thank you for your Help

    I was Hopping I don't have to flash my Bios From (f7)to the (F9b)
    frighten to brick my Mobo...Since I run rock solid 3.6
    But it is Very addictive and I would like to get to 4.0... 24/7
    So I take This opportunity to Make use of your Knowledge

    Note: temperature at 3.6 Idle 30c to 33c
    and During high usage 40c
    as for GPU 50c during high setting games...



    I attach the Bios set up on the next post since I have to much text....
    Last edited by camymic; 04-12-2009 at 05:06 PM.
    Core 2 Duo E8400 (E0)
    Gigabyte EP45-UD3P (F9 Bios)
    Cooler Master V8
    Corsair Dominator 1066 PC2 8500 C5 2x 2gb w/cooling fan
    (5.5.5.15 at 2.1v)
    Western Digital 640 blue caviar (2 unit)
    Palit Hd 4870 sonic dual cooler
    Cooler Master Silent pro 700w
    Cooler master RC 690 w/ 6 fan 120mm

  4. #4
    Join Date
    Jan 2009
    Posts
    50

    Default Re: Failure after return from long Hibernation

    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [ 9]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 3.60GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 401Mhz
    PCI Express Frequency (Mhz) ...........: 101

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.66D
    Memory Frequency (Mhz) ................: 1069
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15

    Advanced Timing Control
    tRRD...................................: 5
    tWTR...................................: 5
    tWR....................................: 6
    tRFC...................................: 54
    tRTP...................................: 4
    Command Rate (CMD) ....................: 2

    Driving Strength Profiles
    Driving Strength ......................: 1066

    Channel A
    Static tRead Value.....................: 8
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Channel B
    Static tRead Value.....................: 8
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.25625V
    CPU Termination.........1.200V.........: 1.200V
    CPU PLL.................1.500V.........: 1.500V
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.200V
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V
    ICH Core................1.100V.........: 1.100V

    DRAM
    DRAM Voltage............1.800V.........: 2.1V
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3..................: [Disabled]
    No-Execute Memory Protect..............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: [Disabled]
    x C4/C4E State Support.................: [Disabled]
    CPU Thermal Monitor 2(TM2) ............: [Enabled]
    CPU EIST Function......................: [Disabled]
    Virtualization Technology..............: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............: [Disabled]
    Core 2 Duo E8400 (E0)
    Gigabyte EP45-UD3P (F9 Bios)
    Cooler Master V8
    Corsair Dominator 1066 PC2 8500 C5 2x 2gb w/cooling fan
    (5.5.5.15 at 2.1v)
    Western Digital 640 blue caviar (2 unit)
    Palit Hd 4870 sonic dual cooler
    Cooler Master Silent pro 700w
    Cooler master RC 690 w/ 6 fan 120mm

  5. #5
    Join Date
    Mar 2009
    Location
    Bucharest, Romania
    Posts
    140

    Default Re: Failure after return from long Hibernation

    Are you sure those settings are stable? Have you tested with Prime95? Try upping the MCH voltage a bit.

    I don't use Hibernation (aka standby to HDD), i use S3 state aka suspend to RAM. Most of the times it works fine even after days of "sleep", but sometimes it doesn't respond when i hit the power button to restore from suspend, and i have to hit reset. It's just the way it is.

    But if it's doing it all the time for you, check your settings. As i told you, run Prime95 after a few hours to ensure your overclock is stable, and especially check the MCH voltage and RAM timings, as those are the most critical during that state.
    Pro hardware technician for PC, Laptop and Sound equipment.

  6. #6
    Join Date
    Jan 2009
    Posts
    50

    Default Re: Failure after return from long Hibernation

    Thank you for the tips

    so fare Orthos 5 hours ok
    20 pass intel burntest Pass
    OCCT 1 hour Pass
    I have try prime95 4 hours pass

    I will run prime95 again for a few hours to check again....

    so you recomend to increase the MCH voltage....
    From 1.200 to 1220 will be ok?
    Core 2 Duo E8400 (E0)
    Gigabyte EP45-UD3P (F9 Bios)
    Cooler Master V8
    Corsair Dominator 1066 PC2 8500 C5 2x 2gb w/cooling fan
    (5.5.5.15 at 2.1v)
    Western Digital 640 blue caviar (2 unit)
    Palit Hd 4870 sonic dual cooler
    Cooler Master Silent pro 700w
    Cooler master RC 690 w/ 6 fan 120mm

  7. #7
    Join Date
    Mar 2009
    Location
    Bucharest, Romania
    Posts
    140

    Default Re: Failure after return from long Hibernation

    Yes, it should be okay, you can go even higher if you need.
    Pro hardware technician for PC, Laptop and Sound equipment.

  8. #8
    Join Date
    Jan 2009
    Posts
    50

    Default Re: Failure after return from long Hibernation

    Hi Lsdmeasap....
    I see you are on the bridge
    so it take the opportunity to Ask your guidance to get close to 4.0

    I have posted earlier my stable setup at 3.6

    Thank you in advance
    Core 2 Duo E8400 (E0)
    Gigabyte EP45-UD3P (F9 Bios)
    Cooler Master V8
    Corsair Dominator 1066 PC2 8500 C5 2x 2gb w/cooling fan
    (5.5.5.15 at 2.1v)
    Western Digital 640 blue caviar (2 unit)
    Palit Hd 4870 sonic dual cooler
    Cooler Master Silent pro 700w
    Cooler master RC 690 w/ 6 fan 120mm

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Failure after return from long Hibernation

    So did you flash your BIOS? Just wondering, you will be fine just do not use @BIOS. Here is a Qflash guide I wrote if you are unsure of how to use it >>>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

    4Ghz, You have a good cooler right? If so, then I would suggest you try this.

    This will underclock your ram, so if you want it at or close to 1000 you would need to use 500 FSB and 2.00B/D Ram multi instead, or 9.5x420 and use 2.40B or 2.66D Ram multi (Many ways to go about it, not sure how you want to proceed so I will advise with 900Mhz ram for now) >>>


    Robust Graphics Booster ...............: [Auto or Fast]
    CPU Clock Ratio .......................: [ 9]
    Fine CPU Clock Ratio...................: +0.0
    CPU Frequency .........................: 4.05GHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled]
    CPU Host Frequency (Mhz) ..............: 450Mhz
    PCI Express Frequency (Mhz) ...........: 100

    C.I.A.2 ...............................: [Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)....................: 0ps

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: Auto
    System Memory Multiplier ..............: 2.00D (You can try 2.00B Later if you like)
    Memory Frequency (Mhz) ................: 900
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.......................: 4/5
    tRCD ..................................: 4/5
    tRP'...................................: 4/5
    tRAS...................................: 12/15

    ^^ At 900Mhz, you may be able to use 444-12 or 544-12 or 554-12 ^^

    Advanced Timing Control
    tRRD...................................: 3-4
    tWTR...................................:3-4
    tWR....................................: 4-6
    tRFC...................................: 52-58
    tRTP...................................: 3-5
    Command Rate (CMD) ....................: 2

    Driving Strength Profiles
    Driving Strength ......................: 1066

    Channel A
    Static tRead Value.....................: 6-8 (D Strap 2.00 may require higher tRD)
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Channel B
    Static tRead Value.....................: 6-8 (D Strap 2.00 may require higher tRD)
    tRD Phase0 Adjustment..................: [Auto]
    tRD Phase1 Adjustment..................: [Auto]
    tRD Phase2 Adjustment .................: [Auto]
    tRD Phase3 Adjustment..................: [Auto]

    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]

    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]

    Motherboard Voltage Control
    Voltage Type...........................: [Manual]

    CPU---------------------Normal-----------Current

    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.25625V << All up to your chip and all other settings, may need 1.26-1.38 actual

    CPU Termination.........1.200V.........: 1.200V << 1.225-1.28 (More may be needed, but I thought based on yoru stable Vcore above you may only need up to 1.28. 1.2-1.34 should be more then plenty for 4Ghz)

    CPU PLL.................1.500V.........: 1.500V << 1.5-1.58
    CPU Reference...........0.760V.........: [Auto]

    MCH/ICH
    MCH Core................1.100V.........: 1.200V << 1.20-1.26 may be needed for stability
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V << Set 1.55
    ICH Core................1.100V.........: 1.100V <<< 1.14-1.2 can help

    DRAM
    DRAM Voltage............1.800V.........: 2.1V
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]

  10. #10
    Join Date
    Jan 2009
    Posts
    50

    Default Re: Failure after return from long Hibernation

    Thank you Lsdmeasap

    I just go for it.........
    and Give it a try

    Will revert with results ASAP
    Core 2 Duo E8400 (E0)
    Gigabyte EP45-UD3P (F9 Bios)
    Cooler Master V8
    Corsair Dominator 1066 PC2 8500 C5 2x 2gb w/cooling fan
    (5.5.5.15 at 2.1v)
    Western Digital 640 blue caviar (2 unit)
    Palit Hd 4870 sonic dual cooler
    Cooler Master Silent pro 700w
    Cooler master RC 690 w/ 6 fan 120mm

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •