Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: ex38-ds4 F6b beta bios




  1. #11

    Default Re: ex38-ds4 F6b beta bios

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [9]
    Fine Clock Ratio ____________[0.0]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [333]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [3.20b]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 15

    ACT to ACT Delay (tRRD)_________ auto
    Rank Write to READ Delay________ auto
    Write to Precharge Delay_________ 64
    Refresh to ACT Delay______________ auto
    Read to Precharge Delay__________ auto
    Static tRead Value_______________ 12
    Static tRead Phase Adjust________ [Auto]

    CPU/PCIEX Clock Driving Control [800mV]tried every setting
    CPU Clock Skew Control [normal] tried every setting
    GMCH Clock Skew Control [Normal]tried every setting

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.400V] Set as max warranted voltage (2.5v)
    PCI-E OverVoltage Control_ [auto] Raise One Notch
    FSB OverVoltage Control___ [auto] Raise One Notch
    (G)MCH OverVoltage Control [+0.150V] Should need around 0.200v to be safe)
    CPU Voltage Control_______ [1.25]tried up to 1.40 Just keep as default

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Disabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect___________________[enabled] *Note* Must be enabled to flash from USB
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

  2. #12
    Join Date
    Apr 2009
    Posts
    15

    Default Re: ex38-ds4 F6b beta bios

    lol might have a memory problem, set your suggestions and get 16 beeps rapidly.

    Here are my settings that work flawlessly though thats what dont make sense.

    Robust Graphics Booster___________ [Turbo]
    CPU Clock Ratio ____________ [9]
    Fine Clock Ratio ____________[0.0]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [400] 3.6 ghz
    PCI Express Frequency (Mhz)_______ [auto]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00b]ddr2 800
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Extreme]

    CAS Latency Time________________ 4
    Dram RAS# to CAS# Delay_________ 4
    Dram RAS# Precharge Delay_______4
    Precharge Delay (tRAS)__________ 10

    ACT to ACT Delay (tRRD)_________ auto
    Rank Write to READ Delay________ auto
    Write to Precharge Delay_________ auto
    Refresh to ACT Delay______________ auto
    Read to Precharge Delay__________ auto
    Static tRead Value_______________ auto
    Static tRead Phase Adjust________ [Auto]

    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.450V]
    PCI-E OverVoltage Control_ [auto]
    FSB OverVoltage Control___ [auto]
    (G)MCH OverVoltage Control [+0.150V]
    CPU Voltage Control_______ [1.25] auto

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Disabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled

  3. #13
    Join Date
    Apr 2009
    Posts
    15

    Default Re: ex38-ds4 F6b beta bios


  4. #14

    Default Re: ex38-ds4 F6b beta bios

    Yeh mate, with unreliable results your looking at a memory/memory slot problem.

    Test each stick one by one in slot 1 using Memtest86+. Load optimized defaults and set just your memory strap so its 1066 and only MAIN timings to default 5,5,5,15.

    If one of the sticks fails here, you have your problem. If all pass, its a case you will need to test one dimm in each slot til you find the culiprit..annoying, but process of elimination.

    I would test at least 10 passes of memtest for each stick.
    Motherboard: Gigabyte GA-EP45-UD3R
    CPU: E8400 C0
    Memory: Team Xtreem Dark PC2 8500 DDR2 1066MHz CL5 (2*2GB)
    GPU: XFX GTX280
    Sound: Xonar HDAV Deluxe
    HDD's: WD VelociRaptor, WD Blue AAKS, WD Blue 2500BB
    PSU: Corsair HX620
    Case: Sharkoon Rebel12 Value
    CPU Cooler: Xigmatek Achilles S1284C
    Fans: Intake & Extract Top: Sharkoon 140MM 5v mod, Intake Bottom Opposite HDD's: Scythe 120mm Low RPM Drive Bay
    HDD's In 5.25 bay held in 2x Nexus DoubleTwins
    Disc Drives: Blu Ray/HDDVD LG GGCH20L, Pioneer DVR-216DBK
    Monitor: Samsung LE40M86B
    Receiver: Harman Kardon AVR255
    Speaker System: Q Accoustics 5.1i System

    Natalya Simonova: Do you destroy every vehicle you get into?
    James Bond: Standard operating procedure. Boys with toys.
    Goldeneye

  5. #15
    Join Date
    Apr 2009
    Posts
    15

    Default Re: ex38-ds4 F6b beta bios

    Kinda knew it was going to be that, Ive brutalized this memory since day 1. I was just hoping I missed something (knew I didnt). I ran this memory up to 1300mhz 5-5-5-15 2.5v on my vapochill with another ex38-ds4 but never could get beyond 1250 on this one. looks like its time to upgrade to ddr3. Thanks for your help. ALLEN

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ex38-ds4 F6b beta bios

    2.5V could be the issue, that may have damaged your ram even though it is rated to that amount.

    Let us know how your testing goes, and or if you need anymore help with this.

    I would try this for 1066 w/ those sticks if you get them all to pass Memtest86+ >>>

    Robust Graphics Booster___________ [Auto or Fast]
    CPU Clock Ratio ____________ [9]
    Fine Clock Ratio ____________[0.0]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [333]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [3.20b]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 15/18

    ACT to ACT Delay (tRRD)_________ 3-4
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-6
    Refresh to ACT Delay______________ 52-62
    Read to Precharge Delay__________ 3-5
    Static tRead Value_______________ 6/7-10
    Static tRead Phase Adjust________ [Auto] << Always Auto/Zero/1-31

    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [Auto]
    GMCH Clock Skew Control [Auto]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.400V] << I would think +0.2-0.3 should be plenty
    PCI-E OverVoltage Control_ [auto] << +0.1 for stability
    FSB OverVoltage Control___ [auto] << +0.1 for stability
    (G)MCH OverVoltage Control [+0.150V] << I suggest you try +0.2-0.3 here, 0.25 would be nice if you have .05 increments
    CPU Voltage Control_______ [1.25]Auto for now since we are talking stock

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Disabled] << Enabled
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect___________________[enabled] << Disable to rule this out as a issue for now

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •