Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: i7 gigabyte ud5 - oc settings - help




  1. #1
    Join Date
    Apr 2009
    Posts
    6

    Default i7 gigabyte ud5 - oc settings - help

    ok,
    here is my bios settings



    intel i7 920
    gigabyte x58 ud5
    patriot viper 1600ll (8-8-8-24 1600)


    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. Auto
    Uncore Frequency .......................... Auto (2880)
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................180
    PCI Express Frequency (MHz) ........... Auto

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................7
    tRCD ...................................7....
    tRP .....................................7....
    tRAS .....................................20..

    ##Channel A Advanced Timing Control##
    tRC .................................27....... (Should be = tRAS + tRP or above for stability)
    tRRD ..................................4.....
    tWTR ...................................4...
    tWR .....................................8...
    tWTP .......................................
    tWL ........................................ (tWTP Must = tWR + tWL + 4)
    tRFC ..................................60.....
    tRTP ....................................4...
    tFAW .....................................20.
    Command Rate (CMD) ................1

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ..............................Auto.
    QPI/VTT Voltage 1.150v ............Auto
    CPU PLL 1.800v .......................Auto

    MCH/ICH
    PCIE 1.500v ...........................Auto
    QPI PLL 1.100v .......................Auto
    IOH Core 1.100v .....................Auto
    ICH I/O 1.500v .......................Auto
    ICH Core 1.1v ........................Auto

    DRAM
    DRAM Voltage 1.500v .............Auto.
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]


    so basicly I only changed bclk to 180
    and memory timings

    and system won't boot

    when memory timings are on auto - systems boots up, cpu-z shows timings 10-9-9-25 which are little to high I guess

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: i7 gigabyte ud5 - oc settings - help

    Try these >>>

    If you want 1600Mhz ram speed exactly you are going to have to use more Blck (200) or use less (160)


    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled] << Disabled
    C3/C6/C7 State Support .................... [Enabled] << Disabled
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled] << Disabled
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC programs
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 16-17 (Memory Multi x 2)
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................180
    PCI Express Frequency (MHz) ........... 100

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo] << Set standard for now
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO] << Set 8 for now for 1440Mhz
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    *SORRY BUT.......*

    I need a link to your ram or the model # to best advise cause I do not even know if you are using 3x1/3x2/2x1/2x2? I will edit this once you provide that info


    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................7
    tRCD ...................................7....
    tRP .....................................7....
    tRAS .....................................20..

    ##Channel A Advanced Timing Control##
    tRC .................................27....... (Should be = tRAS + tRP or above for stability)
    tRRD ..................................4.....
    tWTR ...................................4...
    tWR .....................................8...
    tWTP .......................................
    tWL ........................................ (tWTP Must = tWR + tWL + 4)
    tRFC ..................................60..... 82
    tRTP ....................................4...
    tFAW .....................................20.
    Command Rate (CMD) ................1

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ..............................1.2-1.425 actual shown in CPU-z (All up to your CPU, you cannot use Auto though when overclocking so get ready to try to find your Vcore)

    QPI/VTT Voltage 1.150v ............ Set 1.2-1.35 (All depends on Ram/QPI/uncore speeds)
    CPU PLL 1.800v .......................1.8-1.84 should be good

    MCH/ICH
    PCIE 1.500v ...........................1.54
    QPI PLL 1.100v .......................1.1-1.2 should be good
    IOH Core 1.100v .....................1.1-1.24+ (Need to know ram)
    ICH I/O 1.500v .......................1.5
    ICH Core 1.1v .......................1.14-1.24

    DRAM
    DRAM Voltage 1.500v .............1.64-1.68
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  3. #3
    Join Date
    Apr 2009
    Posts
    6

    Default Re: i7 gigabyte ud5 - oc settings - help

    here is a link to my memory:


    Patriot Memory - Products

    I'll let you know if it worked

    thanks a lot

  4. #4
    Join Date
    Apr 2009
    Posts
    6

    Default Re: i7 gigabyte ud5 - oc settings - help

    here are my current settings:

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... Disabled
    C3/C6/C7 State Support .................... Disabled
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ Disabled
    Virtualization Technology ................... Disabled
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 16
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................180
    PCI Express Frequency (MHz) ........... 100

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... Standard
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ 8
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    *SORRY BUT.......*

    I need a link to your ram or the model # to best advise cause I do not even know if you are using 3x1/3x2/2x1/2x2? I will edit this once you provide that info

    ------

    Patriot Memory - Products

    ------


    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD ...................................8
    tRP .....................................8
    tRAS .....................................24

    ##Channel A Advanced Timing Control##
    tRC .................................auto
    tRRD ..................................auto
    tWTR ..................................auto
    tWR .....................................auto
    tWTP .......................................can't find it in bios
    tWL ........................................ can't find it in bios
    tRFC ..................................auto
    tRTP ....................................auto
    tFAW .....................................auto
    Command Rate (CMD) ................tried 1 or 2

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................auto



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ..............................1,375

    QPI/VTT Voltage 1.150v ............ 1,28
    CPU PLL 1.800v .......................1,8

    MCH/ICH
    PCIE 1.500v ...........................1.54
    QPI PLL 1.100v .......................1,14
    IOH Core 1.100v .....................1,14
    ICH I/O 1.500v .......................1.5
    ICH Core 1.1v .......................1,2

    DRAM
    DRAM Voltage 1.500v .............1.64
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]


    system won't boot when I set timings manually

    with above settings, after setting DRAM Timing Selectable to auto it boots and cpu-z shows 10-10-10-28 and CR = 1T


    I guess my problem is memory?

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: i7 gigabyte ud5 - oc settings - help

    Try this >>>

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... Disabled
    C3/C6/C7 State Support .................... Disabled
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ Disabled
    Virtualization Technology ................... Disabled
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 16 << Try 17 it is better and should be fine, but you can leave 16 for now if you like
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................180
    PCI Express Frequency (MHz) ........... 100

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... Standard
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ 8
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    *SORRY BUT.......*

    I need a link to your ram or the model # to best advise cause I do not even know if you are using 3x1/3x2/2x1/2x2? I will edit this once you provide that info

    ------

    Patriot Memory - Products

    ------


    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD ...................................8
    tRP .....................................8
    tRAS .....................................24

    ##Channel A Advanced Timing Control##
    tRC .................................32-34
    tRRD ..................................4-6
    tWTR ..................................4-6
    tWR ....................................8-12
    tWTP .......................................can't find it in bios
    tWL ........................................ can't find it in bios (Sorry must not be added for your model yet)
    tRFC ..................................72-84
    tRTP ....................................4-6
    tFAW .....................................30-34
    Command Rate (CMD) ................1

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................auto



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ..............................1,375 << Set more then this for now since you have LLC Disabled as this may only be 1.32-1.34 or so and your CPU may need more. Or enable LLC

    QPI/VTT Voltage 1.150v ............ 1,28-1.36
    CPU PLL 1.800v .......................1,8-1.86

    MCH/ICH
    PCIE 1.500v ...........................1.54
    QPI PLL 1.100v .......................1,20-1.24 << Bring this down later but set 1.20-124 for now to be sure it is not a issue for you
    IOH Core 1.100v .....................1,16-1.24 << Set 1.2 for now, lower later
    ICH I/O 1.500v .......................1.5
    ICH Core 1.1v .......................1.14

    DRAM
    DRAM Voltage 1.500v .............1.64 << Set 1.68 as 1.64 is actually about 1.63 or less
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  6. #6
    Join Date
    Apr 2009
    Posts
    6

    Default Re: i7 gigabyte ud5 - oc settings - help

    with your last settings system boots up


    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... Disabled
    C3/C6/C7 State Support .................... Disabled
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ Disabled
    Virtualization Technology ................... Disabled
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 17
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................180
    PCI Express Frequency (MHz) ........... 100

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... Standard
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ 8
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C


    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD ...................................8
    tRP .....................................8
    tRAS .....................................24

    ##Channel A Advanced Timing Control##
    tRC .................................32
    tRRD ..................................4
    tWTR ..................................4
    tWR ....................................8
    tWTP .......................................can't find it in bios
    tWL ........................................ can't find it in bios (Sorry must not be added for your model yet)
    tRFC ..................................72
    tRTP ....................................4
    tFAW .....................................30
    Command Rate (CMD) ................1

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................auto



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ..............................1,4

    QPI/VTT Voltage 1.150v ............ 1,3
    CPU PLL 1.800v .......................1,84

    MCH/ICH
    PCIE 1.500v ...........................1.54
    QPI PLL 1.100v .......................1,20 << Bring this down later but set 1.20-124 for now to be sure it is not a issue for you
    IOH Core 1.100v .....................1,20 << Set 1.2 for now, lower later
    ICH I/O 1.500v .......................1.5
    ICH Core 1.1v .......................1.14

    DRAM
    DRAM Voltage 1.500v .............1.64 (everything above 1,64 was market pink- didn't know if it's safe to rise)
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]



    cpu-z check out ok 8-8-8-24 1T

    should I now try to lower some of the voltages? what about dram performance enhance, leave it on standard?

  7. #7
    Join Date
    Apr 2009
    Posts
    6

    Default Re: i7 gigabyte ud5 - oc settings - help

    I noticed some stability problems with configuration below. Experienced several freezes, for example during video compression.

    Is it possible to change only memory frequency by lowering system memory multiplier and leaving other settings as they are?

    I feel that memory is causing problems and do not actually need them to work as 1600 mhz.




    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... Disabled
    C3/C6/C7 State Support .................... Disabled
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ Disabled
    Virtualization Technology ................... Disabled
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 17
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................180
    PCI Express Frequency (MHz) ........... 100

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... Standard
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ 8
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    Patriot Memory - Products


    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD ...................................8
    tRP .....................................8
    tRAS .....................................24

    ##Channel A Advanced Timing Control##
    tRC .................................32
    tRRD ..................................4
    tWTR ..................................4
    tWR ....................................8
    tWTP .......................................
    tWL ........................................
    tRFC ..................................72
    tRTP ....................................4
    tFAW .....................................30
    Command Rate (CMD) ................1

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................auto



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ..............................1,4

    QPI/VTT Voltage 1.150v ............ 1,3
    CPU PLL 1.800v .......................1,84

    MCH/ICH
    PCIE 1.500v ...........................1.54
    QPI PLL 1.100v .......................1,20 << Bring this down later but set 1.20-124 for now to be sure it is not a issue for you
    IOH Core 1.100v .....................1,20 << Set 1.2 for now, lower later
    ICH I/O 1.500v .......................1.5
    ICH Core 1.1v .......................1.14

    DRAM
    DRAM Voltage 1.500v .............1.68
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  8. #8

    Default Re: i7 gigabyte ud5 - oc settings - help

    disable "Intel(R) Turbo Boost Tech"

  9. #9
    Join Date
    Feb 2010
    Location
    sf, ca
    Posts
    6

    Default Re: i7 gigabyte ud5 - oc settings - help

    hi, i'm very new at overclocking (actually never done it before).

    i have a UD5 mobo, F10 bios, i7-920 CPU, a very large heatsink (ultra-120 extreme), and corsair dominator ram 3x2GB TR3X6G1600C8D G
    This memory has been verified to operate at 1600MHz at latencies of 8-8-8-24 at 1.65V VDIMM.
    can anyone help me figure out two things:

    1. what settings i should use for overclocking (it's at 2.8GHz with the built in "extreme" setting)

    2. how can i get the fans to automatically speed up/slow down based on temperatures? i'm trying to use speedfan but it's not doing anything

    thanks very much!

  10. #10
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: i7 gigabyte ud5 - oc settings - help

    Quote Originally Posted by joe2 View Post
    hi, i'm very new at overclocking (actually never done it before).

    i have a UD5 mobo, F10 bios, i7-920 CPU, a very large heatsink (ultra-120 extreme), and corsair dominator ram 3x2GB TR3X6G1600C8D Gcan anyone help me figure out two things:

    1. what settings i should use for overclocking (it's at 2.8GHz with the built in "extreme" setting)

    2. how can i get the fans to automatically speed up/slow down based on temperatures? i'm trying to use speedfan but it's not doing anything

    thanks very much!
    makesure pwm is enabled in bios for your fans,or on auto,floow my overclock guide in my sig for 3.8ghz overclock
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •