Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Gigabyte EP45-UD3P MemTest86+ Fails Memory After 8 Hours




  1. #11
    Join Date
    May 2008
    Location
    New South
    Posts
    19

    Default Re: Gigabyte EP45-UD3P MemTest86+ Fails Memory After 8 Hours

    fcastro, et al - I have a very similar board (UD3R) with 4gb (2x2) of the same type of ram. With all settings at default / auto the bios automatically detects the ram and sets the dram voltage to 2.096v. That's according to the PC Health Status page, though the MIT page still shows 1.8v under the "normal" heading. It also automatically sets the timings.

    I've run a number of different stress tests, some with the cpu overclocked, and I've had no stability problems. That said, try running memtest86+ with just 4gigs and see if you still get errors.

    OverDraught

    GA-EP45-UD3R w/ bios f8
    E8400 w/ stock cooling
    2x2gb OCZ PC2-8500
    Seagate Barracuda 7200.10 80gb on Intel controller (incl. the system partition)
    2x WD SE16 640gb raid-1 on jMicron controller
    XP x64
    and some other stuff <!-- / message -->

  2. #12
    Join Date
    Jan 2009
    Posts
    88

    Default Re: Gigabyte EP45-UD3P MemTest86+ Fails Memory After 8 Hours

    Hey all, well after adjusting the voltage to the correct 2.1v as my ram is rated and making the other changes ls recommended to mch etc I passed memtest86+ after 12 hours. So now I can continue with the OCing process.

    Thanks to all for there help :)
    Gigabyte Ep45-UD3P Motherboard (F10F Bios)
    ToughPower 650 PSU
    Intel Core 2 Quad Processor Q9300
    Windows XP x64
    8gb PC2-8500 (DDR2-1066) OCZ Reaper Memory
    500gb Seagate SATA Hard Drive
    20x LG SATA Dvd Burner
    Soundblaster Audigy Sound Card
    MSI ATI Radeon HD3850 512MB

  3. #13
    Join Date
    Jan 2009
    Posts
    88

    Question Re: Gigabyte EP45-UD3P MemTest86+ Fails Memory After 8 Hours

    Hey guys I went into EasyTuner6 after making all the changes and I checked what it was reporting for each memory slot. Is what I am seeing normal with slot 4? Tras is 124 while the others are all 15.

    Specs don't look correctly at all. My memory is SDRAM DDR2 1066 (PC2 8500) yet easytuner is seeing it at PC2-6400??







    Last edited by fcastro; 04-21-2009 at 11:57 AM.
    Gigabyte Ep45-UD3P Motherboard (F10F Bios)
    ToughPower 650 PSU
    Intel Core 2 Quad Processor Q9300
    Windows XP x64
    8gb PC2-8500 (DDR2-1066) OCZ Reaper Memory
    500gb Seagate SATA Hard Drive
    20x LG SATA Dvd Burner
    Soundblaster Audigy Sound Card
    MSI ATI Radeon HD3850 512MB

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •