Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: Help overclocking q9550 and ep45-ud3r




  1. #1
    Join Date
    Apr 2009
    Posts
    13

    Default Help overclocking q9550 and ep45-ud3r

    hey, im new to overclocking and just wanted an overclock to get me started! but still nice and fast :D
    here it is.
    Newegg.com - mushkin 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Desktop Memory

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 8x
    Fine CPU Clock Ratio.....................:+.5
    CPU Frequency ...........................: 2.83Ghz (333x8.5)
    
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 266Mhz
    PCI Express Frequency (Mhz) .........:Auto
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0
    
    
    DRAM Performance Control
    Performance Enhance...................: [turbo]
    Extreme Memory Profile (X.M.P.).....: auto
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: Auto
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [AUTO]
    
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12
    
    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................3
    tWTR..........................................3
    tWR............................................6
    tRFC...........................................52
    tRTP...........................................3
    Command Rate (CMD) ....................:0
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:7
    tRD Phase0 Adjustment...................:Auto 
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:6
    Twr2wr(Different Rank)...................:6
    Twr2rd(Different Rank)...................:5
    Trd2wr(Same/Diff Rank)..................:8
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Channel B
    Static tRead Value.........................:7
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:6
    Twr2wr(Different Rank)...................:6
    Twr2rd(Different Rank)...................:5
    Trd2wr(Same/Diff Rank)..................:8
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Motherboard Voltage Control
    
    CPU
    CPU Vcore….……….........................:
    
    CPU Termination…..... 1.200V*.......: 1.25
    
    CPU PLL…………………....1.500V*.......: 1.2
    
    CPU Referen.…………....0.755V*.......: 1.5
    
    CPU Reference2………,,0.800V*.......: .76
    
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.1
    MCH Reference….…….0.800V...........: .76
    MCH/DRAM Ref.…......0.900V...........: .9
    ICH I/O……………….....1.500V............: 1.5
    ICH Core…………...……1.100V............: 1.1
    
    DRAM
    DRAM Voltage ……....1.800V............: 1.8
    DRAM Termination .…0.900V............: .9
    Channel A Reference 0.900V............: .9
    Channel B Reference 0.900V............: .9
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled] 
    
    C2/C2E State Support....................: [Disabled] 
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled] 
    
    Virtualization Technology................: [Disabled] 
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help overclocking q9550 and ep45-ud3r

    Please give us more information, like what speed you want to run, what CPU you have, what motherboard, ect.

    I did a review on that memory and posted several sets of settings for various FSB Speed and ram speeds, if you would like to check that out while you wait for a reply back from me >>
    http://forums.tweaktown.com/f58/mush...-review-30282/

  3. #3
    Join Date
    Apr 2009
    Posts
    13

    Default Re: Help overclocking q9550 and ep45-ud3r

    sorry about that,

    well, i was messing around with the bios and achieved 3400.15 MHz (400x8.5) with a vcore of 1.3

    as for the speed.. i would like to get somewhere around 4GHz


    specs:

    q9550
    ep45-ud3r
    hd 4850
    zalman 9500
    coolermaster 690
    raptor 74g
    corsair 750tx
    mushkin 2x2gb ddr2 800
    windows xp pro

  4. #4
    Join Date
    Apr 2009
    Posts
    13

    Default Re: Help overclocking q9550 and ep45-ud3r

    and i did run prime95 for 5 hours today with that overclock (3400.15) and everything was fine.

  5. #5
    Join Date
    Apr 2009
    Posts
    13

    Default Re: Help overclocking q9550 and ep45-ud3r

    bump

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •