Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 33

Thread: GA-P35C-DS3R BSOD Issue




  1. #1
    Join Date
    Apr 2009
    Posts
    20

    Red face GA-EP35C-DS3R BSOD Issue

    This is my system config

    Intel Core 2 Quad Q9450 Processor

    Gigabyte GA-EP35C-DS3R Motherboard

    1 GB * 4 = DDR2 667 MHz RAM

    XFX nVIDIA 6200 GPU - 64 MB

    80 GB Seagate SATA HDD

    650W Antec Trio SMPS

    Cooler Master CM690 Cabinet

    2 x 120 MM Fans in the Cabinet for superior Air Circulation.

    OS - Windows Vista Service Pack 1 32-Bit

    My system works fine but suddenly it blue screens with the error which has been attached.

    I have checked the Hard Disks for Bad Sectors and for bad RAM sticks.
    Both have produced negative results as RAM and Disk have reported no problems.

    The CPU and Motherboard Temperature at full load are 37 Degree Celsius and 55 degree Celsius respectively.

    Please advise me as to what could be the problem.
    Last edited by arunraju; 06-24-2009 at 04:46 AM. Reason: Forgot to add OS Detail

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35C-DS3R BSOD Issue

    More Vcore is normally what that code is.

    Are you running stock? If so, or not, let me have your settings you are using and I will advise >>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    CPU = Model #
    Motherboard = Model, Revision #
    BIOS Version =
    Ram = Brand, Model#, Part#, And or Link

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ 
    Dram RAS# to CAS# Delay_________ 
    Dram RAS# Precharge Delay_______
    Precharge Delay (tRAS)__________ 
    
    ACT to ACT Delay (tRRD)_________ 
    Rank Write to READ Delay________ 
    Write to Precharge Delay_________ 
    Refresh to ACT Delay______________ 
    Read to Precharge Delay__________
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

  3. #3
    Join Date
    Apr 2009
    Posts
    20

    Default Re: GA-P35C-DS3R BSOD Issue

    Please explain what do you mean by this
    More Vcore is normally what that code is.

    Are you running stock? If so, or not, let me have your settings you are using and I will advise >>


    System Info
    CPU = Intel Core 2 Quad Q9450, 2.6 GHz
    Motherboard = Gigabyte GA-EP35C-DS3R, rev 2.1
    BIOS Version = F4a
    Ram = Corsair DDR2 667 MHz (1GB * 4 Numbers)

    System Summary Report has been attached.
    Please revert for any other info you need.

    Last edited by arunraju; 06-24-2009 at 04:47 AM.

  4. #4
    Join Date
    Apr 2009
    Posts
    20

    Default Re: GA-P35C-DS3R BSOD Issue

    Please find the CPU, RAM and Motherboard Details in the attachment.

    Free File Hosting Made Simple - MediaFire

    I also want to update that I have a Cooler Master CM690 Cabinet and Antec Trio 650W SMPS.






  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35C-DS3R BSOD Issue

    More Vcore means you need to set More CPU Vcore voltage in the BIOS.

    And what I meant by the rest was I need you to give me all your settings in the above table from your MIT Section of your BIOS, then I can advise back on what settings you should use.

    And I also do advise you update your BIOS using Qflash, here is a Guide >>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

    Are you using F10 or F4a? I advise you update to F10 as it is the latest, but I ask because you have said you are using both on this thread so I am not sure? Here is your BIOS page >>
    GIGABYTE - Support&Download - Motherboard - BIOS - GA-P35C-DS3R (rev. 2.1)

  6. #6
    Join Date
    Apr 2009
    Posts
    20

    Default Re: GA-P35C-DS3R BSOD Issue

    I have updated all the details you needed and uploaded the same as a file in Media Fire. Please download the same, analyze the issue and revert

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35C-DS3R BSOD Issue

    I do not see the post has been edited, are you sure you have done what you said?

    I just downloaded the file, it is not what I need anyway.

    All I need is your settings from the MIT Section of your BIOS, then I will advise changes for you to set back. You will have to manually write them down and then input them into the above template
    Last edited by Lsdmeasap; 04-28-2009 at 04:26 PM.

  8. #8
    Join Date
    Apr 2009
    Posts
    20

    Default Re: GA-P35C-DS3R BSOD Issue

    Sorry for not providing you with the correct info.

    I will write the info from the MIT Menu under BIOS and will update the thread.

  9. #9
    Join Date
    Apr 2009
    Posts
    20

    Default Re: GA-P35C-DS3R BSOD Issue

    When I try to do the BIOS Upgrade, I get this error "BIOS ID Check Error"

    Kindly update what should I do next

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35C-DS3R BSOD Issue

    Are you sure you downloaded the correct BIOS per your boards model and Revision? Like I said you mentioned two BIOS's you was using, please look in the corner of your board under the PCI Slots and check the board Revision, then grab the correct BIOS file per your boards revision.

    You still never answered me about what BIOS you are actually using now, please check and let me know. You can find out in CPU-z in the mainboard tab.

    Did you extract the file from the exe?

    You are using Qflash correct?

Page 1 of 4 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •