Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: GA-X58-UD3R temps




  1. #1
    Join Date
    Dec 2008
    Location
    UK
    Posts
    97

    Default GA-X58-UD3R temps

    Hi

    I am running a i7 920 at stock and with power management running to reduce voltages and temps etc etc but i think my temps are to high for a water cooled system

    CPU is 41-38-41-39, cpu voltage is 1.04
    NB IS 65

    This is with cpu running at 1600mhz after energysaver prog kicks in. I have reseated the waterblock several times but still no joy

    Are these temps normal for a I7 920 without any overclocking? or is there something wrong.

    thx in advance
    Griff


    I7 5280k @ 4.2
    ASUS X99-Deluxe II
    CRYORIG A80 AIO
    GTX 1070 Amp Extreme
    Samsung Evo polaris 250gb
    16Gb Avexir core red series
    Evga P2 750 wt
    Phantec Evolv Tg.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58-UD3R temps

    That does sound warm for stock, but load is what you need to worry about.

    Can you tell me more about your cooling setup, like what blocks you use, what rad, what thermal paste, and do you have the NB under water as well? Have you tried reseating the CPU Block a few times? You sure you are not using too much paste?

    What is your ambient?

    What voltages are you using? Give me your full settings and I can better see why you may be seeing such high temps >>>

    CPU = Model #
    Motherboard = Model, Revision #
    BIOS Version =
    Ram = Brand, Model#, Part#, And or Link

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency ..........................  (Always 2x memory Multi or 2x +1)
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................
    tRCD .......................................
    tRP .........................................
    tRAS .......................................
    
    ##Channel A Advanced Timing Control##
    tRC ........................................  (Should be = tRAS + tRP or above for stability)
    tRRD .......................................
    tWTR ......................................
    tWR ........................................
    tWTP .......................................
    tWL ........................................   (tWTP Must = tWR + tWL + 4)(tWL Must be CAS Latency -1)
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................
    
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................
    QPI/VTT Voltage 1.150v ............
    CPU PLL 1.800v .......................
    
    MCH/ICH
    PCIE 1.500v ...........................
    QPI PLL 1.100v .......................
    IOH Core 1.100v .....................
    ICH I/O 1.500v .......................
    ICH Core 1.1v ........................
    
    DRAM
    DRAM Voltage 1.500v ..............
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  3. #3
    Join Date
    Dec 2008
    Location
    UK
    Posts
    97

    Default Re: GA-X58-UD3R temps

    Hi
    After reseating the waterblock and applying the arctic silver 5 as per instructions from arctic silver website I now have temps of 38-34-37-35 @ 3.40 mhz. Under load using everest stress test they go up to 57-53-54-54. My northbridge is showing between 55 and 60 degrees...is this to hot. Below are my settings

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. auto
    Uncore Frequency .......................... auto
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................160
    PCI Express Frequency (MHz) ........... [100] auto

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... turbo
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ 10
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    Channel A Timing Settings:

    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................20

    ##Channel A Advanced Timing Control##
    tRC ........................................ (Should be = tRAS + tRP or above for stability)
    tRRD .......................................
    tWTR ......................................
    tWR ........................................
    tWTP .......................................
    tWL ........................................ (tWTP Must = tWR + tWL + 4)(tWL Must be CAS Latency -1)
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................



    Advanced Voltage Control:

    CPU

    Load Line Calibration ................. enabled
    CPU Vcore ...............................1.25
    QPI/VTT Voltage 1.150v ............1.150
    CPU PLL 1.800v .......................auto

    MCH/ICH
    PCIE 1.500v ........................... auto
    QPI PLL 1.100v .......................auto
    IOH Core 1.100v .....................auto
    ICH I/O 1.500v .......................auto
    ICH Core 1.1v ........................auto

    DRAM
    DRAM Voltage 1.500v ..............1.54
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

    anything I need to tweak or anything that i may have a problem with?

    thanks for you help.
    Griff


    I7 5280k @ 4.2
    ASUS X99-Deluxe II
    CRYORIG A80 AIO
    GTX 1070 Amp Extreme
    Samsung Evo polaris 250gb
    16Gb Avexir core red series
    Evga P2 750 wt
    Phantec Evolv Tg.

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58-UD3R temps

    Please set this to 100 >>
    PCI Express Frequency (MHz) ........... [100] << 100

    Those temps sound much better. Yes NB for X58 is warmer then P35/45 so that is normal

    Nothing in your settings looks to be set to high voltage wise so I think you should be good as far as temps go now that you have reseat your block. After a week or so they should go down some since you use Arctic Silver

    I'd need a link to your ram if you would like some full settings suggestions, but you can set these for sure without me knowing your ram info >>

    QPI Link Speed .............................. x36
    Uncore Frequency .......................... x20-21 (Always 2x ram Multi or 2x+1)

  5. #5
    Join Date
    Dec 2008
    Location
    UK
    Posts
    97

    Default Re: GA-X58-UD3R temps

    thanks for that mate. My memory is Kingston HyperX 6GB (3x2GB) Intel XMP DDR3 12800C9 1600MHz Tri-Channel Kit

    will set the settings in bios you have suggested. :)
    Griff


    I7 5280k @ 4.2
    ASUS X99-Deluxe II
    CRYORIG A80 AIO
    GTX 1070 Amp Extreme
    Samsung Evo polaris 250gb
    16Gb Avexir core red series
    Evga P2 750 wt
    Phantec Evolv Tg.

  6. #6
    Join Date
    Dec 2008
    Location
    UK
    Posts
    97

    Default Re: GA-X58-UD3R temps

    Any info on my memory please

    thx
    Griff


    I7 5280k @ 4.2
    ASUS X99-Deluxe II
    CRYORIG A80 AIO
    GTX 1070 Amp Extreme
    Samsung Evo polaris 250gb
    16Gb Avexir core red series
    Evga P2 750 wt
    Phantec Evolv Tg.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •