Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 27

Thread: GA-EP45-UD3P No POST (Video)




  1. #11
    Join Date
    Apr 2009
    Posts
    15

    Default Re: GA-EP45-UD3P No POST (Video)

    My settings are:

    OS: None Yet
    mobo: Gigabyte EP45-UD3P
    processor: Intel E8400
    fan/heatsink: Intel
    video card: ATA Radeon HD 4850
    ram: Crucial 4GB DDR2-800 (2x2GB)
    psu: Corsair TX650W


    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................:6x
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.00Ghz (333x6)
    
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333 Mhz
    PCI Express Frequency (Mhz) .........: 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................:  900
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 0ps
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [Auto]
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................ 5 Auto
    tRCD ......................................... 5 Auto
    tRP'...........................................5 Auto
    tRAS..........................................18 Auto
    
    
    Advanced Timing Control
    tRRD...........................................3
    tWTR..........................................3
    tWR............................................6
    tRFC...........................................52
    tRTP...........................................3
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................ auto
    
    Channel A
    Static tRead Value.........................:7
     tRD Phase0 Adjustment...................:Auto 
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................: 7
     tRD Phase0 Adjustment...................:Auto 
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    
    CPU
    CPU Vcore….……….........................:Auto 
    
    CPU Termination…..... 1.200V*.......: Auto 
    
    CPU PLL…………………....1.500V*.......: Auto
    
    CPU Referen.…………....0.755V*
    
    CPU Reference2………,,0.800V*
    
    MCH/ICH
    MCH Core…………….....1.100V
    MCH Reference….…….0.800V
    MCH/DRAM Ref.…......0.900V
    ICH I/O……………….....1.500V
    ICH Core…………...……1.100V
    
    DRAM
    DRAM Voltage ……....1.800V
    DRAM Termination .…0.900V
    Channel A Reference 0.900V
    Channel B Reference 0.900V
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] 
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]
    With my machine only being stable for about 20 seconds at a time, this took a while.

    advTHANKSance

  2. #12

    Default Re: GA-EP45-UD3P No POST (Video)

    Initial display is set to "PEG" in cmos?
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  3. #13
    Join Date
    Apr 2009
    Posts
    15

    Default Re: GA-EP45-UD3P No POST (Video)

    Quote Originally Posted by Tyreman View Post
    Initial display is set to "PEG" in cmos?
    Initial Display First [PCI]

  4. #14

    Default Re: GA-EP45-UD3P No POST (Video)

    Thats what i have to have mine at PEG
    Last edited by Tyreman; 04-22-2009 at 04:57 AM.
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  5. #15
    Join Date
    Apr 2009
    Posts
    15

    Default Re: GA-EP45-UD3P No POST (Video)

    Well, I'm pas the no POST (video) problem. I'm now trying to sort out stability. The machine starts, I can go to he BIOS Setup but the machine shuts don after a few/several seconds.

    I'm assuming that this is some BIOS setting that is causing the instability.

    Any thoughts?

  6. #16
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: GA-EP45-UD3P No POST (Video)

    If your video card is in the upper (blue) pci-e slot, set initial Display First [PEG].

    1) Turn off your computer and unplug the power cord to the psu.
    2) Remove the memory module from the #3 slot.
    3) Plug in the psu power cord and go into your bios.
    note: some bios settings contradict your earlier posts.
    4) make the following bios changes:
    Static tRead Value.........................: [8] <-- manually set this for both memory channels

    CPU

    CPU Vcore….………...... 1.xxxxxV ....: [Auto]<-- manually set this to the 1.xxxxx value shown in the bios

    CPU Termination…..... 1.200V*.......: [Auto] <-- manually set this to the value shown in the bios
    CPU PLL…………………....1.500V*.......: [Auto] <-- manually set this to the value shown in the bios

    MCH/ICH
    MCH Core .................. 1.100V ......: [Auto] <-- manually set this to 1.22 volts (1.16 volts might be needed)

    ICH I/O ...................... 1.500V ......: [Auto] <-- manually set this to the value shown in the bios
    ICH Core .................... 1.100V ......: [Auto] <-- manually set this to the value shown in the bios

    DRAM
    DRAM Voltage ............. 1.800V ......: [Auto] <-- manually set this to 2.00 volts

    Verify that all the other bios settings EXACTLY match the settings that you posted. If not, the problem might be with the other settings.

    Save settings and exit (still using only 1 memory module). If everything seems to be OK:
    repeat step 1
    install the second memory module
    repeat step 3
    pray that everything is now okie dokie
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  7. #17
    Join Date
    Apr 2009
    Location
    Montgomery, MN
    Posts
    58

    Default Re: GA-EP45-UD3P No POST (Video)

    Just another rookie type mistake, but check your HSF to ensure it is actually making a square contact with the CPU.

    Yeah, I did that once. The computer would shut off in a minute or less.

  8. #18
    Join Date
    Apr 2009
    Posts
    15

    Default Re: GA-EP45-UD3P No POST (Video)

    Well the rookie still struggles with the BIOS configuration. After many, many reboots I have the configuration shown below.

    My settings are:

    OS: None Yet
    mobo: Gigabyte EP45-UD3P
    processor: Intel E8400
    fan/heatsink: Intel
    video card: ATA Radeon HD 4850
    ram: Crucial 2GB DDR2-800
    psu: Corsair TX650W

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ..........: Auto
    CPU Clock Ratio ..................: 6x
    Fine CPU Clock Ratio..............: .0
    CPU Frequency ....................: 2.00Ghz (333x6)
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control............: [Enabled]
    CPU Host Frequency (Mhz) .........: 333 Mhz
    PCI Express Frequency (Mhz) ......: 100
    
    C.I.A.2 ..........................: [Disabled]
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...................: 800
    PCI Express Clock Drive...........:  900
    CPU Clock Skew (ps)...............: 0ps
    MCH Clock Skew (ps)...............: 0ps
    
    DRAM Performance Control
    Performance Enhance...............: [STANDARD]
    Extreme Memory Profile (X.M.P.)...: Disabled
    (G)MCH Frequency Latch............: [Auto]
    System Memory Multiplier .........: [Auto]
    Memory Frequency (Mhz) ...........: 800
    DRAM Timing Selectable ...........: [Manual]
    
    Standard Timing Control
    CAS Latency Time..................: 5 Auto
    tRCD .............................: 5 Auto
    tRP'..............................: 5 Auto
    tRAS..............................: 18 Auto
    
    Advanced Timing Control
    tRRD..............................:  3
    tWTR..............................:  3
    tWR...............................:  6
    tRFC..............................: 52
    tRTP..............................:  3
    Command Rate (CMD) ...............:  2
    
    Driving Strength Profiles
    Driving Strength .................: [Auto]
    
    Channel A
    Static tRead Value................: 8
    tRD Phase0 Adjustment.............: Auto 
    tRD Phase1 Adjustment.............: Auto
    tRD Phase2 Adjustment ............: Auto
    tRD Phase3 Adjustment.............: Auto
    Trd2rd(Different Rank)............: Auto
    Twr2wr(Different Rank)............: Auto
    Twr2rd(Different Rank)............: Auto
    Trd2wr(Same/Diff Rank)............: Auto
    Dimm1 Clock Skew Control..........: Auto  ps
    Dimm2 Clock Skew Control..........: Auto  ps
    
    Channel B
    Static tRead Value................: 8
    tRD Phase0 Adjustment.............: Auto 
    tRD Phase1 Adjustment.............: Auto
    tRD Phase2 Adjustment ............: Auto
    tRD Phase3 Adjustment.............: Auto
    Trd2rd(Different Rank)............: Auto
    Twr2wr(Different Rank)............: Auto
    Twr2rd(Different Rank)............: Auto
    Trd2wr(Same/Diff Rank)............: Auto
    Dimm1 Clock Skew Control..........: Auto  ps
    Dimm2 Clock Skew Control..........: Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………...: Manual
    
    CPU
    CPU Vcore ........................: 1.275
    CPU Termination ..................: 1.2 
    CPU PLL ..........................: 1.5
    CPU Referen ......................: .76 [Auto]
    
    MCH/ICH
    MCH Core ...............: 1.220V
    MCH Reference...........: 0.760V
    MCH/DRAM Ref............: 0.900V [Auto]
    ICH I/O ................: 1.500V 
    ICH Core ...............: 1.100V 
    
    DRAM
    DRAM Voltage  ..........: 2.000V [Auto]
    DRAM Termination .......: 0.900V [Auto]
    Channel A Reference ....: 0.900V [Auto]
    Channel B Reference ....: 0.900V [Auto]
    
    Advanced Settings
    Limit CPUID Max.: to 3.......: [Disabled]
    No-Execute Memory Protect....: [Enabled]
    CPU Enhanced Halt (C1E)......: [Disabled]
    C2/C2E State Support.........: [Disabled]
    x C4/C4E State Support.......: [Disabled]
    CPU Thermal Monitor 2(TM2) ..: [Enabled]
    CPU EIST Function............: [Disabled]
    Virtualization Technology....: [Disabled] 
    
    Integrated Peripherals
    Legacy USB Storage Detect ...: [Disabled]


    advTHANKSance
    Last edited by arolle; 04-22-2009 at 11:30 AM.

  9. #19
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: GA-EP45-UD3P No POST (Video)

    Hey doc, I've got a major headache! What's the cure? (Doctor gives a heavy sigh and thinks "I'm a doctor, not a mind reader).

    Well the rookie still struggles with the BIOS configuration.
    After many, many reboots I have the configuration shown below.
    OK, this doesn't sound good. What's the problem? Be specific.
    Is your system still stable for 20 seconds or less?
    Does the system hang? Auto reboot? Go into a reboot loop?
    Has anything improved? You are still past the initial video problem, right?

    Which bios version are you using?
    You'll see the version in the upper left portion of the 1st boot screen, where the number you want to note is F6, F7, etc.

    Does the bios look like this:
    Static tRead Value..........#.......: [8] (note # = some displayed number)
    or this:
    Static tRead Value..........8........: [Auto]

    like this?
    CPU Vcore ...............1.#####V.........: [1.27500]
    CPU Termination ......1.100V...............: [1.20]
    CPU PLL ...................1.500V...............: [1.50]

    like this?
    DRAM Voltage ..........: 2.000V.............: [Auto]
    or this?
    DRAM Voltage ..........: 1.800V.............: [2.00]

    I hate to be picky but accuracy is EVERYTHING!!!

    Hang in there, we'll get you through this.
    We need to get your system stable, then we'll get it spot on.

    Post back with a detailed description as to what specific problems you're having. Please err on the side of too much detail. Others sometimes describe their problems as:
    -My system won't boot.
    -My system hangs.
    -It beeps at me.
    etc.

    Stuff like the above 3 examples make me want to be a doctor.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  10. #20
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: GA-EP45-UD3P No POST (Video)

    One more thing:

    set the CPU Clock Ratio = 8

    How many memory modules are you booting with? 1 or 2?
    Last edited by profJim; 04-22-2009 at 01:50 PM.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •