Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: UD3R boot question

  1. #11
    Join Date
    Jan 2009

    Default Re: UD3R boot question

    Have you tried loading the BIOS default settings? If the boot problem then disappears, then it is probably a FSB setting.

    I had the same problem with an C2Q9450 which I overclocked to 3,2 GHz. Until I used a strap that was the same as the CPU default FSB (333 MHz).
    So you might want to experiment with the A, B, C or D straps if you haven't already done so.

    Good luck.

  2. #12
    Join Date
    Mar 2009

    Default Re: UD3R boot question

    Im using 2.40B strap.
    If I put strap on auto it sets it to 1000mhz speed while the stock speed is 800.
    Will it be ok on auto?

  3. #13

    Default Re: UD3R boot question

    what is it doing now?
    Asus P8Z68-V PRO/GEN3 bios 3202
    [email protected]
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660

  4. #14
    Join Date
    Mar 2009

    Default Re: UD3R boot question

    not tested it on auto yet as I need to wait till its a cold boot before I know if its still doing the same thing.

    Im at 333 x 9 atm for 3ghz
    should I change to 400 x 8?
    What voltages would I need to increase for that to be stable?
    Its on 1.331 vcore atm with everything else is on normal apart from RAM voltage, RAM strap and latency settings.

  5. #15
    2therock's Avatar
    2therock is offline Member
    Join Date
    Mar 2008
    N. GA US

    Default Re: UD3R boot question

    Your OK!
    Gigabyte GA-Z77X-UD5H WB Motherboard
    Intel Ivy Bridge i7 3770K clocked @ 4.5GHz
    16GB Kingston Hyper-X Genesis 2133 RAM
    Water cooling by XSPC RASA RS240 Kit
    Sapphire HD 6850 1GB DDR5 GPU
    1TB - RAID1 setup with Western Digital 6GB/Sec Drives
    Corsair HX750W Professional PSU
    Windows 7 Professional (x64) Build 7601

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts