Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: !!! Issues with UD3P !!!




  1. #11
    Join Date
    Apr 2009
    Posts
    6

    Default Re: !!! Issues with UD3P !!!

    Even with the old setup it gave me blue screens and froze rarely, probably twice a month but still annoyed me. Now for just a day its fine, I haven’t had any troubles.
    Last edited by northnyc; 04-26-2009 at 03:53 AM.
    Gigabyte UD3P rev. 1.0 BIOS F9 | Intel C2D E8400 (E0) | Xigmatek S1284EE with I7753 Bracket + AS5 |
    Crucial Ballistix 2x2GB DDR2 800 | Seagate 500GB 7200.11 32MB cache | BFG 9800 GTX | Corsair TX 750W |

  2. #12
    Join Date
    Apr 2009
    Posts
    6

    Default Re: !!! Issues with UD3P !!!

    tried 450x9 with same settings from above, same voltage as well and couldn`t power on.
    Will need either more voltage or better memory.
    what are the following:

    No execute memory protect?
    CPU Thermal monitor (TM2)?
    PCI Express seto to auto or 100?
    load line calibration?
    Gigabyte UD3P rev. 1.0 BIOS F9 | Intel C2D E8400 (E0) | Xigmatek S1284EE with I7753 Bracket + AS5 |
    Crucial Ballistix 2x2GB DDR2 800 | Seagate 500GB 7200.11 32MB cache | BFG 9800 GTX | Corsair TX 750W |

  3. #13

    Default Re: !!! Issues with UD3P !!!

    [QUOTE=northnyc;295955]tried 450x9 with same settings from above, same voltage as well and couldn`t power on.
    Will need either more voltage or better memory.
    what are the following:

    No execute memory protect? buffer attacks etc leave enabled
    CPU Thermal monitor (TM2)? cpu throttle back protect eanble
    PCI Express seto to auto or 100? 100
    load line calibration? reduces v drop on cpu volts when OC. though intel spec allows for v droop.
    Last edited by Tyreman; 04-27-2009 at 05:55 AM.
    Asus P8Z68-V PRO/GEN3 bios 3202
    2500k@4.7GHZ.
    CM Hyper 212 EVO blademasters push-pull
    8GB's Samsung 30nm tech ram 1.35v
    EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
    Seasonic X660
    Canada

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: !!! Issues with UD3P !!!

    If you still need help here post me your full settings that fail, and let me know how they fail and I can offer you some advice.

    You likely do need more Vtt (Termination) and possibly more MCH voltage, but I would need to know your memory multi choice that you tried above for 450 to advise

    What voltage amount does that 2.02 Memory setting give you actual? You can check in PC Health page or with Everest in the sensor section

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •