Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 55

Thread: EP45-UD3P (F9) - Backup BIOS Recovery Source?




  1. #31
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: EP45-UD3P (F9) - Backup BIOS Recovery Source?

    Ok, using the following currently with a couple of discrepencies, what should I be stability testing it with?

    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <---I don't have this option
    C2/C2E State Support -------------------- : [Disabled] <---I don't have this option
    x C4/C4E State Support ------------------ : [Disabled] <--- I don't have this option
    You can ignore these "missing" bios settings, as they don't apply to your cpu and ram.

    Initial testing is with Memtest86+. One full pass includes 8 tests. At the end of each pass it will continue with another pass until you manually stop it. If there any errors, stop the test, your system is not stable. Don't do any further testing. Make a note of the elapsed time of the failure and which test # failed. All the info is on the screen. The first time you run Memtest86+, let it run for 6 - 10 hours (or longer if possible). Subsequent tests (with different bios settings) can be as short as 1 or 2 passes.

    The following tests are all run in windows:
    IBT (Intel BurnTest)
    Prime95 (blend test)
    OCCT (blend test)
    Orthos (blend test)

    I run IBT first. A test session involves 5 - 10 or more test loops and will heat up your cpu more than any other stress testing program. Be sure to monitor your cpu core temps during this test.

    The remaining tests perform similar functions, so I only run one or two of these tests for at least 6 hours (longer is better). OCCT has a nice built-in logging feature that automatically generates temperature and voltage graphs for the duration of the test. You need to select the items that you want to monitor.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  2. #32

    Default Re: EP45-UD3P (F9) - Backup BIOS Recovery Source?

    Ok, going to have a go with...

    http://home.att.net/~chip.programmer...6.211a.iso.zip

    That the one you meant?
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  3. #33
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P (F9) - Backup BIOS Recovery Source?

    This is the ISO you want for Memtest86+ >>
    http://www.memtest.org/download/2.11...+-2.11.iso.zip

    Unzip only once

    Please post the exact full settings you used that failed and we can better advise. I see you mention you posted them plus your changes on the last page but I just want to be sure as you do have a few vcore variances

  4. #34

    Default Re: EP45-UD3P (F9) - Backup BIOS Recovery Source?

    Ok, using the template below I get the same error as before (BSOD) when booting into Windows...

    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Fast] 
    CPU Clock Ratio ......................: [8X] 
    CPU Frequency ........................: 3.20GHz( 401x8)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control 
    CPU Host Clock Control................: [Enabled] 
    x CPU Host Frequency(Mhz).............: 401
    PCI Express Frequency(Mhz)............: [100] 
    C.I.A.2...............................: [Disabled] 
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00B]
    Memory Frequency(Mhz).....800.........: 802
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time....................:  5
    x tRCD ...............................:  5
    x tRP.................................:  5
    x tRAS................................: 15 (18 gives same error)
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD................................: [ 4]
    x tWTR................................: [ 6]
    x tWR.................................: [ 6]
    x tRFC................................: [62]
    x tRTP................................: [ 5]
    x Command Rate (CMD) .................: [ 2]
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value..................: [10]
    x tRD Phase0 Adjustment...............: [ 0] Auto
    x tRD Phase1 Adjustment...............: [ 0] Auto
    x tRD Phase2 Adjustment ..............: [ 1] Auto
    x tRD Phase3 Adjustment...............: [ 1] Auto
    
    x Trd2rd(Different Rank)..............: [ 6] Auto
    x Twr2wr(Different Rank)..............: [ 6] Auto
    x Twr2rd(Different Rank)..............: [ 5] Auto
    x Trd2wr(Same/Diff Rank)..............: [ 8] Auto
    
    x DIMM1 Clock Skew Control (ps).......: [  ] Auto
    x DIMM2 Clock Skew Control (ps).......: [  ] Auto
    x DDR Write Training..................: [  ] Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: 800
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value..................: [10]
    x tRD Phase0 Adjustment...............: [ 0] Auto
    x tRD Phase1 Adjustment...............: [ 0] Auto
    x tRD Phase2 Adjustment ..............: [ 1] Auto
    x tRD Phase3 Adjustment...............: [ 1] Auto
    
    x Trd2rd(Different Rank)..............: [ 6] Auto
    x Twr2wr(Different Rank)..............: [ 6] Auto
    x Twr2rd(Different Rank)..............: [ 5] Auto
    x Trd2wr(Same/Diff Rank)..............: [ 8] Auto
    
    x DIMM1 Clock Skew Control (ps).......: [  ] Auto
    x DIMM2 Clock Skew Control (ps).......: [  ] Auto
    x DDR Write Training..................: [  ] Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: 800
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.32500V.......: [1.44375V]
    CPU Termination........1.200V.........: [1.440V] to [1.480V] (4 steps in total) Both give the same error as above.
    CPU PLL................1.500V.........: [1.610V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.240V]
    MCH Reference..........0.760V.........: [Auto]
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [1.570V]
    ICH Core...............1.100V.........: [1.200V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.100V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [Floppy]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    CPU Multi-Threading...................: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PCI]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    Memtest86+ passed the first Pass using the v2.11a ISO I grabbed originally and profJim's Stability settings, I am now running the v2.11 ISO from Lsd's link above until I receive further instructions.
    Last edited by D-an-W; 04-30-2009 at 05:29 PM.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  5. #35
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P (F9) - Backup BIOS Recovery Source?

    Well he just linked you to a initial Beta of 2.11 (2.11a), I linked the final version is all.

    I would suggest you try 2.00D or lower your FSB to 399, Vtt should not need to be above 1.4-1.45 for only 3.2Ghz. Try 2.00D memory multi and 1.38-1.44 Vtt and see how you get along.

    Some 65NM of course need more Vtt but generally you do not need 1.45-1.5 or more until you push on 3.4-3.6+

  6. #36

    Default Re: EP45-UD3P (F9) - Backup BIOS Recovery Source?

    2.00D and 1.440V Vtt got me into Windows but it froze after about 10 seconds, this then BSOD'd with the same error, I guess that's progress!

    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Fast] 
    CPU Clock Ratio ......................: [8X] 
    CPU Frequency ........................: 3.20GHz( 401x8)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control 
    CPU Host Clock Control................: [Enabled] 
    x CPU Host Frequency(Mhz).............: 401
    PCI Express Frequency(Mhz)............: [100] 
    C.I.A.2...............................: [Disabled] 
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 802
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time....................:  5
    x tRCD ...............................:  5
    x tRP.................................:  5
    x tRAS................................: 15 (18 gives same error)
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD................................: [ 4]
    x tWTR................................: [ 6]
    x tWR.................................: [ 6]
    x tRFC................................: [62]
    x tRTP................................: [ 5]
    x Command Rate (CMD) .................: [ 2]
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value..................: [10]
    x tRD Phase0 Adjustment...............: [ 0] Auto
    x tRD Phase1 Adjustment...............: [ 0] Auto
    x tRD Phase2 Adjustment ..............: [ 1] Auto
    x tRD Phase3 Adjustment...............: [ 1] Auto
    
    x Trd2rd(Different Rank)..............: [ 6] Auto
    x Twr2wr(Different Rank)..............: [ 6] Auto
    x Twr2rd(Different Rank)..............: [ 5] Auto
    x Trd2wr(Same/Diff Rank)..............: [ 8] Auto
    
    x DIMM1 Clock Skew Control (ps).......: [  ] Auto
    x DIMM2 Clock Skew Control (ps).......: [  ] Auto
    x DDR Write Training..................: [  ] Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: 800
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value..................: [10]
    x tRD Phase0 Adjustment...............: [ 0] Auto
    x tRD Phase1 Adjustment...............: [ 0] Auto
    x tRD Phase2 Adjustment ..............: [ 1] Auto
    x tRD Phase3 Adjustment...............: [ 1] Auto
    
    x Trd2rd(Different Rank)..............: [ 6] Auto
    x Twr2wr(Different Rank)..............: [ 6] Auto
    x Twr2rd(Different Rank)..............: [ 5] Auto
    x Trd2wr(Same/Diff Rank)..............: [ 8] Auto
    
    x DIMM1 Clock Skew Control (ps).......: [  ] Auto
    x DIMM2 Clock Skew Control (ps).......: [  ] Auto
    x DDR Write Training..................: [  ] Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: 800
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.32500V.......: [1.44375V]
    CPU Termination........1.200V.........: [1.440V]
    CPU PLL................1.500V.........: [1.610V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.240V]
    MCH Reference..........0.760V.........: [Auto]
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [1.570V]
    ICH Core...............1.100V.........: [1.200V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.100V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [Floppy]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    CPU Multi-Threading...................: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PCI]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  7. #37
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P (F9) - Backup BIOS Recovery Source?

    Have you tried less than stock MCH, like 1.05? Just wondering as some boards this is a magic fix on.

    Try less ICH and Driving strength profiles 1066

    Ahh, just drop the setup off over here and I will give it back to you at 3.6Ghz

    Ya know, I may be able to play with your setup from here and get you figured out Are you in XP or Vista? We will have to connect tonight either way, Ill make you a list of files I want in a folder on your desktop and we will connect via remote assistance.

    Charge is 100$ per hour J/K

    I should be able to figure things out from here, I have a few times for users but the BSOD's cause us to have to reconnect many times

  8. #38

    Default Re: EP45-UD3P (F9) - Backup BIOS Recovery Source?

    2.00D and 1.420Vtt had me into Windows It froze on me when opening IE8 (Last session) giving the same BSOD, strangely I can't get it to boot again with the same settings!?!

    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Fast] 
    CPU Clock Ratio ......................: [8X] 
    CPU Frequency ........................: 3.20GHz( 401x8)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control 
    CPU Host Clock Control................: [Enabled] 
    x CPU Host Frequency(Mhz).............: 401
    PCI Express Frequency(Mhz)............: [100] 
    C.I.A.2...............................: [Disabled] 
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 802
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time....................:  5
    x tRCD ...............................:  5
    x tRP.................................:  5
    x tRAS................................: 15 (18 gives same error)
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD................................: [ 4]
    x tWTR................................: [ 6]
    x tWR.................................: [ 6]
    x tRFC................................: [62]
    x tRTP................................: [ 5]
    x Command Rate (CMD) .................: [ 2]
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value..................: [10]
    x tRD Phase0 Adjustment...............: [ 0] Auto
    x tRD Phase1 Adjustment...............: [ 0] Auto
    x tRD Phase2 Adjustment ..............: [ 1] Auto
    x tRD Phase3 Adjustment...............: [ 1] Auto
    
    x Trd2rd(Different Rank)..............: [ 6] Auto
    x Twr2wr(Different Rank)..............: [ 6] Auto
    x Twr2rd(Different Rank)..............: [ 5] Auto
    x Trd2wr(Same/Diff Rank)..............: [ 8] Auto
    
    x DIMM1 Clock Skew Control (ps).......: [  ] Auto
    x DIMM2 Clock Skew Control (ps).......: [  ] Auto
    x DDR Write Training..................: [  ] Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: 800
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value..................: [10]
    x tRD Phase0 Adjustment...............: [ 0] Auto
    x tRD Phase1 Adjustment...............: [ 0] Auto
    x tRD Phase2 Adjustment ..............: [ 1] Auto
    x tRD Phase3 Adjustment...............: [ 1] Auto
    
    x Trd2rd(Different Rank)..............: [ 6] Auto
    x Twr2wr(Different Rank)..............: [ 6] Auto
    x Twr2rd(Different Rank)..............: [ 5] Auto
    x Trd2wr(Same/Diff Rank)..............: [ 8] Auto
    
    x DIMM1 Clock Skew Control (ps).......: [  ] Auto
    x DIMM2 Clock Skew Control (ps).......: [  ] Auto
    x DDR Write Training..................: [  ] Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: 800
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.32500V.......: [1.44375V]
    CPU Termination........1.200V.........: [1.420V]
    CPU PLL................1.500V.........: [1.610V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.240V]
    MCH Reference..........0.760V.........: [Auto]
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [1.570V]
    ICH Core...............1.100V.........: [1.200V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.100V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [Floppy]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    CPU Multi-Threading...................: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PCI]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    Last edited by D-an-W; 04-30-2009 at 07:57 PM.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  9. #39
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: EP45-UD3P (F9) - Backup BIOS Recovery Source?

    Something's not right. You're trying for a 33% overclock and it's not working.
    You can achieve the same results using 9 x 355 MHz and 2.00B or possibly 2.40B memory multipliers.
    If this setup proves stable, you could increase the cpu clock by 10 MHz increments, testing for stability at each step.

    This would be my approach:
    1) Perform stability test at standard settings (9 x 266 = 2.40 GHz and 3.00 x 266 = 800 MHz).
    2) Change the memory multiplier to 3.33D (266 x 2.33 = 886 memory speed) and test for stability.
    Hopefully your ram will o/c to at least 900 - 950 MHz.
    3) Test at 333 x 9 = 3.00 GHz with 333 x 2.40 = ddr2-800.
    4) Continue with higher cpu speeds while you keep your memory speeds below their maximum stable speed.

    It's possible that there are some underlying issues with your system that might not be apparent at stock settings.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  10. #40

    Default Re: EP45-UD3P (F9) - Backup BIOS Recovery Source?

    Morning PJ, somethings not right = Story of my life (j/k!)

    I will test those settings now...
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

Page 4 of 6 FirstFirst ... 23456 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •