Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: EP45-UD3R and e6320 OC




  1. #11
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: EP45-UD3R and e6320 OC

    The following should help:
    Code:
    DRAM Performance Control
    Performance Enhance....................: [Standard] <-- but now you'll need to manually set some memory timings
    Extreme Memory Profile (X.M.P.)......: [Disabled]
    
     Channel A + B
    Static tRead Value.......................: [10] <-- 9 might work
    
    CPU Vcore...............1.30000V.......: [1.39375]
    CPU Termination.........1.200V.........: [1.34] <-- too high or too low causes instability, 1.24 - 1.26 might be optimal
    
    MCH/ICH
    MCH Core.................1.100V..........: [1.36] <-- way too high, 1.22 - 1.26 usually works best (settings that are too high cause instability)
    
    Integrated Peripherals
    USB Storage Detection ..................: [Disabled] <-- Enabled is OK for stock setups


    Font size = 1 is a PITA to read.
    When you re-post your bios settings, you can highlight/select all the settings and click on the # icon to create a "code" section.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  2. #12
    Join Date
    Apr 2009
    Posts
    11

    Default Re: EP45-UD3R and e6320 OC

    I have done that, tried to set the timings I was recommended but, after several boots, I just couldn't get it be more stable so I've asked a mate who has the same RAMs but a different mobo to tell me the timings he is using. But he told me that one of his RAMs has died.
    What should I do?
    We both were using the RAMs at 500MHz, the difference is that I am using them at 2V-2.4V and he used them at 1.9V (I don't know about the timings).
    So, what should I do?

  3. #13
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: EP45-UD3R and e6320 OC

    Please add your cpu model to your signature.
    Your memory is rated at 2.0 - 2.1 volts. The highest you should possibly need is 2.12 volts.

    MCH Core = 1.40 is much higher than is usually needed for 2x2GB 8500 memory and you're using DDR2-8000 memory. MCH Core has a major effect on system stability, more is not always better.

    Trying lowering MCH core in steps to the 1.24 - 1.28 range and see if this improves stability. Your system is stable when you can run extended stability tests for six or more hours.

    After you've found the optimal MCH core, try lowering CPU Termination a bit. The general suggested setting is that this setting should be at lease 0.05 - 0.10 volts lower than CPU Vcore. Too much CPU Termination hurts stability.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  4. #14
    Join Date
    Apr 2009
    Posts
    11

    Default Re: EP45-UD3R and e6320 OC

    Oh Sorry, the CPU is an e6320 ^^

  5. #15
    Join Date
    Apr 2009
    Posts
    11

    Default Re: EP45-UD3R and e6320 OC

    I have:
    CPU Termination: 1.2V
    MCH Core: 1.22V

    Rised both a little bit but didn't get any results.

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3R and e6320 OC

    Please post me your full settings you are using now and I can help if you would like my advice also. Please do not use small (Or any actually) font changes on your settings posts, makes them hard to read

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •