Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB




  1. #1
    Join Date
    Mar 2009
    Posts
    56

    Default Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB

    Code:
     MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:    Auto 
    CPU Clock Ratio ..........................: 8x
    Fine CPU Clock Ratio.....................:  +0.5x
    CPU Frequency ...........................: 4.00 Ghz
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................:  [Enabled] 
    CPU Host Frequency (Mhz) ............:     471 Mhz
    PCI Express Frequency (Mhz) .........:     100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<<   900
    CPU Clock Skew (ps)....................: <<<      0
    MCH Clock Skew (ps)...................: <<<       0
    
    
    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....:   Disabled
    (G)MCH Frequency Latch...............:  [333]
    System Memory Multiplier ..............: 2.40B
    Memory Frequency (Mhz) ..............:   1130Mhz
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................  5 
    tRCD .....................................5 
    tRP'......................................5 
    tRAS......................................15 
    
    
    Advanced Timing Control
    tRRD...........................................4 auto
    tWTR..........................................5 auto
    tWR............................................6 auto
    tRFC...........................................52 auto
    tRTP...........................................5 auto
    Command Rate (CMD) ....................:       0 auto
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:8
    
     tRD Phase0 Adjustment...................:Auto 
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................: 8
     tRD Phase0 Adjustment...................:Auto 
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.36875 V-1.344 idle & load
    
    CPU Termination…..... 1.200V*.......: << 1.28
    CPU PLL…………………....1.500V*.......: << 1.500
    CPU Referen.…………....0.755V*.......: <<<  0.58%-0.67% of VTT
    
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.26-1.32
    MCH Reference….…….0.800V...........; <<<0.58%-0.67% of VTT
    MCH/DRAM Ref.…......0.900V...........: <<< 0.98
    ICH I/O……………….....1.500V............: <<< 1.500
    ICH Core…………...……1.100V............: <<< 1.100
    
    DRAM
    DRAM Voltage ……....1.800V............: 1.960 V
    DRAM Termination .…0.900V............: 0.98
    Channel A Reference 0.900V............: 0.98
    Channel B Reference 0.900V............: 0.98
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    Q9550 C1+Ep45-UD3R rev 1.1 F9+G.Skill PC8800 4GB
    With these settings my system ran 50 loops IBT& LinX & 12hours Prime Blend, but when i restart the system PC begin self restart and BSOD.Anyone can help me with advise.
    Excuse me for my bad english.
    Last edited by tonus; 04-30-2009 at 02:23 PM.

  2. #2
    Join Date
    Mar 2009
    Posts
    56

    Default Re: Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB

    I clock my CPU 8.5x471 stable with EP45-DS3P, but with EP45-UD3R is problem.

  3. #3
    Join Date
    Apr 2009
    Posts
    9

    Default Re: Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB

    With these settings my system ran 50 loops IBT& LinX & 12hours Prime Blend, but when i restart the system PC begin self restart and BSOD.Anyone can help me with advise.
    Excuse me for my bad english.
    Did you restart from a Stand By, or restart from a Turn Off?
    Some GA-EP45 motherboards (not UD3P) had memory & S3(STR) sleep (Stand By) related BSOD problems in Vista which was fixed with a new BIOS.
    I've had a BSOD in XP on a UD3R with G.Skill PC7200 4GB and wondering if the UD3R also needs a BIOS update?

  4. #4
    Join Date
    Mar 2009
    Posts
    56

    Default Re: Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB

    I'm with latest bios F9.I restart from a Turn off.My OS is Vista x64 SP1.
    I'll test tonight with S1(POS).
    Last edited by tonus; 05-01-2009 at 05:07 PM.
    i7-860(20x200)1.3v,Phanteks+3xTR TY-141, P55-UD6 F11d,G.Skill Trident PC 16000 9-9-9-27 1.6v 2x2 gb,Sapphire 7850 2gb OC, SSD Samsung 840pro 128gb,2x1TB WD BLUE 64MB SATA3 WD10EZEX,850W Seasonic M12 II Bronze SS-850AM, LG M2352D-PZ.

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB

    Can you post us a picture of Memtest so we can see what you get for all those AUTO Settings in your memory
    Tweakers.fr ~ Memset

  6. #6
    Join Date
    Mar 2009
    Posts
    56

    Default Re: Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB

    Now i'm at work.When i go home after 3 hours, i'll post a picture of Memset.
    Last edited by tonus; 05-01-2009 at 07:12 PM.
    i7-860(20x200)1.3v,Phanteks+3xTR TY-141, P55-UD6 F11d,G.Skill Trident PC 16000 9-9-9-27 1.6v 2x2 gb,Sapphire 7850 2gb OC, SSD Samsung 840pro 128gb,2x1TB WD BLUE 64MB SATA3 WD10EZEX,850W Seasonic M12 II Bronze SS-850AM, LG M2352D-PZ.

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB

    OK, well I may not be back in personally until 16 hours or so from now but maybe someone else can help you until then if you are here looking after work.

  8. #8
    Join Date
    Mar 2009
    Posts
    56

    Default Re: Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB

    i7-860(20x200)1.3v,Phanteks+3xTR TY-141, P55-UD6 F11d,G.Skill Trident PC 16000 9-9-9-27 1.6v 2x2 gb,Sapphire 7850 2gb OC, SSD Samsung 840pro 128gb,2x1TB WD BLUE 64MB SATA3 WD10EZEX,850W Seasonic M12 II Bronze SS-850AM, LG M2352D-PZ.

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB

    Thanks!

    None of those look to be to low set by Auto, here is what I would advise you work with

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 8x
    Fine CPU Clock Ratio.....................: +0.5x
    CPU Frequency ...........................: 4.00 Ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 471 Mhz
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 0
    MCH Clock Skew (ps)...................: <<< 0


    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333] << Auto
    System Memory Multiplier ..............: 2.40B << You may need to use 2.00D as your ram may not be stable at 400+ FSB using the B multi's

    Memory Frequency (Mhz) ..............: 1130Mhz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD .....................................5
    tRP'......................................5
    tRAS......................................15 / 18


    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-6
    tWR............................................4-6
    tRFC...........................................52-62
    tRTP...........................................3-5
    Command Rate (CMD) ....................: 2

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value.........................:8 << ( for now, 8 is pretty hard to keep stable using a B Multi above 400 FSB

    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................: 8 << ( for now, 8 is pretty hard to keep stable using a B Multi above 400 FSB
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.36875 V-1.344 idle & load << maybe a little more for now to be sure this is not your issue

    CPU Termination…..... 1.200V*.......: << 1.28-1.34
    CPU PLL…………………....1.500V*.......: << 1.55-1.58
    CPU Referen.…………....0.755V*.......: <<< Auto


    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.26-1.32 << Less, try 1.20-1.24
    MCH Reference….…….0.800V...........; <<<0.58%-0.67% of VTT << Auto or try .70-.74 When Vtt is at 1.20, then raise Vtt back up to what you want to use
    MCH/DRAM Ref.…......0.900V...........: <<< Auto
    ICH I/O……………….....1.500V............: <<< 1.555
    ICH Core…………...……1.100V............: <<< 1.14-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 1.9-1.95
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

  10. #10
    Join Date
    Mar 2009
    Posts
    56

    Default Re: Help Overclock Q9550 C1+Ep45-UD3R+G.Skill PC8800 4GB

    After 24h testing i'm desperate.I tryed many settings 2.00B, 2.40B,2.00D, MCH Core 1.2-1.42, Static tRead Value 8-11.
    My System only start with MCH Reference-0.76 when VTT is 1.2.
    i7-860(20x200)1.3v,Phanteks+3xTR TY-141, P55-UD6 F11d,G.Skill Trident PC 16000 9-9-9-27 1.6v 2x2 gb,Sapphire 7850 2gb OC, SSD Samsung 840pro 128gb,2x1TB WD BLUE 64MB SATA3 WD10EZEX,850W Seasonic M12 II Bronze SS-850AM, LG M2352D-PZ.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •