Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 8 of 8

Thread: need help overclocking ep45t-extreme with q6600




  1. #1

    Smile overclock up and working

    system specs

    <NOBR>board</NOBR> - ep45t-extreme
    <NOBR>cpu</NOBR> - <NOBR>q6600</NOBR> go
    cpu cooling - ocz vendetta 2
    memory - g-skill - f3-12800cl9t-6gbnq
    video - <NOBR>asus</NOBR> darknight 4870 - 1g
    <NOBR>hard drive</NOBR> - 2 x seagate 500 gig running raid
    <NOBR>case</NOBR> - antec 900
    os - vista ultimate <NOBR>64 bit</NOBR> - sp1
    psu - gamepwr 600w

    would like to clock between 3 to 3.2gh

    first time overclocking so bare with me

    also stock bios
    Last edited by ep45t-extreme; 05-13-2009 at 11:23 AM.

  2. #2
    Join Date
    Jan 2009
    Location
    Brisbane, Australia
    Posts
    75

    Default Re: need help overclocking ep45t-extreme with q6600

    Have you had a go yet?

    Heres my settings :)

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:Fast
    CPU Clock Ratio ..........................: 9
    CPU Frequency ...........................: 333x9
     
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:100
    C.I.A.2 .................................:[Disabled]
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: ops
    MCH Clock Skew (ps)...................: 0ps
     
    DRAM Performance Control
    Performance Enhance...................: Standard
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: You have DDR3 so set whatever is close to stock - I only use DDR2 atm
    System Memory Multiplier ..............: ""
    Memory Frequency (Mhz) ..............: ""
    DRAM Timing Selectable ................: [Manual]
    Standard Timing Control
    CAS Latency Time........................ ""
    tRCD ......................................... ""
    tRP'........................................... ""
    tRAS.......................................... ""
    Advanced Timing Control
    tRRD........................................... Auto
    tWTR.......................................... Auto
    tWR............................................ Auto
    tRFC........................................... Auto
    tRTP........................................... Auto
    Command Rate (CMD) ....................: Auto
    
    Driving Strength Profiles A & B
    
    Driving Strength ............................ Auto
    
    Channel A
    Static tRead Value.........................:""
     tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    Channel B
    Static tRead Value.........................:""
     tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.4V
    CPU Termination…..... 1.200V*.......: 1.3v
    CPU PLL…………………....1.500V*.......: 1.5v
    CPU Referen.…………....0.760V*.......: 0.760v
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.24V
    MCH Reference….…….0.760V...........: 0.760
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: 1.500V
    ICH Core…………...……1.100V............: 1.100V
    DRAM
    DRAM Voltage ……....1.800V............: ""
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto
    Advanced Settings
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]
    The "" means set whatever is closest to stock value. If it is stable, then lower the Vcore until it becomes unstable, then the same for PLL and CPU Termination (but do it one by one).
    CPU: Intel C2Q Q6600 G0 @ 3.2GHz W/ 1.184v (Max Overclock - 4.1GHz ON AIR)
    Mobo: Gigabyte EP45-UD3P (Max Overclock - 515FSB)
    RAM: CellShock 2GB PC2-8500 @ 1200MHz 5-5-5-15 (Max Overclock - 1300MHz 5-4-4-12)
    Video Card: Gainward HD4870 GS @ 775MHz/4000MHz (Max Overclock - 835MHz/1175MHz)
    Case: Antec 1200

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: need help overclocking ep45t-extreme with q6600

    I suggest first you update your BIOS to the latest Beta
    http://forums.tweaktown.com/f69/giga...st-bios-28441/

    F5g
    http://www.fileden.com/files/2008/7/...P45TEX.F5g.zip

    And then please read this for how to flash using Qflash as I do not suggest @BIOS.
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

    Once you have done that, loaded optimized defaults please give me a link to your ram so I can be sure as the model # you mention is a triple channel X58 kit

  4. #4

    Default Re: need help overclocking ep45t-extreme with q6600

    i have given it ago with everything on auto
    333 x 9
    and set vcore to 1.3250v wich is auto but of auto
    shuts down then loads up and working
    but now and then get a blue screen and also while swiching of computer then trying to loadup comp goes 2 ep45 green screen then blanks out resets once then loads up with original settings 2.4
    then i go back 2 bios and tells me somthing about volts incorrect
    boosted up to 1.4vcore still no go
    i reakon i have 2 change some ram frequencys or something like that
    my ram is G-skill ddr3 1600mhz pc3-12800
    2048mb x 3 ---- cl-9-9-9-24 red in colour
    model is -f3-12800cl9t-6gbnq
    but dont no how 2 do it
    first time i am overclocking
    so please be jentle
    like i said pretty much everything is on auto
    besides vcore up to 1.4v from 1.3250v auto
    multiplyer - x9
    cpu host freq - 333
    pci-e - 100
    doesnt load up with 1.4 vcore

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: need help overclocking ep45t-extreme with q6600

    So you have 3 sticks of ram or not? That is a triple channel kit made for i7 Systems, are you using all three or just two, or do you have a different kit then this?
    Newegg.com - G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Triple Channel Kit Desktop Memory - Desktop Memory

    Do you know which code you got in the BSOD Screen? 0x00000101 or 0x000000124 or some other random one (Like 0x0000020p) and not those two mentioned?

    Please give me your full settings and I will advise back full settings, you just want 333 FSB for 3Ghz Right?

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    CPU = Model #
    Motherboard = Model, Revision #
    BIOS Version =
    Ram = Brand, Model#, Part#, And or Link

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
    
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
    
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  6. #6

    Default Re: need help overclocking ep45t-extreme with q6600

    cpu model - Freq: 2.40 Ghz
    Core: 1.35v
    FSB: 1066 Mhz
    Socket:LGA775
    L2 Cache: 8MB
    PCG: 05A
    Prod Code: BX80562Q6600
    S-SPEC: SLACR
    MM#: 891337
    EAN UPC
    FPO/BATCH #: L823B313
    VER#: E32294-001
    PACK DATE: 10/13/08

    ram - f3-12800CL9T - 6GBNQ 1.5 - 1.6 VOLT
    http://newgskill.web-bi.net/bbs/view...desc=asc&no=48
    the 6gig kit
    Last edited by ep45t-extreme; 05-13-2009 at 11:09 AM.

  7. #7

    Default Re: need help overclocking ep45t-extreme with q6600

    BIOS SETTING WHEN TRYING TO CLOCK TO 3GHZ

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: x9
    Fine CPU Clock Ratio.....................:.HAVENT GOT
    CPU Frequency ...........................: 3.00ghz (333X9)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333 Mhz
    PCI Express Frequency (Mhz) .........:100
    C.I.A.2 .................................:[Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: AUTO
    Memory Frequency (Mhz) ..............: 1333
    DRAM Timing Selectable ................: [AUTO]
    Standard Timing Control
    CAS Latency Time........................ 9
    tRCD ......................................... 9
    tRP'...........................................9
    tRAS.......................................... 24

    Advanced Timing Control
    tRRD........................................... 4 (AUTO)
    tWTR.......................................... 5 (AUTO)
    tWR............................................ 10 (AUTO)
    tRFC........................................... 74 (AUTO)
    tRTP........................................... 5 (AUTO)
    Command Rate (CMD) ....................:0 (AUTO)
    Driving Strength Profiles
    Driving Strength ............................
    Channel A
    Static tRead Value.........................:6 (AUTO)
    tRD Phase0 Adjustment...................: 0 (Auto)
    tRD Phase1 Adjustment...................: 1 (Auto)
    tRD Phase2 Adjustment .................: 0 (Auto)
    tRD Phase3 Adjustment..................: 0 (Auto)
    Trd2rd(Different Rank)....................: 9 (Auto)
    Twr2wr(Different Rank)...................: 7 (Auto)
    Twr2rd(Different Rank)...................: 7 (Auto)
    Trd2wr(Same/Diff Rank)..................: 9 (Auto)
    Dimm1 Clock Skew Control...............:HAVENT GOT
    Dimm2 Clock Skew Control...............:HAVENT GOT
    Channel B
    Static tRead Value.........................:6 (AUTO)
    tRD Phase0 Adjustment...................: 0 (AUTO)
    tRD Phase1 Adjustment...................: 1 (AUTO)
    tRD Phase2 Adjustment .................: 0 (AUTO)
    tRD Phase3 Adjustment..................: 0 (AUTO)
    Trd2rd(Different Rank)....................: 9 (AUTO)
    Twr2wr(Different Rank)...................: 7 (AUTO)
    Twr2rd(Different Rank)...................: 7 (AUTO)
    Trd2wr(Same/Diff Rank)..................: 9 (AUTO)
    Dimm1 Clock Skew Control...............:AGAIN HAVENT GOT
    Dimm2 Clock Skew Control...............:HAVENT GOT
    Motherboard Voltage Control
    CPU
    CPU Vcore….……….........................:1.3250V (AUTO) DOESNT LOAD UP HAVE 2 PUT IN MANUAL AT 1.3250V when at 3ghz
    CPU Termination…..... 1.200V*.......:(AUTO)
    CPU PLL…………………....1.500V*.......:(AUTO)
    MCH/ICH
    MCH Core…………….....1.100V...........: (AUTO)
    MCH Reference….…….0.760V...........; (AUTO)
    MCH/DRAM Ref.…......0.900V...........: HAVENT GOT
    ICH I/O……………….....1.500V............: (AUTO)
    ICH Core…………...……1.100V............: HAVENT GOT
    DRAM
    DRAM Voltage ……....1.500V............: (AUTO)
    DRAM Termination .…0.900V............: (AUTO)
    Channel A Reference 0.750V............: (AUTO)
    Channel B Reference 0.750V............: (AUTO)
    Channel A Address VREF 750V (auto)
    Channel B Address VREF 750V (auto)
    Last edited by ep45t-extreme; 05-07-2009 at 10:49 AM.

  8. #8

    Default Re: need help overclocking ep45t-extreme with q6600

    flashing bios to latest now lets me overclock thank you,s all for the reply,s and making this possible for me
    I have clocked and working at 3ghz fine for now with a 5 hour stress test using prime 95


    Last edited by ep45t-extreme; 05-13-2009 at 11:08 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •