Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 10 of 89 FirstFirst ... 891011122060 ... LastLast
Results 91 to 100 of 890

Thread: GA-EP45-UD3P - Won't boot with 450FSB




  1. #91
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Nice! Onwards and Upwards indeed.

    take it nice and slowly now, up your over all CPU speed by 50-100 MHz at a time and adjust volts according to stability.

    I've just won an eBay auction for an E7300, so I may soon have more direct knowledge on how to best tune ref volts etc for a 45nm Dual core. my target is 3.8GHz, but I'd like 4GHz stable. 58 for a E7300 seems good. I'll do a prime run at stock first though to check I haven't been sold a dodgy CPU.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  2. #92

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Cheers P, I upped the FSB to 456, it booted fine and ran Prime for about 45mins before worker one failed so this morning I upped the VCore one notch and restarted it.

    What's a realistic figure for my E8400 because at the moment it feels like the Enegiser Bunny!!!
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  3. #93
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    No stopping at 450 and trying to get your ram down to 444-12? Just wondering, you know me

    Looks like you have made some nice progress though, good job!

  4. #94

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I had considered getting 4100MHz stable then trying to tighten the timings down. Any suggestions on where to start Lsd so I keep things safe etc?
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  5. #95
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Well if you want to make things easier on yourself, and be able to use better timings I would stick with 450 FSB so your ram is at 900. Then you should be able to do 444-12 once you find the proper MCH/MCH Ref/Vtt/Ram voltage combo

  6. #96

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    LSD telling me to slow down, I think he is an imposter!!!
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  7. #97
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I have had some luck with playing with

    >>>>> Advanced Clock Control..........: [Press Enter]
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [ 0ps]
    MCH Clock Skew........................: [ 0ps]

    Devoh

  8. #98

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Coming up to 12 hours of Prime with the following...

    Code:
    *************************************
    *************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F9
    *************************************
    *************************************
    
    ******************************
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Fast]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 4.10GHz( 456x9)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [456]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 900
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [ 5]
    x tRCD ...........................5...: [ 4]
    x tRP.............................5...: [ 4]
    x tRAS...........................18...: [12]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...: [ 4]
    x tWTR............................3...: [ 4]
    x tWR.............................6...: [ 8]
    x tRFC...........................52...: [68]
    x tRTP............................3...: [ 4]
    x Command Rate (CMD) .............0...: [ 2]
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [1.30625V]
    CPU Termination........1.200V.........: [1.280V]
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [0.835V]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.200V]
    MCH Reference..........0.760V.........: [0.778V]
    MCH/DRAM Reference.....0.900V.........: [0.910V]
    ICH I/O................1.500V.........: [1.590V]
    ICH Core...............1.100V.........: [1.200V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.080V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]


    Why does ET6 show a difference between Power On and Target as nothing has been adjusted since it was turned on?
    Last edited by D-an-W; 05-19-2009 at 01:14 AM.
    * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
    * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
    * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

  9. #99
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    I have a similar setup...

    Gigabyte GA-EP45-UD3P (rev 1.1) BIOS F9
    Zerotherm Z120 cooler
    Crucial Balistix PC6400 2x2G
    Intel E8500 E0 Stepping

    I am easily able to get above 500fsb. I'm still playing but here is what I'm using, and I'm sure I could go farther.

    Code:
    MB Intelligent Tweaker(M.I.T.) 
    ******************************
    Robust Graphics Booster ..............: [Fast]
    CPU Clock Ratio ......................:     [7X]
    x Fine CPU Clock Ratio................:   +0.0
    CPU Frequency ........................:    3.50GHz( 500x7)
    
    ********** Clock Chip Control ********
    
    >>>>>  Standard Clock Control
    CPU Host Clock Control................:     [Enabled]
    x CPU Host Frequency(Mhz).............:  [500]
    PCI Express Frequency(Mhz)............:  [100]
    C.I.A.2...............................:            [Disabled]
    
    >>>>> Advanced Clock Control..........: [Press Enter] 
    CPU Clock Drive.......................:        [800mV]
    PCI Express Clock Drive...............:      [900mV]
    CPU Clock Skew........................:       [ 300ps]
    MCH Clock Skew........................:      [  50ps]
    
    ******** DRAM Performance Control ********
    
    Performance Enhance...................:   [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................:  [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 1000
    DRAM Timing Selectable (SPD)..........: [Manual]
    
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [ 5]
    x tRCD ...........................5...:       [ 4]
    x tRP.............................5...:        [ 4]
    x tRAS...........................18...:      [12]
    
    >>>>> Advanced Timing Control.........: [Press Enter] 
    x tRRD............................3...:       [ 3]
    x tWTR............................3...:      [ 4]
    x tWR.............................6...:       [ 6]
    x tRFC...........................52...:      [54]
    x tRTP............................3...:       [ 3]
    x Command Rate (CMD) .............0...: [ 2]
    
    >>>>> Channel A Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel A Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    >>>>> Channel B Timing Settings.......: [Press Enter] 
    x Static tRead Value.............11...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    
    >>>>> Channel B Driving Settings......: [Press Enter] 
    x Driving Strength Profile............: [1066MHz]
    
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    
    ****** Motherboard Voltage Control ******
    
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.27500V.......: [AUTO]
    CPU Termination........1.200V.........: [AUTO]
    CPU PLL................1.500V.........: [AUTO]
    CPU Reference..........0.760V.........: [AUTO]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.220V]
    MCH Reference..........0.760V.........: [0.778V]
    MCH/DRAM Reference.....0.900V.........: [AUTO]
    ICH I/O................1.500V.........: [1.570V]
    ICH Core...............1.100V.........: [1.200V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.000V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [CDROM]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................:  Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]
    My thinking is to pick your target... Then using a 9 CPU clock multiplier (for you) what fsb do you need to be to get that speed. Then go with a combination of FSB, CPU Multiplier, and System Memory Multiplier (to get the memory to go as high as possible) to achieve that. This way your memory is as fast as possible.

    I know that my system can handle a 500FSB.. I wish to hit 4 to 4.1Ghz
    4100 / 9.5 = 432Mhz..
    4100 / 9.0 = 455Mhz
    4100 / 8.5 = 482Mhz
    4100 / 8.0 = 512Mhz
    4100 / 7.0 = 585Mhz

    Now I start playing with memory and System Memory Multipliers to see what let's me get to at least 432 on the FSB and my memory as fast as it will go. I try and keep the CPU multiplier as high as possible since when my machine is idling it automatically drops the multiplier to 6.0.. So I personally want the diff to be large to save more power. I'm weird.
    Last edited by devoh; 05-19-2009 at 02:34 AM.

  10. #100
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: GA-EP45-UD3P - Won't boot with 450FSB

    Have you tried IntelBurn test?? It REALLY stresses the CPU and memory. I have gone away from Prime95. IntelBurn Test will find in minutes what Prime95 takes hours to see.

    http://www.ultimate-filez.com/files/IntelBurnTest.zip

    The author claims IntelBurn Test uses the same code that Intel uses to test their chips. It causes my CPU temps to raise over 7 degrees higer that running Prime95.
    Last edited by devoh; 05-19-2009 at 02:46 AM.

Page 10 of 89 FirstFirst ... 891011122060 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •